Compression Lugs

s
Euro Order No.
U.S. Cat. No.
item:
Compression Lugs
Bornes de Compresión
Connexion Compression
3CLJ350
3CLJ600
3CLJ750
6CLL350
6CLL600
3CLL750
3VL9435-4TM31
3VL9460-4TM31
3VL9475-4TM31
3VL9435-4TM61
3VL9460-4TM61
3VL9475-4TM31
For Use With Frame JG, LG
Para Usar Con Caja Base JG, LG
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
5/16“
6mm
Cal. ISO 6879
NOTE - These instructions do not purport to cover
all details or variations in equipment, or to provide
for every possible contingency to be met in
connection with installation, operation or maintenance.
Should further information be desired or
should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes,
the matter should be referred to the local Siemens
sales office. The contents of this instruction
manual shall not become part of or modify any
prior or existing agreement, commitment or
relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in
the contract between the parties is the sole
warranty of Siemens. Any statements contained
herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names
identified by ® are registered trademarks of
Siemens AG or Siemens Industry, Inc. The remaining
trademarks in this publication may be trademarks
whose use by third parties for their own
purposes could violate the rights of the owner.
- 3X
- 3X
- 3X
3X – M8 X 30mm
3CLJ350 / 3VL9435-4TM31
- 6X
- 3X
- 6X
3X - 3/8” X 2.50”
- 3X
6CLL350 / 3VL9435-4TM61
- 6X
- 3X
- 3X
- 6X
- 3X
3X - 3/8” X 2.50”
- 3X
3X – M8 X 30mm
- 3X
6CLL600 / 3VL9460-4TM61
3CLJ600 / 3VL9460-4TM31
- 3X
- 3X
- 3X
- 3X
- 3X
- 3X
3X – M8 X 35mm
3CLJ750 / 3VL9475-4TM31
3CLL750 / 3VL9475-4TM31
1/4
8 0 6 8 5 5 A 0 4
3X - 3/8” X 1.25”
I.L. No. 806855A04
2
1
3
Trip
[ Interrumpir ]
4
5
c l ic
6
3CLJ350 / 3VL9435-4TM31
6CLL350 / 3VL9435-4TM61
1.1”
[ 28mm ]
3CLJ600 / 3VL9460-4TM31
6CLL600 / 3VL9460-4TM61
7 No. of Crimps [ Cantidad de Compresiones ]
See table, pages 3/4 + 4/4
[ Ver tabla, paginas 3/4 + 4/4 ]
1.88”
[ 48mm ]
1
3CLJ750 / 3VL9475-4TM31
3CLL750 / 3VL9475-4TM61
3
2.12”
[ 54mm ]
2
2/4
806855A04
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
UL 486A - 486B
Compression Tool and Die chart for copper and aluminum conductors
[ Tabla de herramienta y molde para conductores de aluminio y cobre ]
Wire Size
[ Rango Cable ]
3CLJ350 / 3VL9435-4TM31
6CLL350 / 3VL9435-4TM61
350 kcmil
6 - 2 kcmil
[ 16 – 35 mm2 ]
1 – 4 / 0 kcmil
[ 50 – 95 mm2 ]
Tool Mfg.
[ Suplidor de
Herramienta ]
Tool No.
Die No.
[ Número de
[ Troquel
Herramienta ] Número de ]
Homac
UT - 15
T&B
TMB-15
Burndy
Y - 35
Kearny
WH - 2
Hubbell –
Anderson
VC - 6
Req. Wire Stranding
[ Cable ]
No. of Crimps
[Cantidad de
Compresiones ]
76
2
249
1
324
658
2
840
4
--------
1
250 – 350 kcmil
[ 120 – 150 mm2 ]
Compression Tool and Die chart for copper and aluminum conductors
[ Tabla de herramienta y molde para conductores de aluminio y cobre ]
Wire Size
[ Rango Cable ]
Tool Mfg.
[ Suplidor de
Herramienta ]
600 kcmil
250 – 500 kcmil
[ 150 – 240 mm2 ]
600 kcmil
[ 300 mm2 ]
Die No.
No. of Crimps
Tool No.
[ Troquel
[Cantidad de
[ Número de
Herramienta ] Número de ] Compresiones ]
UT - 15
160A
3
Burndy
Y -35
Y – 39
Y – 750
Y – 45
Y - 46
300
317
3
Kearny
WH - 2
1 5 /16
3
Hubbell –
Anderson
VC – 6 - FT
3/4
--------
CU
Class
C
37
61
7
19
19
37
37
61
UL 486A - 486B Req.
Wire Stranding [ Cable ]
Homac
3CLJ600 / 3VL9460-4TM31
6CLL600 / 3VL9460-4TM61
CU / AL
Class
B
CU / AL
Class
B
CU
Class
C
61
91
37
AL - ONLY
3
61
AL - ONLY
806855A04
UL 486A - 486B
Req. Wire Stranding
( Cable )
Compression Tool and Die chart for copper and aluminum conductors
[ Tabla de herramienta y molde para conductores de aluminio y cobre ]
Wire Size
[ Rango Cable ]
3CLJ750 / 3VL9475-4TM31
3CLL750 / 3VL9475-4TM31
750 kcmil
250 – 500 kcmil
[ 150 – 185 mm2 ]
600 – 750 kcmil
[ 240 - 300 mm2 ]
Tool No.
Die No.
No. of Crimps
[ Número de
[ Troquel
[Cantidad de
Herramienta ] Número de ] Compresiones ]
Tool Mfg.
[ Suplidor de
Herramienta ]
Homac
UT - 15
115H
3
Burndy
Y – 35
Y – 39
Y – 750
Y – 45
Y – 46
473
786
936
3
Kearny
WH - 2
1 5/16
3
Hubbell –
Anderson
VC – 6 - FT
--------
9a
8
CU / AL
Class
B
CU
Class
C
61
91
37
61
61
91
3
9b
2
LG
1
LG
6CLL350 / 3VL9435-4TM61
6CLL600 / 3VL9460-4TM61
Heat shrink Must extend to dimensions
shown after heating. [ El aislante debe
extenderse hasta la dimensión mostrada
después de ser calentado]
1.45” Min.
– 1.55” Max.
10
11
3CLJ350 / 3VL9435-4TM31
3CLJ600 / 3VL9460-4TM31
3CLJ750 / 3VL9475-4TM31
6CLL350 / 3VL9435-4TM61
6CLL600 / 3VL9460-4TM61
JG / LG
JG
6mm
6X 133 lb.in.
[ 15 Nm ]
LG
5/16”
6X 212 lb.in.
[ 24 Nm ]
4X 11 lb.in.
[ 1.2 Nm ]
For Support in Europe refer to :
Bestell-Nr. / Order No.: 3ZX1012-0VL68-3AA5
Technical Support:
Subject to change without prior notice
Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.
Internet: www.siemens.de/lowvoltage/technical-assistance
Toll Free: 1-800-241-4453
4/4
GWA 4NEB 179 6855-10 DS 05
Internet: www.usa.siemens.com/powerdistribution
© Siemens Industry Inc. 2010
806855A04