BPA-MP - amutec
Transcripción
BPA-MP Saldatrice automatica (brevettata) ad alta velocità (200 cicli/min ) per la produzione di sacchetti di piccole / medie dimensioni con saldatura di fondo, partendo da bobine di grande formato divisibili in varie piste (fino a 8) con l’ausilio di lame taglia/salda, sincronizzazione e controllo tensione tramite servomotori “Brush-less” gestiti da software dedicato, controllo delle funzioni da pannello operatore “touchscreen”, gruppo portabobina con sollevamento idraulico per la presa a terra delle bobine, anche senza albero interno (versione shaft-less). Impilamento dei sacchi, con sistema a doppio pressino senza aghi, tavolo di raccolta a pinze e tappeto d’accumulo ad avanzamento programmabile. High speed (200 cycles / min) automatic bag maker (patented) for the production of small/medium size bottom sealed bags, starting from wide size rolls divided in several tracks (until 8) by the use of slit/seal units, synchronisation and tension control by means of servo drive “Brush-Less” motors managed by a dedicated software, functional parameters entered and checked by a “touch screen” panel, hydraulic lifting reel stand to collect the rolls from the floor also without internal shaft (shaftless version), staking of bags by a double clamping system without needles, collecting gripper table and programmable indexing conveyor belt. Soudeuse automatique (breveté) de haute vitesse (200 cycles/min.) pour la production de petit/moyenne sachets en reprise, avec soudure de fond en partant de bobines de grand format divisé en plusieurs pistes (jusque 8) par moyen des lames de coupe/soudure, synchronisation et control de tension par moyenne de moteurs « brush-less » exploités par software dédié, contrôle des fonctionnes par panneau opérateur « Touch-screen », soulèvement hydraulique des bobines (prise au sol), même en version sans arbre «Shaft-less ». Empilement des sacs avec système à double presseur, sans aguilles, table de ramassage a pinces et tapis d’accumulation avec avancement réglable. Soldadora automática (patentada) de alta velocidad (200 ciclos/min) para la fabricación de bolsas de pequeño/medio formato en soldadura de fondo, partiendo de bobina de gran formato divisible en varias pistas (hasta 8) con la ayuda de cuchillas de soldadura longitudinal, sincronización y control de tensión mediante servomotores “Brush-less” gestionados por software dedicado, control de las funciones a través de pantalla táctil “touch-screen”, grupo porta-bobinas con elevación hidráulica para la carga de bobinas desde el suelo, también sin eje interno (versión shaft-less). Apilado de las bolsas con sistema a doble presor sin agujas, mesa de recogida a pinzas y cinta transportadora de acumulación con avancxe programable. Via Donzelli da Poneta, 22 – 50020 - Ferrone –Greve in Chianti (FIRENZE) ITALY - Tel 055.85.05.95 – Fax 055.85.04.37 www.amutecsrl.com - [email protected] SIZE SIZE SIZE 1140 1340 1640 200 200 185 5 6 8 160 160 160 SPESSORE MINIMO Mics. MINIMUM THICKNESS Mics. 6x2 6x2 6x2 SPESSORE MASSIMO Mics. MAXIMUM THIKNESS Mics. 100x4 100x4 100x4 MASSIMA LUNGHEZZA SACCO mm. MAXIMUM BAG LEGHT mm. 2000 2000 2000 CARATTERISTICHE TECNICHE TECHNICAL SPECIFICATION CICLI MINUTO CYCLES MINUTE NUMERO MASSIMO PISTE MAXIMUM TRACKS NUMBER MASSIMA VELOCITA’ LINEARE Mt/min MAXIMUM LINEAR SPEED Mt/min SI ESEGUONO INOLTRE FORMATI DIVERSI SU RICHIESTA. – DIFFERENT SIZES EXECUTED UNDER REQUEST Via Donzelli da Poneta, 22 – 50020 - Ferrone –Greve in Chianti (FIRENZE) ITALY - Tel 055.85.05.95 – Fax 055.85.04.37 www.amutecsrl.com - [email protected]
Documentos relacionados
TSA-MS - amutec
multi-tracks sealed and perforated bags, flat, gusseted or round bottom “star bag” type, starting from wide size mother rolls, divided in several tracks by means of slit/sealing units.
Más detallesSaldatrice automatica (brevettata) per la produzione di tutti
production of bottom sealed bags, synchronisation and tension control by means of servo drive “Brush-Less” motors managed by a dedicated software, functional parameters entered and checked by a “to...
Más detallestsa-d-roller
Via Donzelli da Poneta, 22 – 50020 - Ferrone –Greve in Chianti (FIRENZE) ITALY - Tel 055.85.05.95 – Fax 055.85.04.37 www.amutecsrl.com - [email protected]
Más detallesAmutec SO-GO
mediante dos rodillos de caucho cuya composición está particularmente estudiada para evitar el desgaste en la zona de gofrado.
Más detalles