Tecmaco - Maquinaria sin limite

Transcripción

BOOM TRUCK
HYDRAULIC
Hydraulic motor
Control valves
Hydraulic pump
Reserve tank
For winch and swing
Multiple control valves with integral safety valve
3-section gear pump
Winch system : (20.6Mpa)
121L/min@ 2,430rpm pump
99.6L/min@ 2,000rpm pump
Boom and outriggers system : (21.1 MPa)
95 L/min@ 2,430rpm pump
Swing system : (12.1 MPa)
295 L capacity
*PTO/Mounting note included
ELECTRICAL SYSTEM
Power supply
DC12V with a converter (Step down converter from 24V)
SAFETY DEVICES
Pendant type over-winding cut out
Hook safety latch
Level gauge
Hydraulic safety valves, check valves and holding valves
Over load shutoff with load indicator (TADANO’s exlusive “AMA” system)
Load / Boom angle indication
Audible warning
External warning lamps
BOOM REST
Removable
TORSION BOX
<CAB BACK MOUNTED>
The weight of 22ft (6.7m) standard torsion box is approx. 1,800kg.
Introducing the TADANO TM-20110, the TADANO Straight Truck Mount is available in behind
the cab as well as rear mounts. TADANO has over 50 years of experience in manufacturing high
quality cranes featuring innovative ideas and leading edge technology. The TM-20110 answers
a real need for a true Boom Truck for all over the world. This is the crane that everyone has been
looking for and we have delivered a crane packed with great features and superior performance.
With its long reach and high lift, we believe the TM-20110 is one of our most desirable cranes.
TADANO builds a vast range of cranes from 0.5 ton to 600 tons. No matter what your reach or lift
requirements are, TADANO can provide you with a great solution. Put one to work for you now.
Call today or visit our web site for more information.
MAXIMUM LIFTING CAPACITY : 18TON
Features:
Exceptional Reach without a Jib: 33.5 m. Full Power Boom
Self-Aligning Pentagonal Shaped Boom: reducing maintenance cost
Light Weight: increases payload
Out & Down Mainframe Outriggers: complete level ability
Multiple Outrigger Span: easy to set up in various job sites
Faster Function Speeds: increase productivity
Superior Winch Performance: up to 85 m/min increase productivity
Shear Plate Mounting: more secure “no creep mount”
Large Hydraulic Reservoir: superior cooling capabilities
Operator Friendly: dual control stations with exceptional job site viewing
Complete Load Monitoring: TADANO’s exclusive “AMA” system
<REAR MOUNTED>
The weight of 14ft (3.6m) torsion box is approx. 1,400kg.
CRANE WEIGHT
Approx. 6,900 kg (bare), approx. 8,400kg (include all items; crane, tank, oil, rear stabilizer, boom rest, etc.)
OPTION
Hook block
Swivel hook with safety latch
1) 3,200kg capacity ( for single line use, 60kg)
2) 6,000kg capacity ( for two part lines use, 100kg)
3) 12,000kg capacity ( for four part lines line use, 160kg)
4) 18,000kg capacity ( for six part lines use, 220.5kg)
*Note
A crane does not come with a hook block as a standard item
and shall be ordered out from the above.
Highest Quality Boom Trucks on the Planet
Continuing technical development requires Tadano to retain the right to
make specifications, equipment and price changes without notice.
*Some specifications are subject to change
TADANO LTD. (International Division)
4-12, Kamezawa 2-chome, Sumida-ku Tokyo 130-0014, Japan
Phone: +81-3-3621-7750 Fax: +81-3-3621-7785
http://www.tadano.com E-mail: [email protected]
TM-20110
2014-05
Printed in Japan
TM-20110 (18 ton) crane configuration
WORKING RANGE
(m)
80˚
33.5
70˚
35
60˚
28.6
30
50˚
23.8
40˚
18.9
NOTE: Extended speed and elevation speed are calculated under the condition that the flow is 95 L/min
30˚
14.0
15
20˚
8.3
10
10˚
5
NOTE: Single line speed is calculated under the condition that the flow is 216 L/min
Wire rope
diameter x length
14 mm x 96 m
breaking strength
134 kN
SWING
Hydraulic motor driven, Planetary gear speed reduction
Continuous 360˚ full circle swing (Standard)
Swing speed
360˚ / 37s @ 2,430rpm pump or 45s @ 2,000rpm pump
Non-Continuous 375˚ rotation on ball bearing slew ring (Option)
Swing speed
OUTRIGGERS
<CAB BACK MOUNTED>
Outriggers (Out & Down type)
Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
Rear stabilizers (Out & Down type)
Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame
Extend width
Min. 2,250mm
Max.3,500mm
Single front stabilizer
Hydraulic extended jack in front of bumper for 360˚ lifting operations
<REAR MOUNTED>
Rear outriggers (Out & Down type)
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
Front outriggers (Out & Down type)
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
20
0˚
0
5
10
15
20
0
25
<CAB BACK MOUNTED>
(mm)
5,900 to 6,600
3,900kg MIN
4,300kg MIN
This mount requires front stabilizer, rear stabilizers, torsion
resisting box and additional counterweight in the underside of
the bed for full capacity 360˚ around the truck.
You must select a torsion box according to the length of the
flatbed and have it installed. The weight of standard torsion box
for 22' flat bed: approx. 1,814kg.The complete unit must be
istalled in accordance with factory requirements and a test
performed to determine actual stability and counterweight
requirements for variety of trucks.
CAB BACK MOUNTED product can not convert to REAR
MOUNTED configuration.
Gross Axle Weight Rating(GAWR),front
Gross Axle Weight Rating(GAWR),rear
Gross Vehicle Weight Rating
Wheelbase(WB)
Cab to axle
Stability weight, front
Stability weight, rear
Frame Section Modulus(SM)
under crane, front spring hunger of front
spring to rear spring hunger of rear spring
758 MPa steel
at the front stabilizer attachment point,
758 MPa steel
over rear stabilizers, 758 MPa steel
PTO torque
PTO revolution
Width for crane mounting
Frame width (outside)
Frame height (ground to frame top)
approx. 7,200 kg
approx. 15,400 kg
approx. 22,600 kg
5,900 to 6,600 mm
4,000 to 4,800 mm
3,900 kg Min (*)
4,300 kg Min (*)
328 cm3 Min. per rail
Approx. 390 N-m Min.
Approx. 550 to 2,400 min-1
Approx. 1,400 mm Min.
Approx. 915 mm Max.
Approx. 1,060 mm Max.
(Height of crane mounting base can be
changed by combination of jack floats
and crane bases)
* Estimated axle scale weights prior to installation of crane, stabilizers and torsion resisting
box for 78% stability. Include counterweight.
Working Radius (m)
The above lifting heights and boom angles are based on a straight (unladen)boom,
and allowance should be made for boom deflection obtained under laden condition.
RATED LIFTING CAPACITY (IN KILOGRAMS)
8.3m Boom
Load
radius
(m) Loaded
Boom
Angle
1.5
2.5
3.0
3.5
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
79˚
73˚
68˚
64˚
60˚
51˚
41˚
0˚
Outriggers
Extended
Max.
Mid.
18,000 12,700
11,300 11,300
9,900 9,900
8,800 8,800
7,900 7,800
6,400 5,400
5,200 3,750
2,900
1
No. of part lines
Max. of load
3,200kg
2,100
550
(7.88m)
0˚
4
12,000kg
6
18,000kg
<REAR MOUNTED>
(mm)
SAE85% / ISO4305
14m Boom
Loaded
Boom
Min. Angle
9,000
6,500
78˚
4,700
76˚
3,500
73˚
2,750
69˚
1,800
65˚
1,200
55˚
44˚
29˚
2
6,000kg
18.9m Boom
Outriggers
Loaded
Extended
Boom
Max.
Mid.
Min. Angle
7,200
7,200
7,200
6,200
5,100
3,700
2,600
1,800
7,200
7,200
7,200
5,400
3,800
2,200
1,450
900
1,000
650
(13.57m)
4,300
3,400
2,700
1,850
1,300
650
300
75˚
73˚
66˚
59˚
51˚
44˚
32˚
10˚
0˚
23.8m Boom
Outriggers
Loaded
Extended
Boom
Max. Mid. Angle
5,700
4,700
3,300
2,500
2,000
1,500
1,100
750
5,200
3,600
2,250
1,500
1,000
650
400
250
(18.44m)
77˚
72˚
67˚
61˚
56˚
50˚
41˚
35˚
21˚
28.6m Boom
33.5m Boom
Load
radius
Outriggers Loaded Outriggers Loaded Outriggers (m)
Extended
Boom Extended Boom Extended
Max. Mid. Angle
Max. Angle
Max.
1.5
2.5
3.0
3.5
4.0
5.0
4,300 3,800
6.0
2,400
3,200 2,250
77˚
8.0
1,700
2,300
2,400 1,500
75˚
72˚
10.0
1,500
1,900
2,000 1,050
71˚
67˚
12.0
1,300
1,600
1,600 700
69˚
64˚
14.0
1,100
1,300
1,250 450
65˚
58˚
16.0
900
1,000
950 250
60˚
52˚
18.0
750
750
700
56˚
48˚
20.0
600
550
500
52˚
42˚
22.0
400
400
47˚
35˚
24.0
250
42˚
26.0
5,590 to 6,350
*3,600kg MIN
*3,600kg MIN
This mount requires front outriggers, torsion resisting box and
additional counterweight in the underside of the bed for full
capacity 360˚ around the truck.
You must select a torsion box according to the length of the flatbed and
have it installed. The weight of standard torsion box for 14' flat bed:
approx. 1,406kg.
The complete unit must be istalled in accordance with factory
requirements and a test performed to determine actual stability and
counterweight
REAR MOUNTED configulation can not convert to CAB BACK
Gross Axle Weight Rating(GAWR), front
Gross Axle Weight Rating(GAWR), rear
Wheelbase(WB)
Cab to axle(CA)
Frame Section Module(SM) under crane,
110,000PSI steel
Frame Section Module(SM)
over rear outriggers, 110,000PSI steel
PTO torque
PTO revolution
Frame width(outside)
Frame height(ground to frame top)
Notice : The chart is only for reference and should not be used for operation.
Maintain a clearances at least 3m between any part of the crane, load line or load and any electrical line carrying up to 50,000 volts.
0.3m additional clearance is required for every additional 30,000 volts or less.
TM-20110 (18 ton) crane dimension specifications
Min 8,330 Max33,530
450
Extension Mark
Front Outriggers
Yellow: Extended Mid.
White: Extended Max.
Extended Min.
Extended Mid.
Extended Max.
(mm)
2,428
< REAR MOUNTED >
< CAB BACK MOUNTED >
Rear Stabilizers
Outriggers Max.
Outriggers Min.
Extension Mark for Rear Mout
Outriggers Max.
Rear Outriggers
Front Outriggers
Outriggers Mid.
Extended Min.
Extended Max.
Outriggers Min.
Outriggers Mid.
Extended Min.
Extended Mid.
Extended Max.
Extended Min.
Extended Mid.
Extended Max.
approx. 6,350kg
approx. 15,400kg
approx. 21,750kg
5,590 to 6,350mm
3,810 to 4,570mm
* 3,600kg Min.
* 3,600kg Min.
approx. 390 N-m Min.
approx. 550 to 2,400 rpm
approx. 1,400mm Min.
approx. 915mm Max.
approx. 1,060mm Max.
* Estimated axle scale weights prior to installation of crane, stabilisers and torsion box for 78%
stabilitiy. Include counterweight.
2,809
Boom point
2 sheaves
WINCH
Hydraulic motor driven, Planetary gear speed reduction, provided with automatic break
Single line pull
3,265 kg
4,400 kg (Winch capacity of permissible line pull at 1st layer)
Single line speed
85 m/min (@ 3rd layer) @ 2,430rpm pump or 70m/min @ 2,000rpm pump
25
NOTE:
1) Rated lifting capacities on this chart show maximum allowable loads with outriggers
properly extended on a firm surface and the crane leveled and mounted on a factory
recommended truck. The rated lifting capacities in shaded areas are based on crane
strength and others, on its stability.
2) The weight of handling devices such as hook block, slings, etc., must be considered part of
the load and must be deducted form the rated lifting capacities.
3) Weights of any accessories attached to the boom or loadline must be deducted from the
rated lifting capacities.
4) The operator must reduce loads to allow for such factors as wind, ground conditions, operating
speed and the effects of freely suspended loads such as boom deflection.
5) For full capacity 360°around the truck, the chassis requires the front stabilizer (ex rear
mounted) and additional counterweight in the underside of the bed.
6) For boom length or radius not shown use the rated lifting capacity of next longer boom
lengths or radius.
7) For boom length longer than 14 m, extend outriggers to the Max. or Mid. Extended.
8) For boom length longer than 23.8 m, extend outriggers to the Max. Extended.
9) Keep at least 3 wraps of load line on winch drum.
10) 14 m boom means 1st mark on 2nd boom section side plate is half visible.
11) 18.9 m boom means 2nd mark on 2nd boom section side plate is half visible.
12) 23.8 m boom means 3rd mark on 2nd boom section side plate is half visible.
13) 28.6 m boom means 4th mark on 2nd boom section side plate is half visible.
stroke
680
MAXIMUM LIFTING CAPACITY
18,000 kg @ 1.5m (6-part lines)
BOOM
5-sectioned, fully powered synchronized telescoing boom of pentagonal box construction
Retracted length
8.3 m
Extended length
33.5 m
Extended speed
25.2 m / 73s @ 2,430rpm pump or 89s @ 2,000rpm pump
Elevation
Elevated by double-acting hydraulic cylinder
Elevation speed
-5˚ to 80˚ / 23s @ 2,430rpm pump or 28s @ 2,000rpm pump
TM-20110 (18 ton) crane capacity
Lifting height (m)
TM-20110 (18 ton) crane specifications
Min 2,180
Mid 4,000
Max 5,700
BOOM TRUCK
HYDRAULIC
Hydraulic motor
Control valves
Hydraulic pump
Reserve tank
For winch and swing
3-section gear pump
295 L capacity
ELECTRICAL SYSTEM
Power supply
SAFETY DEVICES
Hook safety latch
Level gauge
Audible warning
BOOM REST
Removable
TORSION BOX
<CAB BACK MOUNTED>
Features:
<REAR MOUNTED>
CRANE WEIGHT
OPTION
Hook block
*Note
Phone: 81-3-3621-7750 Fax: 81-3-3621-7785
http://www.tadano-global.com E-mail: [email protected]
TM-20110
2014-05
Printed in Japan
WORKING RANGE
(m)
80˚
33.5
70˚
35
60˚
28.6
30
50˚
23.8
40˚
18.9
30˚
14.0
15
20˚
8.3
10
10˚
5
Wire rope
diameter x length
14 mm x 96 m
breaking strength
134 kN
SWING
Swing speed
Swing speed
OUTRIGGERS
<CAB BACK MOUNTED>
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
Extend width
Min. 2,250mm
Max.3,500mm
<REAR MOUNTED>
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
20
0˚
0
5
10
15
20
0
25
<CAB BACK MOUNTED>
(mm)
5,900 to 6,600
3,900kg MIN
4,300kg MIN
Wheelbase(WB)
Cab to axle
758 MPa steel
758 MPa steel
PTO torque
PTO revolution
approx. 7,200 kg
approx. 15,400 kg
approx. 22,600 kg
5,900 to 6,600 mm
4,000 to 4,800 mm
3,900 kg Min (*)
4,300 kg Min (*)
Approx. 915 mm Max.
and crane bases)
Working Radius (m)
8.3m Boom
Load
radius
(m) Loaded
Boom
Angle
1.5
2.5
3.0
3.5
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
79˚
73˚
68˚
64˚
60˚
51˚
41˚
0˚
Outriggers
Extended
Max.
Mid.
18,000 12,700
11,300 11,300
9,900 9,900
8,800 8,800
7,900 7,800
6,400 5,400
5,200 3,750
2,900
1
No. of part lines
Max. of load
3,200kg
2,100
550
(7.88m)
0˚
4
12,000kg
6
18,000kg
<REAR MOUNTED>
(mm)
SAE85% / ISO4305
14m Boom
Loaded
Boom
Min. Angle
9,000
6,500
78˚
4,700
76˚
3,500
73˚
2,750
69˚
1,800
65˚
1,200
55˚
44˚
29˚
2
6,000kg
18.9m Boom
Outriggers
Loaded
Extended
Boom
Max.
Mid.
Min. Angle
7,200
7,200
7,200
6,200
5,100
3,700
2,600
1,800
7,200
7,200
7,200
5,400
3,800
2,200
1,450
900
1,000
650
(13.57m)
4,300
3,400
2,700
1,850
1,300
650
300
75˚
73˚
66˚
59˚
51˚
44˚
32˚
10˚
0˚
23.8m Boom
Outriggers
Loaded
Extended
Boom
Max. Mid. Angle
5,700
4,700
3,300
2,500
2,000
1,500
1,100
750
5,200
3,600
2,250
1,500
1,000
650
400
250
(18.44m)
77˚
72˚
67˚
61˚
56˚
50˚
41˚
35˚
21˚
28.6m Boom
33.5m Boom
Load
radius
Extended
Max. Mid. Angle
Max. Angle
Max.
1.5
2.5
3.0
3.5
4.0
5.0
4,300 3,800
6.0
2,400
3,200 2,250
77˚
8.0
1,700
2,300
2,400 1,500
75˚
72˚
10.0
1,500
1,900
2,000 1,050
71˚
67˚
12.0
1,300
1,600
1,600 700
69˚
64˚
14.0
1,100
1,300
1,250 450
65˚
58˚
16.0
900
1,000
950 250
60˚
52˚
18.0
750
750
700
56˚
48˚
20.0
600
550
500
52˚
42˚
22.0
400
400
47˚
35˚
24.0
250
42˚
26.0
5,590 to 6,350
*3,600kg MIN
*3,600kg MIN
approx. 1,406kg.
counterweight
Wheelbase(WB)
Cab to axle(CA)
110,000PSI steel
PTO torque
PTO revolution
Min 8,330 Max33,530
450
Extension Mark
Front Outriggers
Extended Min.
Extended Mid.
Extended Max.
(mm)
2,428
< REAR MOUNTED >
Rear Stabilizers
Outriggers Max.
Outriggers Min.
Outriggers Max.
Rear Outriggers
Front Outriggers
Outriggers Mid.
Extended Min.
Extended Max.
Outriggers Min.
Outriggers Mid.
Extended Min.
Extended Mid.
Extended Max.
Extended Min.
Extended Mid.
Extended Max.
approx. 6,350kg
approx. 15,400kg
approx. 21,750kg
5,590 to 6,350mm
3,810 to 4,570mm
* 3,600kg Min.
* 3,600kg Min.
approx. 915mm Max.
2,809
Boom point
2 sheaves
WINCH
Single line pull
3,265 kg
Single line speed
25
NOTE:
lengths or radius.
stroke
680
18,000 kg @ 1.5m (6-part lines)
BOOM
Retracted length
8.3 m
Extended length
33.5 m
Extended speed
Elevation
Elevation speed
Lifting height (m)
Min 2,180
Mid 4,000
Max 5,700
WORKING RANGE
(m)
80˚
33.5
70˚
35
60˚
28.6
30
50˚
23.8
40˚
18.9
30˚
14.0
15
20˚
8.3
10
10˚
5
Wire rope
diameter x length
14 mm x 96 m
breaking strength
134 kN
SWING
Swing speed
Swing speed
OUTRIGGERS
<CAB BACK MOUNTED>
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
Extend width
Min. 2,250mm
Max.3,500mm
<REAR MOUNTED>
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
Extend width
Min. 2,180mm
Mid. 4,000mm
Max.5,700mm
20
0˚
0
5
10
15
20
0
25
<CAB BACK MOUNTED>
(mm)
5,900 to 6,600
3,900kg MIN
4,300kg MIN
Wheelbase(WB)
Cab to axle
758 MPa steel
758 MPa steel
PTO torque
PTO revolution
approx. 7,200 kg
approx. 15,400 kg
approx. 22,600 kg
5,900 to 6,600 mm
4,000 to 4,800 mm
3,900 kg Min (*)
4,300 kg Min (*)
Approx. 915 mm Max.
and crane bases)
Working Radius (m)
8.3m Boom
Load
radius
(m) Loaded
Boom
Angle
1.5
2.5
3.0
3.5
4.0
5.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
79˚
73˚
68˚
64˚
60˚
51˚
41˚
0˚
Outriggers
Extended
Max.
Mid.
18,000 12,700
11,300 11,300
9,900 9,900
8,800 8,800
7,900 7,800
6,400 5,400
5,200 3,750
2,900
1
No. of part lines
Max. of load
3,200kg
2,100
550
(7.88m)
0˚
4
12,000kg
6
18,000kg
<REAR MOUNTED>
(mm)
SAE85% / ISO4305
14m Boom
Loaded
Boom
Min. Angle
9,000
6,500
78˚
4,700
76˚
3,500
73˚
2,750
69˚
1,800
65˚
1,200
55˚
44˚
29˚
2
6,000kg
18.9m Boom
Outriggers
Loaded
Extended
Boom
Max.
Mid.
Min. Angle
7,200
7,200
7,200
6,200
5,100
3,700
2,600
1,800
7,200
7,200
7,200
5,400
3,800
2,200
1,450
900
1,000
650
(13.57m)
4,300
3,400
2,700
1,850
1,300
650
300
75˚
73˚
66˚
59˚
51˚
44˚
32˚
10˚
0˚
23.8m Boom
Outriggers
Loaded
Extended
Boom
Max. Mid. Angle
5,700
4,700
3,300
2,500
2,000
1,500
1,100
750
5,200
3,600
2,250
1,500
1,000
650
400
250
(18.44m)
77˚
72˚
67˚
61˚
56˚
50˚
41˚
35˚
21˚
28.6m Boom
33.5m Boom
Load
radius
Extended
Max. Mid. Angle
Max. Angle
Max.
1.5
2.5
3.0
3.5
4.0
5.0
4,300 3,800
6.0
2,400
3,200 2,250
77˚
8.0
1,700
2,300
2,400 1,500
75˚
72˚
10.0
1,500
1,900
2,000 1,050
71˚
67˚
12.0
1,300
1,600
1,600 700
69˚
64˚
14.0
1,100
1,300
1,250 450
65˚
58˚
16.0
900
1,000
950 250
60˚
52˚
18.0
750
750
700
56˚
48˚
20.0
600
550
500
52˚
42˚
22.0
400
400
47˚
35˚
24.0
250
42˚
26.0
5,590 to 6,350
*3,600kg MIN
*3,600kg MIN
approx. 1,406kg.
counterweight
Wheelbase(WB)
Cab to axle(CA)
110,000PSI steel
PTO torque
PTO revolution
Min 8,330 Max33,530
450
Extension Mark
Front Outriggers
Extended Min.
Extended Mid.
Extended Max.
(mm)
2,428
< REAR MOUNTED >
Rear Stabilizers
Outriggers Max.
Outriggers Min.
Outriggers Max.
Rear Outriggers
Front Outriggers
Outriggers Mid.
Extended Min.
Extended Max.
Outriggers Min.
Outriggers Mid.
Extended Min.
Extended Mid.
Extended Max.
Extended Min.
Extended Mid.
Extended Max.
approx. 6,350kg
approx. 15,400kg
approx. 21,750kg
5,590 to 6,350mm
3,810 to 4,570mm
* 3,600kg Min.
* 3,600kg Min.
approx. 915mm Max.
2,809
Boom point
2 sheaves
WINCH
Single line pull
3,265 kg
Single line speed
25
NOTE:
lengths or radius.
stroke
680
18,000 kg @ 1.5m (6-part lines)
BOOM
Retracted length
8.3 m
Extended length
33.5 m
Extended speed
Elevation
Elevation speed
Lifting height (m)
Min 2,180
Mid 4,000
Max 5,700
BOOM TRUCK
HYDRAULIC
Hydraulic motor
Control valves
Hydraulic pump
Reserve tank
For winch and swing
3-section gear pump
295 L capacity
ELECTRICAL SYSTEM
Power supply
SAFETY DEVICES
Hook safety latch
Level gauge
Audible warning
BOOM REST
Removable
TORSION BOX
<CAB BACK MOUNTED>
Features:
<REAR MOUNTED>
CRANE WEIGHT
OPTION
Hook block
*Note
Phone: +81-3-3621-7750 Fax: +81-3-3621-7785
http://www.tadano.com E-mail: [email protected]
TM-20110
2014-05
Printed in Japan

Tecmaco - Maquinaria sin limite

Transcripción

Documentos relacionados

GHC130 Product Flyer — PDF

amano msm - Amano McGann

Manual de Usuario. Barreras Vehiculares.

ul 1598 electrical instructions for flushmounts, wall sconces