alpha range 300-700 w
Transcripción
alpha range 300-700 w
ALPHA RANGE 300-700 W F21172 F21177 FOAM SHELL Il foam shell cod. F21172, F21177 è disponibile per tutti i modelli Alpha 300-700 W. È un accessorio prezioso, che avvolge e protegge il prodotto negli spostamenti da un set all’altro. F21172: Alpha BEAM 300 Alpha SPOT 300 Alpha WASH 300 Alpha SPOT HPE 300 Alpha BEAM 700 Alpha WASH 700 Alpha SPOT HPE 700 F21177: Alpha PROFILE 700 Peso: 6,8 Kg 510 mm (20.08”) 535 mm (21.06”) REALIZZAZIONE DEL FLIGHT CASE: MISURE INTERNE Altezza totale con proiettore inserito Cod. XXXXXX 120 mm (4.72”) NOTA: Al fine di bloccare in sicurezza il proiettore all’interno del flight case durante il trasporto, si deve fissare sulla parete interna del coperchio uno spessore, da far realizzare al fornitore di flight case. Tale spessore dovrà essere realizzato in poliuretano espanso o materiale similare, di densità 30 kg/m3, larghezza 120mm (4,72"), altezza dipendente dal modello di flight case e comunque sufficiente per bloccare il prodotto. Rev. 1 12/10 Il foam shell va inserito all’interno di un flight case, che l’utente dovrà acquistare o far realizzare da una ditta specializzata. www.gfstudio.com 535 mm (21.06”) CLAY PAKY SPA - Via Pastrengo, 3/b - 24068 Seriate (BG) - Italy Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it ALPHA RANGE 300-700 W F21172 F21177 FOAM SHELL The foam shell code F21172, F21177 is available for all 300-700 W Alpha models. It is a valuable accessory that wraps and protects the product during transport. F21172: Alpha BEAM 300 Alpha SPOT 300 Alpha WASH 300 Alpha SPOT HPE 300 Alpha BEAM 700 Alpha WASH 700 Alpha SPOT HPE 700 F21177: Alpha PROFILE 700 Weight: 6.8 Kg (14 lbs 15 ozs) 510 mm (20.08”) 535 mm (21.06”) FLIGHT CASE SPECIFICATION: INSIDE MEASUREMENTS Total height with the projector inside Cod. XXXXXX 120 mm (4.72”) N.B.: To secure the projector safely inside the flight case during transport, a spacer must be fixed to the inner surface of the cover. It should be made by the supplier of the flight case. This spacer should be made of expanded polyurethane or a similar material, with a density of 30 kg/m3 and width of 120mm; the height depends on the flight case model but, in any case, must be sufficient to secure the product. Rev. 1 12/10 The foam shell must be inserted in a flight case, which the user should purchase or have made by a specialised company. www.gfstudio.com 535 mm (21.06”) CLAY PAKY SPA - Via Pastrengo, 3/b - 24068 Seriate (BG) - Italy Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it ALPHA RANGE 300-700 W F21172 F21177 FOAM SHELL Le foam shell réf. F21172, F21177 est disponible pour tous les modèles Alpha de 300-700 W. C’est un accessoire fort pratique qui entoure et protège le produit au cours des déplacements d’une scène à l’autre. F21172: Alpha BEAM 300 Alpha SPOT 300 Alpha WASH 300 Alpha SPOT HPE 300 Alpha BEAM 700 Alpha WASH 700 Alpha SPOT HPE 700 F21177: Alpha PROFILE 700 Poid: 6,8 Kg 510 mm (20.08”) 535 mm (21.06”) RÉALISATION DU FLIGHT CASE: DIMENSIONS INTERNES Hauteur totale avec projecteur inséré Cod. XXXXXX 120 mm (4.72”) REMARQUE: Afin de bloquer le projecteur de manière sûre à l’intérieur du flight case pendant le transport, il faut fixer une cale, à réaliser par le fournisseur du flight case, sur la paroi interne du couvercle. Cette cale doit être réalisée en polyuréthanne expansé ou dans une matière similaire, de densité 30 kg/m, avec une largeur 120 mm (4,72”) et une hauteur qui dépend du modèle de flight case et, dans tous les cas, suffisante pour bloquer le produit. Rev. 1 12/10 Le calage en mousse doit être inséré dans un flight case que l’utilisateur doit acheter ou faire réaliser par une société spécialisée. www.gfstudio.com 535 mm (21.06”) CLAY PAKY SPA - Via Pastrengo, 3/b - 24068 Seriate (BG) - Italy Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it ALPHA RANGE 300-700 W F21172 F21177 FOAM SHELL Der Foam Shell Code F21172, F21177 ist für alle 300- 700 W Alpha Modelle erhältlich. Es handelt sich um ein wertvolles Zubehörteil, das das Produkt beim Transport von einem Set zum anderen schützt. F21172: Alpha BEAM 300 Alpha SPOT 300 Alpha WASH 300 Alpha SPOT HPE 300 Alpha BEAM 700 Alpha WASH 700 Alpha SPOT HPE 700 F21177: Alpha PROFILE 700 Gewicht: 6,8 Kg 510 mm (20.08”) 535 mm (21.06”) REALISIERUNG DES FLIGHT CASE: INNENABMESSUNGEN Gesamthöhe mit eingesetztem Projektor CLAY PAKY SPA - Via Pastrengo, 3/b - 24068 Seriate (BG) - Italy Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it Cod. XXXXXX 120 mm (4.72”) HINWEIS: Um den Projektor während des Transports innerhalb des Flight Case sicher zu halten, muss auf der Innenseite des Deckels ein vom Flight Case Hersteller gesondert anzufertigender Pufferstreifen angebracht werden. Dieser Pufferstreifen muss aus PURHartschaum oder ähnlichem Material mit einer Dichte von 30 kg/m und einer Breite von 120 mm hergestellt werden. Die Höhe ist abhängig von der Größe des Flight Case, und muss so gewählt werden, dass der Projektor fest gehalten wird. Rev. 1 12/10 Die Foam Shell wird in ein Flight Case eingesetzt, das von Kunden getrennt gekauft, oder von einer Spezialfirma angefertigt werden muss. www.gfstudio.com 535 mm (21.06”) ALPHA RANGE 300-700 W F21172 F21177 FOAM SHELL El foam shell cód. F21172, F21177 es disponible para todos los modelos Alpha de 300-700 W. Es un preciado accesorio, que envuelve y protege el producto en los desplazamientos de un set a otro. F21172: Alpha BEAM 300 Alpha SPOT 300 Alpha WASH 300 Alpha SPOT HPE 300 Alpha BEAM 700 Alpha WASH 700 Alpha SPOT HPE 700 F21177: Alpha PROFILE 700 Peso: 6,8 Kg 510 mm (20.08”) 535 mm (21.06”) REALIZACIÓN DEL FLIGHT CASE: MEDIDAS INTERNAS Altura total con proyector introducido Cod. XXXXXX 120 mm (4.72”) NOTA: Con el fin de bloquear el proyector de manera segura en el interior del flight case durante el transporte, se deberá fijar en la pared interna de la tapa un espesor, que se le encargará al proveedor de flight case. Dicho espesor deberá realizarse en poliuretano expandido o material parecido, con una densidad de 30 kg/m, anchura 120mm (4,72") y altura que dependerá del modelo de flight case y que deberá ser suficiente para bloquear el producto. Rev. 1 12/10 El foam shell se introduce en el interior de un flight case, que el usuario deberá comprar o encargarlo a una empresa especializada www.gfstudio.com 535 mm (21.06”) CLAY PAKY SPA - Via Pastrengo, 3/b - 24068 Seriate (BG) - Italy Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it