Aluminum and Copper Wire Connector

s
U.S. Cat. No. Euro order. No.
Item:
Aluminum and Copper Wire Connector
Bornes de alimentación y cuerpo múltiples
Bornes de répartition
_TA4NG500
3TC4NG500
3TA4NG500H
_TA3NG750
3VL9750-4TH_1
3VL9750-4TH61
3VL9750-4TK31
3VL9775-4TG_1
For Use With Frame NG
Para Usar Con Caja Base NG
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
1/4“
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
5/16“
Cal. ISO 6789
NOTE - These instructions do not purport to cover
all details or variations in equipment, or to provide
for every possible contingency to be met in
connection with installation, operation or maintenance.
Should further information be desired or
should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes,
the matter should be referred to the local Siemens
sales office. The contents of this instruction
manual shall not become part of or modify any
prior or existing agreement, commitment or
relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in
the contract between the parties is the sole
warranty of Siemens. Any statements contained
herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names
identified by ® are registered trademarks of
Siemens AG or Siemens Industry, Inc.
The remaining trademarks in this publication may
be trademarks whose use by third parties for their
own purposes could violate the rights of the owner.
6X
5/16 – 18 UNC X 2.0”
6X
5/16 – 18 UNC X 3.0”
3TA4NG500 / 3VL9750-4TH31
4X
5/16 -18 UNCX 3.0”
2TA4NG500 / 3VL9750-4TH21
8X
5/16 – 18 UNC X 3.0”
4TA4NG500 / 3VL9750-4TH41
8X
5/16 – 18 UNC X 3.0”
4TA3NG750 / 3VL9775-4TG41
1/4
8 0 6 8 7 7 A 0 4
3TA4NG500H / 3VL9750-4TK31
I.L. No. 806877A04
4X
5/16 – 18 UNC X 3.0”
6X
5/16 – 18 UNC X 3.0”
2TA3NG750 / 3VL9775-4TG21
3TA3NG750 / 3VL9775-4TG31
1
6X
5/16 – 18 UNC X 3.0”
3TC4NG500 / 3VL9750-4TH61
Trip
[ Interrumpir ]
2
3
c li c
4
5
1/4“
6X 212 lb.in.
[ 24 Nm ]
6X
5/16 - 18 UNC x 1.25”
5/16”
2/4
806877A04
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
6
A
B
C
B
C
A
B
D
C
A
D
Wire Size
[ Rango Cable ]
Wire Connector
[ Conexión del cable ]
Cu / Al
500 kcmil
2TA3NG750 / 3VL9775-4TG21
3TA3NG750 / 3VL9775-4TG31
4TA3NG750 / 3VL9775-4TG41
2TA4NG500 / 3VL9750-4TH21
3TA4NG500 / 3VL9750-4TH31
4TA4NG500 / 3VL9750-4TH41
3TC4NG500 / 3VL9750-4TH61
3TA4NG500H / 3VL9750-4TK31
Req. UL 486A - 486B
Wire Stranding
( Cable )
CU / AL
Class B
CU
Class C
37
61
Cu / Al
600 – 750 kcmil
[ 300 mm2 ]
61
91
Cu / Al
1/0 – 4/0 kcmil
[ 70 – 95 mm² ]
19
37
Cu / Al
250 – 500 kcmil
[ 120 – 240 mm² ]
37
61
Cu Only
1/0 – 4/0 kcmil
[ 70 – 95 mm² ]
19
37
37
61
19
37
Cu Only
250 – 500 kcmil
[ 120 – 240 mm² ]
Cu / Al
1/0 – 4/0 kcmil
[ 70 – 95 mm² ]
Cu / Al
250 – 500 kcmil
[ 120 – 240 mm² ]
37
61
Wire Strip Length
[ Quitar ]
Torque
[ esfuerzo de
torsión ]
A
B
C
D
375 lb. in.
[ 42.4 Nm ]
3.0”
1.0”
2.0”
[ 25.4mm ] [ 50.8mm ] [ 76.2mm ]
375 lb. in.
[ 42.4 Nm ]
1.0”
2.0”
2.0”
1.0”
[ 25.4mm ] [ 25.4mm ] [ 50.8mm ] [ 50.8mm ]
375 lb. in.
[ 42.4 Nm ]
2.0”
2.0”
1.0”
1.0”
[ 25.4mm ] [ 25.4mm ] [ 50.8mm ] [ 50.8mm ]
375 lb. in.
[ 42.4 Nm ]
1.38”
[ 35mm ]
1.38”
[ 35mm ]
2.56”
[ 65mm ]
------
2.56”
[ 65mm ]
7
2
5/16“
375 lb.in.
[ 42 Nm ]
1
3/4
806877A04
9
8
4X 11 lb.in.
[ 1.2 Nm ]
3 Pole
TSLN3M /
[ Polos] 3VL9700-8CG31
TSLN4M /
4 Pole
[ Polos] 3VL9700-8CG41
10
For Support in Europe refer to :
Bestell-Nr. / Order No.: 3ZX1012-0VL68-5AA6
Technical Support:
Subject to change without prior notice
Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.
Internet: www.siemens.de/lowvoltage/technical-assistance
Toll Free: 1-800-241-4453
GWA 4NEB 179 6877-10 DS 04
Internet: www.usa.siemens.com/powerdistribution
© Siemens Industry Inc. 2010
4/4
806877A04