Hinge Replacement for E-Series Inswing and
Transcripción
Hinge Replacement for E-Series Inswing and
Hinge Replacement for E-Series Inswing and Outswing Hinged French Patio Door Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com. Please leave this guide with building owner. Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite www.eaglewindow.com Deje esta guía con el dueño de la construcción. ▶▶ Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation. Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad. ▶▶ Check with your local building code official to identify and confirm compliance with local building code requirements. Consulte los códigos locales de construcción para identificar y confirmar que se cumplan los requisitos del código de construcción. Parts Included (1)Hinge Partes incluidas Tools Needed Herramientas necesarias ∙∙ Safety Glasses Lentes de seguridad ∙∙ Drill / Driver ∙∙ #2 Phillips Bit ∙∙ Caulk Gun Supplies Needed Herramientas necesarias ∙∙ Sealant Hinge Use caution when working at elevated heights and around unit openings. Follow manufacturers’ instructions for ladders and/ or scaffolding. Failure to do so may result in injury or death. Follow manufacturers’ instructions for hand or power tools. Always wear safety glasses. Failure to do so may result in injury and/or product damage. “Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2013 Andersen Corporation. All rights reserved. Follow instructions of foam, sealant and flashing manufacturer regarding safety, material application and compatibility with this product. 9 0 6 9 2 0 9 BA Revised 09/03/13 1 Interior 2 Remove only one hinge at a time. Removal of more than one hinge may result in personal injury, product, and/or property damage. Interior Door Frame Shim Door Panel Hinge Cups Remove hinge screws with a drill/driver and save for reuse. Remove old hinge and dispose of properly. Reapply hinge cup and shims in same locations if they become dislodged during hinge removal. Hold hinge cup and shims in place with a dab of sealant. 3 4 Interior Interior Four (4) #12 x 1 1/2" Wood Screws (panel) Door Panel Two (2) #10 x 2 1/2" Wood Screws (frame) Two (2) #10-25 x 5/8" Machine Screws Door Frame Position new hinge and fasten to door panel using four (4) #12 x 1 1/2" screws. Fasten hinge to frame using two (2) #10-24 x 5/8" machine screws through top and bottom holes and two #12 x 2 1/2" wood screws through center holes. ▶▶ Hinge replacement is complete. Hinge replacement is completed. 9069209 2