DFX TITANIUM SERIES
Transcripción
DFX TITANIUM SERIES
DFX TITANIUM SERIES DTV TRANSMITTER Supporting DVB-T MFN & SFN architectures Compact design High energy efficiency to minimize consumption and OPEX High redundancy to ensure maximum reliability Natural convection or forced air cooling A.G.C. and A.L.C. circuits Remote control interface Optional: Transposer configuration Dual Driver configuration Dual Cast configuration GPS receiver for SFN synchronization 1Hz step local oscillator The new DVB-T DFX TITANIUM series is a broadcast digital transmitter supporting MFN and SFN architectures. This series is designed as high performance-compact system suitable for low and medium powers, available from 2.5W to 700W. It includes: DVB-T exciter DX UM series, an eventual power amplifier DF series, an output filter compliant with the emission mask specification required and 19” standard rack cabinet. The exciter, built in 3HE cabinet, integrates the COFDM modulator which could be easily set by front panel or by USB port. High efficiency amplifier, based on latest LD-MOS technology, offers great linearity and excellent performances, also thanks to switching power supplies. Every device is equipped with a LCD meter display to control all operating parameters and remote control interface. The modular construction of the equipment makes this transmitter family very reliable and facilitates support and control procedures. It can be friendly configured as Dual Driver or Dual Cast transmitter. Architetture DVB-T MFN e SFN supportate Design compatto Alta efficienza energetica per minimizzare consumi e OPEX Alta ridondanza per assicurare massima affidabilità Raffreddamento ad aria forzata o convezione naturale Circuiti A.G.C. e A.L.C. Interfaccia controllo remoto Opzioni: Configurazione ripetitore Configurazione doppio driver Configurazione dual cast Ricevitore GPS per sincronizzazione reti SFN Oscillatore locale passo 1Hz Suporto redes digitales DVB-T MFN y SFN Diseño compacto Elevado rendimiento que minimiza el consumo energético y OPEX Alta redundancia que garantiza la máxima fiabilidad Refrigeraciòn por convecciòn natural o aire forzado Circuitos A.G.C. y A.L.C. Interfaz para control remoto Opciònes: Configuraciòn reemisor Configuraciòn doble excitador Configuraciòn dual cast Receptor GPS para redes SFN Oscilador local paso 1Hz La nuova serie DFX TITANIUM è un sistema di trasmissione professionale che supporta le architetture DVB-T MFN e SFN, sviluppata per soluzioni compatte ad alte prestazioni, per apparati di piccola e media potenza. Sono disponibili con potenze di uscita da 2.5W a 700W. La configurazione include: exciter DVB-T serie DX UM, eventuale amplificatore di potenza serie DF, filtro di uscita e rack standard 19”. L’exciter, allocato in un cabinet 3HE, integra il modulatore COFDM che può essere facilmente settato tramite pannello frontale o porta USB. Gli amplificatori ad alta efficienza, basati su transistor LDMOS di ultima generazione, offrono un’elevata affidabilità e prestazioni superiori, grazie anche agli alimentatori “switching” ad alto rendimento. Ciascun dispositivo è provvisto di interfaccia per il controllo remoto e di un’unità display multifunzione per il monitoraggio di tutti i parametri di funzionamento. La costruzione modulare facilita le operazioni di controllo e manutenzione. La versatilità della struttura permette di configurare agevolmente il trasmettitore in dual cast o dual driver. La nueva serie de transmisores digitales DFX TITANIUM està proyectada como un sistema compacto de alta calidad disponible para baja y mediana potencia de salida de 2.5W a 700W. Los transmisores TITANIUM están preparados para trabajar en redes digitales MFN y SFN e incorporan las últimas y más novedosas tecnologías, ofreciendo una inmejorable relación prestaciones - coste (CAPEX / OPEX). El transmisor incluye: el excitador DVB-T serie DX UM, eventual amplificador de potencia serie DF, filtro de salida y 19" estàndar cabinet. El excitador digital, alojado en un bastidor de 3HE, integra el modulador COFDM que puede ser seleccionado tramite el panel frontal o a travès de la puerta USB. Los amplificadores estàn basados en transistores LD-MOS de ùltima tecnologìa de alta densidad de potencia que proporcionan un elevado rendimiento energético garantizando la màxima calidad y fiabilidad. Todos los amplificadores estàn provistos de fuente de alimentaciòn tipo « switching » de alta eficiencia. Una pantalla LCD permite monitorear los paràmetros de funcionamiento. El aparado està equipado tambièn con interfaz para control remoto. El diseño compacto y modular y su elevada eficiencia energética facilitan las operaciones de control y mantenimiento. Su versatilidad permite configurar con facilidad el sistema en transmisor dual cast y/o doble excitador. DFX TRANSMITTER TITANIUM SERIES (specifications subject to change without any notice) ORDERING INFORMATION SIGNAL INPUTS Multiplexed Transport Stream 188/204 bytes – ASI, BNC female, MODEL 75 Ohm Frequency reference Time reference CODE 10 MHz OUTPUT POWER (BEFORE FILTER) OUTPUT CONN. POWER CONSUMPTION OPERATING BAND DIMENSION Level 0.1 – 3.3 Vpp DFX-2/U -UM 2.5 W N 35 W UHF 12HE Connector: BNC female, DFX-5/U -UM 5W N 80 W UHF 12HE 50 Ohm (on rear panel) DFX-10/U -UM 10 W N 130 W UHF 12HE DFX-40/U -UM 50 W N 350 W UHF 12HE (selectable) DFX-100/U -UM 130 W N 900 W UHF 21HE Connector: SMA male, DFX-200/U -UM 250 W DIN 7-16 1.7 KW UHF 21HE DFX-400/U -UM 500 W DIN 7-16 3.1 KW UHF 21HE DFX-2/3 -UM 2.5 W N 35 W VHF bIII 12HE DFX-10/3 -UM 10 W N 95 W VHF bIII 12HE 1 PPS, TTL level Trigger: falling or rising edge 50 Ohm (on front panel) DVB-T SPECIFICATIONS Standard ETSI EN 300 744 Network mode supported MFN & SFN (selectable) Modulation COFDM TS Input Data Rate Up to 31.67 Mbit/s DFX-50/3 -UM 50 W N 400 W VHF bIII 12HE Carrier number 2K, 4K, 8K DFX-100/3 -UM 180 W N 800 W VHF bIII 21HE Channel bandwidth 6 MHz, 7 MHz, 8 MHz DFX-300/3 -UM 350 W DIN 7-16 1.5 KW VHF bIII 21HE Code rate FEC = 1/2, 2/3, 3/4, 5/6, 7/8 Guard interval 1/4, 1/8, 1/16, 1/32 DFX-600/3 -UM 700 W DIN 7-16 3 KW VHF bIII 21HE Constellation QPSK, 16QAM, 64QAM Hierarchical Alpha = 1, 2, 4 for 16-QAM and DFX-2/1 -UM 2.5 W N 45 W VHF bI 12HE 10 W N 95 W VHF bI 12HE 64-QAM DFX-10/1 -UM Spectrum polarity Inverted or non-inverted DFX-50/1 -UM 50 W N 400 W VHF bI 21HE Configuration Real time through USB port DFX-100/1 -UM 100 W DIN 7-16 1 KW VHF bI 21HE DFX-200/1 -UM 200 W DIN 7-16 1. 9 KW VHF bI 21HE IF OUTPUT Connector 2 x SMB male, 50 Ohm Center frequency adjustable 35 to 46 MHz with 0.1 Hz step Spectrum polarity Inverted or non-inverted Level -20 dBm to 0 dBm adjustable Return loss > 26 dB ≤ -55 dBc Shoulder level Harmonics and spurious MER < 60 dB ≥ 49 dB (typical) RF OUTPUT Frequency range UHF 470 – 860 MHz Frequency range VHF bIII 170 – 240 MHz Frequency range VHF bI 47 – 85 MHz Frequency stability +/- 1 ppm or synchronized with external 10 MHz MER > 34 dB (typical) Spurious emission outside channel < -60 dB (with output filter) Shoulders level < -38 dB (with output filter) CONTROL INTERFACES Front panel LCD display and function keys USB Type B connector RS-232 serial port Connector: 9-pin SUB female Communication protocol USB: 115200 bps – 8 data bit 1 stop bit – no parity – no flow ctrl RS-232: 2400 bps – 8 data bit – 1 stop bit – no parity – no flow ctrl GENERAL Main AC input voltage 230 VAC (110 VAC as optional) Operating temperature range -5 °C to 45 °C Relative Humidity 95 % non condensing Cooling Natural convection or forced air Via dell’Industria, 20 – 25032 Chiari (Bs) ITALY – Tel +39 030 711643 – Fax +39 030 7000634 [email protected] – www.linearsrl.it
Documentos relacionados
DFX GOLD SERIES
High energy efficiency to minimize consumption and OPEX High redundancy to ensure maximum reliability Natural convection or forced air cooling A.G.C. and A.L.C. circuits Remote control interface Op...
Más detalles