Descargar - Den Braven
Transcripción
Descargar - Den Braven
Ficha Técnica Zwaluw® Winterfoam Straw polyurethane foam for applications in colder climates Descripción del Producto Zwaluw WINTERFOAM is a 1-component insulation and construction polyurethane foam developed to make a seal between construction parts. Zwaluw WINTERFOAM cures in response to humidity from air and from building materials. Ventajas exceeding 50°C. Do not pierce or burn, even after use. Contains flammable propellants. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition. No smoking. For more information see Technical Bulletins in the Knowledge Base on our website www.denbraven.com. Datos Técnicos • High quality professional PU Foam • Applicable in colder seasons Limitaciones • Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates Zwaluw WINTERFOAM can be used in joints around window frames and constructions themselves, partition walls, ceiling and floor joints, surface penetrations of pipes and tubes through walls and floors. In General PU-foam has an excellent adhesion on concrete, brick, stone, plaster, wood, metal and many plastics like EPS and XPS, rigid PU foam and uPVC. • Not suitable for continuous water load and for filling/injecting big, hollow spaces where insufficient moisture is available. Método de aplicación Capacidad de pintado Application temperature (applies to environment and substrates): -15°C* to +35°C (recommended +10°C till +25°C) When applying in cold conditions allow the canister to reach room temperature before use. Can be painted or covered with sealant/plaster when fully cured. Aplicaciones Keep the canister with the valve upwards and fix a applicator gun with NBS-thread onto the canister. We recommend a Zwaluw NBS Gold (see instructions in the gun box). Shake the canister vigorously prior to use at least 20 times. Turn canister upside down and apply the foam. To regulate the flow of the foam, loosen the valve at the back of the handle. Half fill the cavity and, in case of low humidity, lightly spray the foam with water. The foam will expand to fill the rest. When fixing window frames, use spacers and wedges to hold the frame in place for approximately 24 hours until the foam is fully cured. Protect eyes and wear gloves and working clothes. Floor-covering and furniture to be covered with paper or plastic foil. Joints wider and deeper than 4 cm should be filled in multiple layers. Waiting time between applications 15-30 minutes. Before each application lightly spray with water. Only use in well ventilated areas. Store canister upright between + 5°C and + 25°C. Pressurized container! Protect from sunlight and do not expose to temperatures Preparación de la superficie y acabado Substrates must be clean and free of dust, oil and grease. It is important to moisten substrates slightly before use as this improves adhesion and finished cell structure of the foam. Limpieza Fresh foam can be removed directly with Zwaluw Universal PU-Cleaner. After curing the surplus of the foam can be removed with a knife or spatula and the foam surface can be finished. Colores • Yellow Embalaje • Canister 750 ml Vida Útil y Condiciones de Almacenamiento In unopened original packaging between +5°C and +25°C, shelf life till 18 months after production date, stored in a dry place. Store the canisters in an upright position. Instrucciones de seguridad e higiene La ficha de Salud & Seguridad debe ser leída y entendida antes de utilizar el producto. Esta ficha se encuentra disponible a requerimiento a través de la página web de Den Braven. Den Braven España Av.Sur Aeropuerto de Barajas 16. Ed. 7, 4º D., Madrid T +34 910 835 014 | E [email protected] 2016-12-08 15:28:28 UTC Ficha Técnica Zwaluw® Winterfoam Straw polyurethane foam for applications in colder climates Garantía / Responsabilidad Den Braven garantiza que su producto cumple, dentro de su vida útil especificada con todas sus especificaciones. Renuncia Toda la información contenida en el presente documento y en todas nuestras publicaciones (incluyendo las disponibles vía electrónica) se basa en nuestro conocimiento actual y en nuestra propia experiencia y es propiedad intelectual exclusiva de Den Braven. Este documento no puede ser copiado, mostrado a terceros, reproducido, comunicado públicamente o utilizado en forma alguna sin un consentimiento por escrito de Den Braven. La información técnica contenida en este documento sirve como indicación y no es exhaustiva. Den Braven no será responsable por cualquier daño, ya sea directo o indirecto, provocados por errores editoriales, por documentos incompletos o incorrectos. Esto incluye pero no se limita a, errores o falta de exactitud dadas por cambios tecnológicos o cualquier estudio o investigación realizados desde la fecha de publicación de este documento y la fecha en la cual se adquiera el producto. Den Braven se reserva el derecho de enmendar el presente documento y otros documentos relacionados. Den Braven no será responsable por daños, ya sean directos o indirectos, si el producto no es utilizado en la forma indicada en este documento. El usuario debe leer y comprender la información de este documento y de cualquier otro relacionados al producto antes de la utilización del mismo. El usuario es responsable de realizar todas las pruebas requeridas para asegurarse de que el producto es el adecuado para el uso para el cual se adquirió. No poseemos influencia en la forma en que se aplique el producto o las circunstancias relacionadas con tal evento durante su almacenamiento o transporte y no aceptaremos ninguna responsabilidad legal por daño. Todas las entregas se realizan de acuerdo a nuestros términos y condiciones generales y han sido archivadas y registradas en la Cámara Holandesa de Comercio. Den Braven España Av.Sur Aeropuerto de Barajas 16. Ed. 7, 4º D., Madrid T +34 910 835 014 | E [email protected] 2016-12-08 15:28:28 UTC