Circuit Breaker, frame only

s
Item:
Circuit Breaker, frame only
Interruptor caja base
Disjoncteur de base
U.S. Cat. No.
Euro Order No.
NDG _F150
HDG_F150
LDG_F150
NFG _F250
HFG _F250
LFG _F250
3VL2015-1RA_0-0AA0
3VL2015-2RA_0-0AA0
3VL2015-3RA_0-0AA0
3VL3025-1RA_0-0AA0
3VL3025-2RA_0-0AA0
3VL3025-3RA_0-0AA0
For Use With Frame DG, FG
Para Usar Con Caja Base DG, FG
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Ø 1 mm-1.5 mm X 100 mm
Cal ISO 6789
NOTE - These instructions do not purport to cover all details or variations in
equipment, or to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further
information be desired or should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction
manual shall not become part of or modify any prior or existing agreement,
commitment or relationship. The sales contract contains the entire obligation
of Siemens. The warranty contained in the contract between the parties is
the sole warranty of Siemens. Any statements contained herein do not
create new warranties or modify the existing warranty.
Ø = .22“
[ Ø = 5.5 ]
5/16”
7mm
1/4”
5/32”
4mm
6mm
11/32“
7mm
NDG4F150 3VL2015-1RA40-0AA0
HDG4F150 3VL2015-2RA40-0AA0
LDG4F150 3VL2015-3RA40-0AA0
Trademarks - Unless otherwise noted, all names identified by ® are
registered trademarks of Siemens AG or Siemens Industry, Inc. The
remaining trademarks in this publication may be trademarks whose use by
third parties for their own purposes could violate the rights of the owner.
NFG4F250 3VL3025-1RA40-0AA0
HFG4F250 3VL3025-2RA40-0AA0
LFG4F250 3VL3025-3RA40-0AA0
NFG2F250
HFG2F250
LFG2F250
NFG3F250
HFG3F250
LFG3F250
NDG2F150
HDG2F150
LDG2F150
NDG3F150
HDG3F150
LDG3F150
3VL3025-1RA20-0AA0
3VL3025-2RA20-0AA0
3VL3025-3RA20-0AA0
3VL3025-1RA30-0AA0
3VL3025-2RA30-0AA0
3VL3025-3RA30-0AA0
1/ 6
8 0 6 8 0 2 A 0 2
3VL2015-1RA20-0AA0
3VL2015-2RA20-0AA0
3VL2015-3RA20-0AA0
3VL2015-1RA30-0AA0
3VL2015-2RA30-0AA0
3VL2015-3RA30-0AA0
I.L. No. 806802A02
DG / FG
1
Trip
[ Interrumpir ]
1
2
2
3
4
1
2
3
5
6
Ex: HFG3F250 / 3VL3025-2RA30-0AA0
HFG3
F250
2X 9 lb. in.
[ 1 Nm ]
HFG
HFG3F250
HFG3F250
cat. no
. HFG3
F250
250A
In=250
4X 4 lb. in.
[ 0.5 Nm ]
=
250A
In=250A
2/ 6
806802A02
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Test:
[ Prueba: ]
7
Trip
[ Interrumpir ]
ON / I
1
4
2
OFF / O
NDG_F150
HDG_F150
LDG_F150
NFG_F250
HFG_F250
LFG_F250
Trip
[ Interrumpir ]
6
OK
3
3VL2015 - 1RA_0 -0AA0
3VL2015 - 2RA_0 -0AA0
3VL2015 - 3RA_0 -0AA0
3VL3025 - 1RA_0 -0AA0
3VL3025 - 2RA_0 -0AA0
3VL3025 - 3RA_0 -0AA0
8
ON / I
5
7
OFF / O
Trip
.14”
[ Interrumpir ]
[ 3.5mm ]
2.0 lbf
[ 9.0 N ]
OK
8
11/32”
.06 - .12”
]
1
[ .5 - 3 mm
2X 19 lb. in.
[ 2.2 Nm ]
3/ 6
806802A02
DG
FG
4/ 6
806802A02
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Accessory
[ Accesorio ]
NDG _ F150 3VL2015-1RA _ _ - 0AA0
HDG _ F150 3VL2015-2RA _ _ - 0AA0
LDG _ F150 3VL2015-3RA _ _ - 0AA0
NFG _ F250 3VL3025-1RA _ _ - 0AA0
HFG _ F250 3VL3025-2RA _ _ - 0AA0
LFG _ F250 3VL3025-3RA _ _ - 0AA0
4
4
2
1/4
[ 6 mm ]
89 lb. in.
[ 10 Nm ]
3X 2
5 / 32
[ 4 mm ]
40 lb. in.
[ 4.5 Nm ]
2
2
1
1
clic
clic
3
3
3X - TMKF3 / 3VL9300-4TA31– M8 X 1.25 X 20mm
1X - TNKF / 3VL9300-4TB01– 5 / 16-18UNC X .75”
3X - TNKF3 / 3VL9300-4TB31–5 / 16-18UNC X .75”
Phase B
Phase C
4 Pole Application example:
[ Aplicación ejemplo de 4 polos :]
Phase A
TSSF3 3VL9300-8CB31
TSSF4 3VL9300-8CB41
General Information:
[ Información General: ]
Neutral
Accessory
[ Accesorio ]
3X - TMKD3 / 3VL9200-4TA31 - M6 X 1 X 20mm
1X - TNKD / 3VL9200-4TB01–10–32UNF X .75”
3X - TNKD3 / 3VL9200-4TB31–10–32UNF X .75”
N
1
3
5
Circuit
Breaker with
Unprotected
Neutral
N
2
4
6
LOAD Example
Customer Tramsformer
Phase C
Phase B
Phase A
Neutral
For Support in Europe refer to :
Bestell-Nr. / Order No.: 3ZX1012-0VL21-0AA1
Technical Support:
Subject to change without prior notice
Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.
Internet: www.siemens.de/lowvoltage/technical-assistance
Toll Free: 1-800-241-4453
5/ 6
GWA 4NEB 172 6802-10 DS 03
Internet: www.usa.siemens.com/powerdistribution
© Siemens Industry Inc. 2010
806802A02
Mounting Template / [ Patrón para el Montaje ]
2.07” ( 4P )
52.5 (4P)
[ 52.5 ]
.69”
2P, 3P & 4P )
17.5((3P&4P)
[ 17.5 ]
1.42”
[36
36 ]
.77”
19.5
[ 19.5 ]
2.68”
68
[ 68 ]
5.18”
131.5
[ 131.5 ]
1.34”
[ 34 ]
2.56”
65
[ 65 ]
.71”
[ 18 ]
1/4
1/2
3/4
1
in.
.69”17.5
( 2P,(3P&4P)
3P & 4P )
[ 17.5 ]
1
cm
2
3
4
5
2X Ø.217 ( 2P, 3P )
4X Ø.217 ( 4P )
[ 2X Ø5.5 (2P, 3P ) ]
2X Ø5.5 (3P)
[ 4X Ø5.5 (4P ) ]
4X Ø5.5 (4P)
Verify 1:1 scale before using
[ Verifique la escala de 1:1 antes de usar ]
6/ 6
Dg / Fg_MTG-Template.pdf
806802A02