DFX GOLD SERIES
Transcripción
DFX GOLD SERIES
DFX GOLD SERIES DTV TRANSMITTER DVB-T and ATSC standards available Compact design High energy efficiency to minimize consumption and OPEX High redundancy to ensure maximum reliability Natural convection or forced air cooling A.G.C. and A.L.C. circuits Remote control interface Optional: Transposer configuration Dual driver configuration Dual cast configuration N+1 configuration 1Hz step local oscillator GPS receiver module SNMP The digital DFX GOLD series consists of a professional DVB-T or ATSC transmitter suitable for low and medium powers, supporting MFN architecture. This series is designed as an easy, flexible and compact system. It includes: DVB-T or ATSC exciter, an eventual power amplifier and an output filter to comply with the emission mask specification required. The device could be contained in 12HE or 21HE cabinets. Transmitters output power is available from 2.5W to 500/900W. The modular construction of the equipment makes this transmitter family very reliable and facilitate maintenance and control procedures. The exciter, built in 3HE cabinet, consists of plug-in modules and integrates the digital modulator as well as the up-converter section. All DVB-T modulator operating parameters including modulation type, FEC, guard interval, carriers number and bandwidth can be easily set on the front panel. The plug-in structure makes easy to obtain any configuration desired and also makes possible to insert other optional modules (like ATV modulator and “timer” module, easily transforming the digital driver in a dual cast one). High efficiency amplifier, based on latest LD-MOS technology, offers great linearity and excellent performances. Each amplifier integrates modular switching power supplies and the following protections: SWR, over-temperature, over-drive, over-current and over-voltage. Each device is equipped with a LCD meter display to control all operating parameters and a remote control interface. Disponibile per gli standard DVB-T e ATSC Design compatto Alta efficienza energetica per minimizzare consumi e OPEX Alta ridondanza per assicurare massima affidabilità Raffreddamento ad aria forzata o convezione naturale Circuiti A.G.C. e A.L.C. Interfaccia controllo remoto Opzioni: Configurazione ripetitore Configurazione “doppio” driver Configurazione dual cast Configurazione N+1 Oscillatore locale passo 1Hz Modulo ricevitore GPS SNMP I sistemi della serie DFX GOLD sono trasmettitori professionali di bassa e media potenza adatti per la trasmissione di segnali digitali DVB-T e ATSC in reti MFN. Il sistema DFX GOLD è composto da: exciter DVB-T o ATSC, eventuale amplificatore di potenza, filtro d’uscita ed un rack da 12HE o 21HE. Per tutte le bande di frequenza sono disponibili potenze di uscita da 2.5W a 500/900W. L’exciter, allocato in un rack 3HE e composto da moduli plug-in, comprende il modulatore digitale e la parte di conversione. Tutti i parametri di funzionamento del modulatore DTV possono essere settati sul pannello frontale. Il design compatto e la versatilità della struttura facilitano le operazioni di controllo e manutenzione e permettono di modificare la configurazione del sistema. Gli amplificatori sono realizzati con le più avanzate tecnologie LD-MOS, garantendo un’elevata affidabilità e prestazioni superiori. Ogni amplificatore include alimentatori “switching” ad alto rendimento e le seguenti protezioni: SWR, alta temperatura, sovra-corrente, sovra-pilotaggio e sovra-tensione. Ciascun sistema integra un display multifunzionale per la visualizzazione di tutti i parametri e l’interfaccia per il controllo remoto. Disponible en los estàndares de TV digital DVB-T y ATSC Arquitectura compacta y flexibile Elevado rendimiento que minimiza el consumo energético y el coste de mantenimiento Alto rendimiento y fiabilidad Refrigeración por aire forzado o convecciòn natural Circuitos A.G.C y A.L.C. Interfaz para control remoto Opciònes: Configuraciòn reemisor Oscilador local paso 1Hz Configuraciòn doble excitador Configuraciòn dual cast Configuraciòn N+1 Mòdulo receptor GPS SNMP Los equipos digitales de la serie GOLD son transmisores profesionales de baja y mediana potencia para redes MFN. Estàn disponibles en los estàndares DVB-T o ATSC. Presentan un diseño completamente modular y reducido tamaño extremadamente compacto y flexible. Están dotados de excitadores en modulaciòn DVB-T o ATSC, eventual amplificador de potencia y filtro de salida. Se albergan en rack de 12HE o 21HE. Proporcionan potencias de salida de 2.5W a 500/900W, asegurando la máxima calidad y fiabilidad. La construcción modular permite obtener dimensiones pequeñas y rendimiento muy alto. El mantenimiento, así como las operaciones de control, son simples y fáciles de ejecutar. El excitador, alojado en un bastidor de 3HE, està formado por mòdulos de enchufle y contiene tanto el modulador digital como la secciòn del convertidor. Desde el panel frontal es posible ajustar todos paràmetros de funcionamiento del modulador. La construcciòn en mòdulos de enchufle, con alto grado de integraciòn, permite de alojar otros mòdulos transformando el sistema en cualquier configuraciòn (por ejemplo dual cast, añadiendo el modulador ATV y el mòdulo timer) en un solo contenedor. Los amplificadores de potencia, basados en transistores LD-MOS de alta densidad de potencia y elevada linealidad, garantizan calidad, prestaciones y fiabilidad. Los amplificadores integran las fuentes de alimentaciòn tipo « switching » de elevada eficiencia y las siguientes protecciones : SWR, sobrevoltage, alta temperatura, alta corriente y sobre-excitaciòn (over-drive). La pràctica pantalla LCD permite observar todos los paràmetros de funcionamiento. Todos los aparados engloban interfaz para control remoto. DFX TRANSMITTER GOLD SERIES (specifications subject to change without any notice) ORDERING INFORMATION DVB-T SPECIFICATIONS MODEL Standard ETSI EN 300 744 MPEG-TS Input 188/204 bytes – ASI BNC female, DFX-2/U 75 Ohm DFX-5/U Modulation COFDM TS Input Data Rate Carrier number OUTPUT POWER (BEFORE FILTER) OUT CONN POWER CONSUMPTION DVB-T ATSC BAND DIM. 40W UHF 12HE 90W UHF 12HE 130W 140W UHF 12HE N 350W 450W UHF 12HE N 900W 1.1KW UHF 21HE 1.7KW 1.8KW UHF 21HE 3.1KW 3.6KW UHF 21HE DVB-T ATSC -G 2.5W 4W N 35W -G 5W 8W N 80W DFX-10/U -G 10W 16W N Up to 31.67 Mbit/s DFX-40/U -G 50W 80W 2K, 8K DFX-100/U -G 130W 200W Bandwidth 6, 7, 8 MHz Code rate FEC = 1/2, 2/3, 3/4, 5/6, 7/8 Guard interval 1/32, 1/16, 1/8, 1/4 Constellation Network mode Spectrum polarity PCR Restamper CODE DIN 7-16 DIN 7-16 DFX-200/U -G 250W 400W DFX-400/U -G 500W 750W QPSK, 16QAM, 64QAM DFX-2/3 -G 2.5W 4W N 35W 40W bIII 12HE MFN DFX-10/3 -G 10W 16W N 95W 100W bIII 12HE Inverted or non-inverted DFX-50/3 -G 50W 80W N 400W 500W bIII 12HE For timing reconstruction DFX-100/3 -G 180W 230W N 800W 1KW bIII 21HE 1.5KW 1.8KW bIII 21HE 3KW 3.6KW bIII 21HE ATSC SPECIFICATIONS Standard A/53 MPEG-TS Input 188 bytes – ASI BNC female, DFX-300/3 -G 350W 450W DFX-600/3 -G 700W 900W DIN 7-16 DIN 7-16 75 Ohm DFX-2/1 -G 2.5W 4W N 45W 45W bI 12HE Modulation 8VSB DFX-10/1 -G 10W 16W N 95W 105W bI 12HE TS Input Data Rate 19.392 Mbit/s DFX-50/1 -G 50W 75W N 400W 500W bI 12HE 1KW 1.2KW bI 21HE 1.9KW 2.3KW bI 21HE Spectrum polarity Inverted or non-inverted Bandwidth 6 MHz Network Mode MFN DFX-100/1 -G 100W 150W DFX-200/1 -G 200W 300W DIN 7-16 DIN 7-16 Details are referred to DVB-T standard. For other digital standards, add to the model: /A ATSC RF OUTPUT Frequency range UHF 470 – 860 MHz Frequency range VHF bIII 170 – 240 MHz Frequency range VHF bI 47 – 85 MHz Frequency stability +/- 1 ppm or synchronized with external 10 MHz signal Amplitude imbalance <1% Quadrature error < 1 degrees MER > 34 dB (typical) Adjacent intermodulation < -60 dB (with output filter) Shoulder level < -38 dB (with output filter) GENERAL Main AC input voltage 230 VAC (110 VAC optional) Operating temp. range -5 °C to 45 °C Relative Humidity 95 % non condensing Cooling Natural convection and forced air Via dell’Industria, 20 – 25032 Chiari (Bs) ITALY – Tel +39 030 711643 – Fax +39 030 7000634 [email protected] – www.linearsrl.it
Documentos relacionados
DFX TITANIUM SERIES
modulator which could be easily set by front panel or by USB port. High efficiency amplifier, based on latest LD-MOS technology, offers great linearity and excellent performances, also thanks to sw...
Más detalles