light and commercial truck tires llantas para camión
Transcripción
light and commercial truck tires llantas para camión
High Quality at a Great Value Excelente Calidad al Mejor Precio LIGHT AND COMMERCIAL TRUCK TIRES LLANTAS PARA CAMIÓN LIGERO Y PESADO Cosmo Tires Cosmo Tires’ main objective is to deliver “High Quality at Great Value”, truly giving our customer their money’s worth. At Cosmo Tires, we are always expanding our global market reach by adding new sizes and capacity to our range while always maintaining the highest quality standards. Our engineers make sure the quality of our Cosmo Tires meet and exceed our customer’s expectations. We are confident Cosmo Tires will fulfill your needs and allow you to have a brand that will grow alongside you. Warranty All Cosmo Tires are guaranteed against manufacture and material defects. In the event of premature failure caused by such defects, we will prorate said tire based on the tread depth remaining at the time of failure and apply the credit towards a new Cosmo tire. Cosmo Tires will not be held responsible for any downtime or damage caused by misuse or improper application of its products. All Cosmo Tires meet or exceed U.S. Department of Transportation requirements as well as ISO 9001 standards. Casing Allowance In normal highway service and off-road service, if within three years of date of manufacture a Cosmo truck tire becomes unserviceable and is not retreadable due to an adjustable condition in the casing, or if it does not provide one (1) retread of service, it is eligible for the applicable casing allowance. What is not Covered? ADJUSTMENTS WILL NOT BE MADE FOR: A. Tires that become unserviceable due to: i. Conditions resulting from road hazards, such as (A) impact damage, (B) cuts, (C) snags, or (D) punctures. ii. Conditions such as, but not limited to, uneven, supping, spotty, feathering tread wear resulting from (A) improper installation, (B) wheel misalignment, (C) tire/sheel assembly imbalance, (D) use of improper rim, (E) improper mounting or dismounting or (F) misapplication. iii. Conditions resulting from consumer damage, such as (A) improper tire and vehicle maintenance, (B) misuse, (C) abuse, (D) accident, (E) underinflation, (F) overloading, (G) over deflection, (H) failure to follow recommended rotation practices. B. Tires that are: i. Installed on any vehicle other than the vehicle on which they were first installed. ii. Altered in any manner (additional siping, buffing, stud pin holes, re-grooving, truing, etc.) iii. Improperly repaired or with repairs not conforming to the Rubber Manufacture’s Association standards. Llantas Cosmo El objetivo principal de las llantas Cosmo es el de ofrecer “Excelente Calidad al Mejor Precio”, brindándole al cliente más rendimiento por su dinero. En Cosmo Tires estamos en la constante expansión de nuestro mercado global, mediante la incorporación de nuevas medidas y el incremento de nuestra capacidad de producción, mientras mantenemos nuestros altos niveles de calidad. Cosmo Tires cuenta con ingenieros especializados encargados de garantizar que nuestras llantas satisfagan y excedan las expectativas de nuestros clientes. Estamos confiados que las llantas Cosmo cubrirán sus necesidades y le permitirán contar con una marca que crecerá junto con usted. Garantía Todos los productos Cosmo están garantizados contra defectos de fabricación y/o materiales. En caso de fallas prematuras por consecuencia directa de dichos defectos, Cosmo Tires aceptará reclamos por la porción de la llanta que no haya sido utilizada. El crédito será aplicado contra una llanta nueva. Cosmo Tires no será responsable por perjuicios, pérdidas o daños causados por el mal uso o desconocimiento de sus productos. Garantía de Carcasa En servicio de carretera y fuera de ella, si a 3 años de la fecha de fabricación una llanta Cosmo se vuelve inservible y no se puede recapar debido a una condición de ajuste en la carcasa, o si no le provee un (1) recape en servicio, la llanta será elegible para recibir el costo de una carcasa. ¿Qué No Cubre la Garantía? NO SE HARÁN AJUSTES EN: A. Llantas inservibles debido a: i. Condiciones que resulten de condiciones de carretera peligrosas, como (A) daño por impacto, (B) cortes, (C) grietas, o (D) punciones. ii. Condiciones como, pero no limitadas a, desgaste disparejo o parcial de la banda de rodamiento como resultado de (A) la instalación inapropiada, (B) la desalineación de los llantas, (C) el desbalance por ensamblado incorrecto de la llanta, (D) el uso inapropiado del rin, (E) la instalación o desinstalación inapropiada o (F) la mala aplicación. iii. Condiciones que resulten del daño del consumidor, como (A) el mantenimiento inapropiado de la llanta y del vehiculo, (B) el mal uso, (C) el abuso, (D) el accidente, (E) el insuficiente inflado, (F) la sobrecarga, (G) el sobre inflado, (H) el fallo en no seguir las prácticas de rotación recomendadas. B. Llantas que hayan sido: i. Instaladas en otro vehiculo que no sea el vehiculo donde fueron instalados originalmente. ii. Alteradas en alguna manera (como cortes en sus costados, raspados, tacos en la carcasa o vueltas a dibujar, etc…) iii. Reparadas inapropiadamente o siguiendo reparaciones que no cumplen con los estándares de la Asociación de Fabricantes de Hule (Rubber Manufacture’s Association). cosmotires.com BIAS TRUCK / Camión Convencional PLY Lonaje RIM WIDTH Ancho de Aro SECTION WIDTH Ancho de Sección 6.00-14 6.00-14 6.50-14 6.50-14 8 10 8 10 114 114 114 114 170 170 180 180 CHARACTERISTICS • Manufactured with state-of-the-art technology offering the highest quality ride and safety • This tread is designed to offer the utmost ventilation, which insures longer wear SIZE Tamaño PLY Lonaje RIM WIDTH Ancho de Aro 6.50-14 6.50-14 7.00-15 7.00-15 6.50-16 7.00-16 7.00-16 7.50-16 7.50-16 7.50-16 8.25-16 8.25-16 8 10 10 12 10 10 14 10 12 14 14 16 114 114 140 140 140 140 140 152 152 152 165 165 CHARACTERISTICS • Constructed with a special compound that insures longer tread life • The semi-lug dual service design offers a secure ride with superior traction • Extra strong casing allows loading SIZE Tamaño PLY Lonaje RIM WIDTH Ancho de Aro 7.00-15 7.00-15 10 12 12 10 14 10 12 14 14 16 14 14 16 16 16 18 140 140 140 140 140 152 152 152 165 165 165 178 178 190 203 216 650-16 7.00-16 7.00-16 7.50-16 7.50-16 7.50-16 8.25-16 8.25-16 825-20 9.00-20 9.00-20 10.00-20 11.00-20 12.00-20 CHARACTERISTICS • Constructed with the highest quality materials in order to offer the greatest value per mile/kilometer • Designed to work under the toughest conditions • The design offers superior stability and ride quality 600 710 690 800 420 530 420 530 420 530 420 530 • Construida con la más alta tecnología existente para que su rendimiento y seguridad sean óptimos • Una mayor separación en su diseño le permite tener mejor ventilación lo cual le proporciona más rendimiento SECTION WIDTH Ancho de Sección 180 180 200 200 185 200 200 215 215 215 235 235 LOAD/ Indice de Carga S (kg) D (kg) 775 900 1030 1150 975 1090 1215 1250 1400 1500 1705 1800 690 800 925 1030 860 950 1060 1120 1250 1320 1500 1600 PRESSURE/ Presión S (kpa) D (kpa) 420 530 530 630 530 530 630 530 630 740 630 730 420 530 530 630 750 530 630 530 630 740 630 730 CARACTERÍSTICAS • Construida con una fórmula especial para brindarle mayor rendimiento • Diseñada para un doble propósito ofreciéndole un rodaje seguro con mayor tracción • Carcasa más resistente a los golpes para así poder obtener más recapes SECTION WIDTH Ancho de Sección 200 200 185 200 200 215 215 215 235 235 235 259 259 278 293 315 LOAD/ Indice de Carga S (kg) D (kg) SIZE Tamaño PLY Lonaje TL/ TT LOAD/ Carga DIAMETER Diámetro SECTION WIDTH Ancho de Sección TREAD DEPTH Profundidad de Diseño S (kg) D (kg) S (psi) D (psi) 215/75R17.5 16 TL 135/133J 767 211 12.5 2180 2060 125 125 235/75R17.5* 18 TL 143/141J 797 233 12.5 2725 2575 125 125 215/75R17.5 14 TL 126/124M 767 211 12.5 1700 1600 101 101 225/70R19.5 14 TL 128/126L 811 226 12.5 1800 1700 110 110 245/70R19.5* 16 TL 136/134M 839 248 12.5 2240 2120 120 120 1030 1150 1060 1090 1215 1250 1400 1500 1705 1800 2205 2575 2900 3000 3350 3750 925 1030 925 950 1060 1120 1250 1320 1500 1600 1940 2300 2500 2650 2900 3350 530 630 630 530 630 530 630 730 630 730 810 770 880 810 810 810 530 630 750 530 630 530 630 730 630 730 740 700 810 740 740 740 • Construida con material de primerísima calidad para proporcionarle más millas/kilómetros por su dinero • Diseñada para trabajar en los caminos más exigentes • Su diseño brinda mayor estabilidad y un rodaje seguro PLY Lonaje RIM WIDTH Ancho de Aro 825-20 9.00-20 9.00-20 10.00-20 11.00-20 12.00-20 14 14 16 16 16 18 165 1018 1018 1055 1085 1125 235 178 178 190 203 216 LOAD/ Indice de Carga PRESSURE/ Presión S (kg) D (kg) S (kpa) D (kpa) 2205 259 259 278 293 315 1940 2575 2900 3000 3350 3750 810 2300 2500 2650 2900 3350 740 770 880 810 810 810 CARACTERÍSTICAS CHARACTERISTICS • • • • Modern pattern designed for all position service Outstanding high speed performance Excellent anti-wear performance Straight grooves and S-shaped stripes provide super stability for handling and a good breaking and anti-side skid performance • Llanta para ser utilizada en cualquier posición del vehículo al igual que en todo tipo de terreno • Excelente tracción • Excelente manejo • Diseño geométrico con dibujo especial para eliminar los daños de partiduras y permitir la salida del agua más fácilmente • Excelente rendimiento a altas velocidades SECTION WIDTH Ancho de Sección TREAD DEPTH Profundidad de Diseño 158L/160K 1072 389 165K 1124 422 PLY Lonaje TL/ TT LOAD/ Carga 385/65R22.5 20 TL 425/65R22.5 20 TL CHARACTERISTICS • Super single tire for trailer axle with excellent driving stability • Outstanding wear resistance and durability • Improved compound for reducing heat build-up PRESSURE Presión CARACTERÍSTICAS DIAMETER Diámetro SIZE Tamaño LOAD Indice de Carga LOAD Indice de Carga PRESSURE Presión S (kg) D (kg) S (psi) D (psi) 16 4500 - 130 - 16 5150 - 120 - CARACTERÍSTICAS • Excelente resistencia al desgaste y durabilidad • Compuesto mejorado para reducir la acumulación de calor PRESSURE/ Presión S (kpa) D (kpa) CARACTERÍSTICAS SIZE Tamaño • Manufactured with the most advanced compound in the industry, which allows for better cost per mile/ kilometer • The tread design delivers greater grip and performance whenever you need additional traction • Its superior casing offers greater security and the potential for more recaps 690 800 775 900 PRESSURE/ Presión S (kpa) D (kpa) CARACTERÍSTICAS SECTION WIDTH Ancho de Sección CHARACTERISTICS LOAD/ Indice de Carga S (kg) D (kg) • Fabricada con un compuesto de goma (hule) de la más alta tecnología, para brindarle mejor rodaje y mayor millaje/kilometraje • Su diseño ofrece más agarre cuando usted lo requiera, al igual que mayor potencia en su trabajo • Su carcasa super fuerte ofrece mayor seguridad y más recapes DIAMETER Diámetro SECTION WIDTH Ancho de Sección TREAD DEPTH Profundidad de Diseño 148/145M 1054 279 TL 149/146M 1104 16 TL 150/147L 12R22.5 18 TL 285/75R24.5 14 295/75R22.5 SIZE Tamaño PLY Lonaje TL/ TT LOAD/ Carga 11R22.5 16 TL 11R24.5 16 12R22.5 LOAD Indice de Carga PRESSURE Presión S (kg) D (kg) S (psi) D (psi) 15 3150 2900 120 120 279 15 3250 3000 120 120 1085 300 15 3350 3075 120 120 150/147L 1085 300 15 3350 3075 120 120 TL 144/141M 1050 283 15 2800 2575 110 110 14 TL 144/141M 1014 298 15 2800 2575 110 110 295/80R22.5 18 TL 152/150M 1044 298 16 3550 3350 125 125 315/80R22.5 18 TL 154/151L 1076 312 15 3750 3450 120 120 315/80R22.5 20 TL 156/153L 1076 312 15 4000 3650 125 125 CHARACTERISTICS • Ribbed pattern for all position service • Optimal rib division provides an even load distribution and a good anti-irregular wear performance • Suitable for high speed running CARACTERÍSTICAS • Diseño de carretera para ofrecer un mejor servicio en todas las posiciones • Lineas divisorias en su diseño proveenla distribución equitativa de la carga al igual que un gran rendimiento • Tambien puede ser usada en altas velocidades CT520 RADIAL TRUCK (Highway) / Camión Radial (Direccional) SIZE Tamaño RADIAL TRUCK (Semi) / Camión Radial (Semi) SECTION WIDTH Ancho de Sección TREAD DEPTH Profundidad de Diseño 148/145M 1054 279 TL 149/146M 1104 16 TL 150/147L 20 TL 156/153K PLY Lonaje TL/ TT LOAD/ Carga 11R22.5 16 TL 11R24.5 16 12R22.5 315/80R22.5 D (kg) S (psi) D (psi) 16.5 3150 2900 120 120 279 14.5 3250 3000 120 120 1085 300 16.5 3350 3075 120 120 1076 312 16 4000 3650 125 125 • All position tire for on and off road, construction and log carrying applications • Excellent in both steering and traction • Special groove geometry designed to eliminate pattern damage and to drain water • Outstanding high-speed performance PLY Lonaje TL/ TT LOAD/ Carga 12.00R24 20 TT 160/157K PRESSURE Presión S (kg) CHARACTERISTICS SIZE Tamaño LOAD Indice de Carga TREAD DEPTH Profundidad de Diseño 1226 315 15.5 CHARACTERISTICS • All position tire for on and off road • Excellent in both steering and traction • Special groove geometry is designed to eliminate pattern damage and to drain water • Outstanding high-speed performance LOAD Indice de Carga PRESSURE Presión S (kg) D (kg) S (psi) D (psi) 4500 4125 130 130 TREAD DEPTH Profundidad de Diseño 150/147L 1085 300 TL 150/147L 1085 TL 152/148L 1044 TL/ TT LOAD/ Carga 12R22.5 16 TL 12R22.5 18 295/80R22.5 18 CT603 SIZE Tamaño PLY Lonaje TL/ TT LOAD/ Carga 315/80R22.5 20 TL 156/153L CHARACTERISTICS DIAMETER Diámetro SECTION WIDTH Ancho de Sección 1082 312 20 • All position tire for on and off road • Excellent in both steering and traction • Special groove geometry is designed to eliminate pattern damage and to drain water • Outstanding high-speed performance LOAD Indice de Carga PRESSURE Presión S (kg) D (kg) S (psi) D (psi) 4000 3650 125 125 CT958 3075 120 120 300 18 3350 3075 120 120 298 18 3550 3150 125 125 279 149/146L 1104 279 16 TL 11R24.5 16 TL S (psi) D (psi) 18 3150 2900 120 120 20 3250 3000 120 120 CARACTERÍSTICAS • Diseño de tracción profundo con buen uso hasta en las áreas de manejo • Bloques más largos y profundos para proporcionarle un manejado más fuerte y con mayor agarre • La profundidad en su diseño le brinda más millaje/ kilometraje • El diseño a la mitad del hombro, previene que el hombro se rompa o se despedase TREAD DEPTH Profundidad de Diseño 148/145L 1054 279 149/146L 1104 279 TL/ TT LOAD/ Carga 11R22.5 16 TL 11R24.5 16 TL • Deep lug pattern for driving service • Extra deep tread provides an extra powerful traction and long tread life • Closed shoulder maintains good irregular wear resistance • Small protrusions in the grooves enhance the self-cleaning ability and prevent stone-picking SIZE Tamaño PLY Lonaje TL/ TT LOAD/ Carga 12.00R24 20 TT 160/157K PRESSURE Presión D (kg) SECTION WIDTH Ancho de Sección PLY Lonaje LOAD Indice de Carga S (kg) DIAMETER Diámetro SIZE Tamaño CHARACTERISTICS 3350 1054 11R22.5 CARACTERÍSTICAS • Diseño de carretera para un mejor servicio en todas las posiciones y en todo tipo de terrenos • Excelente rendimiento a altas velocidades • Excelente resistencia al desgaste • Las líneas de su dibujo proveen un excelente rendimiento al conducir y mayor agarre 18 148/145L LOAD/ Carga CHARACTERISTICS TREAD DEPTH Profundidad de Diseño D (psi) TREAD DEPTH Profundidad de Diseño TL/ TT • Deep lug pattern for driving service • Large blocks and deep grooves provide a powerful drive and a strong grip • The deep tread depth assures long mileage • Half-closed shoulder prevents the shoulder blocks from cracking • Diseño de carretera para un mejor servicio en todas las posiciones y en todo tipo de terrenos • Excelente rendimiento a altas velocidades • Excelente resistencia al desgaste • Las líneas de su dibujo proveen un excelente rendimiento al conducir y mayor agarre S (psi) • Diseño de tracción, usable hasta en las ruedas de manejo • El dibujo en bloques provee un excelente rendimiento al conducir y mayor agarre • La profundidad en la banda de rodamiento asegura un gran millaje/kilometraje • Al descontinuar la linea del centro se previenen rupturas CHARACTERISTICS CARACTERÍSTICAS D (kg) SECTION WIDTH Ancho de Sección PLY Lonaje PRESSURE Presión S (kg) DIAMETER Diámetro SIZE Tamaño LOAD Indice de Carga CARACTERÍSTICAS • Deep lug pattern for driving service • The combination of blocks provides a super driving performance and a strong grip • The deep tread depth assures long mileage • The discontinuity of center rib prevents the center rib from rupture • Diseño de carretera para un mejor servicio en todas las posiciones • Excelente rendimiento a altas velocidades • Excelente resistencia al desgaste • Las líneas de su dibujo proveen un excelente rendimiento al conducir y mayor agarre SECTION WIDTH Ancho de Sección SECTION WIDTH Ancho de Sección PLY Lonaje CHARACTERISTICS CARACTERÍSTICAS DIAMETER Diámetro DIAMETER Diámetro SIZE Tamaño RADIAL TRUCK (Lug) / Camión Radial (Tracción) DIAMETER Diámetro SIZE Tamaño PRESSURE Presión S (kg) D (kg) S (psi) D (psi) 24 3150 2900 120 120 24 3250 3000 120 120 CARACTERÍSTICAS • Diseño de tracción profundo con buen uso hasta en las áreas de manejo • La profundidad extra en su dibujo de tracción le proporciona más poder y fuerza, también más duración en la vida del llanta • El tener hombros cerrados en su diseño le permite mantener buena resistencia al desgaste • Pequeñas protuberancias en las líneas de su dibujo hace que sea autosuficiente para mantenerse limpia y no recoger piedras pequeñas DIAMETER Diámetro SECTION WIDTH Ancho de Sección TREAD DEPTH Profundidad de Diseño 1238 315 20.5 • Deep tread steel radial • Specifically designed for on and off-road use LOAD Indice de Carga CARACTERÍSTICAS LOAD Indice de Carga PRESSURE Presión S (kg) D (kg) S (psi) D (psi) 4500 4125 130 130 • Diseño de labrado profundo de acero radial • Específicamente diseñada para uso sobre y fuera de carretera CT719 7500 Northwest 35th Terrace Miami, FL 33122 U.S.A. Tel: +1 (305) 696-0096 Fax: +1 (305) 696-5926 cosmotires.com