catálogo - Telalca

Transcripción

catálogo - Telalca

Fibra óptica
Hardware para fibra
Tabla de contenidos
Acerca de Nexans
3
Hardware para fibra
4
LANmark-OF Fixed Patch Panels
5
Paneles de parcheo LANmark-OF
6
LANmark-OF Angled Preloaded Patch Panel
7
LANmark-OF ENSPACE Patch Panels
9
LANmark-OF Fixed Preloaded Patch Panels
11
LANmark-OF Plug&Play Patch Panels
16
LANmark-OF Sliding Preloaded Patch Panels
18
2/05/16 - http://www.nexans.es
Página 2 / 21
Los dibujos, diseños, especificaciones, planos y detalles de pesos, medidas y dimensiones contenidos en la documentación técnica o comercial de Nexans
son meramente indicativos y no vincularán, ni se considerarán que constituyen una representación por parte de Nexans.
Acerca de Nexans
Nexans aporta energía a la vida a través de una extensa gama de cables y soluciones de cableado que permiten mejorar el
rendimiento de sus clientes en todo el mundo. Los equipos de Nexans actúan como socios al servicio de sus clientes en
cuatro sectores clave: transmisión y distribución de energía (submarina y terrestre), recursos energéticos (petróleo y gas,
minería y energías renovables), transporte (carretera, ferroviario, aéreo, marítimo) y construcción (comercial, residencial y
centros de datos).
La estrategia de Nexans se basa en la innovación continua de los productos, soluciones y servicios, la implicación de los
equipos, la asistencia técnica de los clientes y la adopción de procesos industriales seguros y respetuosos con el
medioambiente. En 2013 Nexans se convirtió en el primer actor de la industria del cable en crear una Fundación destinada
a sostener iniciativas para el acceso a la energía de los grupos de población más desfavorecida de todo el mundo.
Con presencia industrial en 40 países y actividades comerciales por todo el mundo, Nexans emplea a cerca de 26.000
personas. En 2014, el Grupo Nexans generó unas ventas de 6,4 mil millones de euros. Nexans cotiza en la bolsa NYSE
Euronext de París, compartimento A. Más información en: www.nexans.com
Página 3 / 21
Contacto
Sistemas de Cableado Estructurado
Teléfono: 91 799 17 50
[email protected]
Hardware para fibra
LANmark-OF ofrece conectividad de tecnología puntera que incluye paneles de
parcheo, distribuidores de zona y tomas de usuario.
Cada producto ha sido diseñado para ofrecer la mejor oferta cumpliendo con los
estándares internacionales.
Concepto modular
El diseño completamente modular permite la mezcla de diferentes adaptadores
Snap-In: LC, MT-RJ y SC. El beneficio: hasta 24 fibras en una caja de
distribución zonal y 48 fibras en un paneles de parcheo. Ambos son compatibles
con fibras ajustadas y holgadas.
Página 4 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
LANmark-OF Fixed Patch Panels
•
•
•
•
•
Empty OF patch panels with sliding mechanism.
Suitable for direct termination or splicing.
Available in two versions 24 ST or modular Duplex or simplex SC, LC, or MT-RJ snap-ins.
Inner sliding to respect bending radius of patch cord.
LANmark look.
Descripción
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels
with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using
Splice Cassette / pigtailed terminations. Accepts pre-terminated cable
assemblies.
Installation
•
•
•
•
19" width. 1U
Accommodates 24 ST or 24 LANmark-OF snap-ins (or 12DSC).
2 positions : flush or recessed with respect of cable bend radius.
Comes with marking strips to number and categorise ports.
Estándares
Internacional ISO/IEC 11801
Página 5 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
Paneles de parcheo LANmark-OF
•
•
•
•
•
Empty OF patch panels with sliding mechanism.
Suitable for direct termination or splicing.
Available in two versions 24 ST or modular Duplex or simplex SC, LC, or MT-RJ snap-ins.
Inner sliding to respect bending radius of patch cord.
LANmark look.
Descripción
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels
with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using
Splice Cassette / pigtailed terminations. Accepts pre-terminated cable
assemblies.
Installation
•
•
•
•
19" width. 1HU
Accommodates 24 ST or 24 LANmark-OF snap-ins (or 12DSC).
2 positions : flush or recessed with respect of cable bend radius.
Comes with marking strips to number and categorise ports.
Estándares
Lista de Productos
Ref. Nexans
N441.204
Nuevo
N441.203
Nuevo
Nombre
LANmark-OF Patch Panel Snap-In Sliding Black
LANmark-OF Patch Panel Snap-In Sliding White
= Realizar pedido,
= Reservar stock
Página 6 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
•
•
•
•
•
•
•
•
Preloaded patch panels with adaptors for fast installation in data centres
High density connectivity: 48 or 96 LC.
Singlemode and multimode
Removable tray for ease of installation, upgrade and maintenance
Optimised for installation of Pre-Term with a cable gland and fibre management features
Improved splice cassettes with lifting functionality for improved ease of installation and inspection
Patch panel with reduced depth
Angled patch panel for improved patch cord management within 1U
Descripción
The new preloaded patch panel is specifically designed for installation in data
centres where the high density, angeld design for improved patch cord
management and enhanced installation benefits of the patch panel meet the key
requirements for implementation.
The patch panels are preloaded with LC adaptors and are available in medium
and high density versions. The medium density patch panel provides 48 LC
connections, while the high density version has 96 LC connections. Singlemode
and multimode versions are available.
The angular shape is matching the shape of the Nexans copper V-shape panel.
This shape is perfectly suited to guide the patch cords horizontally to the side of
the panel.
The newly developed tray of the patch panel can be removed from the rack
completely to ease installation of direct terminated or spliced fibre and faster
installation of Pre-Term fibre.
The preloaded patch panel has extended rear cable management with multiple
entries to provide maximum flexibility. It accommodates both cable glands and tie
wraps for strain relief of the cables. The cable gland sizes are 20 mm (8x) and 25
mm (2x).
Estándares
For improved fibre management the fibres can be arranged in 4 separate loops
for added flexibility and organisation. The support bases and the rings for these 4
loops are included as standard.
The patch panel tray has multiple, specially designed, slots at the rear to fix the
cable glands of Nexans’ pre-terminated cables. There is ample space inside the
patch panel to organise the flexible fan-out of the pre-terminated cables.
Up to 4 splice cassettes (N890.090 and N890.091) can be installed inside the tray
of the patch panel. Only one cover (N890.092) is required to close the splice
cassettes at the top. The bottom splice cassette is fixed with screws to the tray of
the patch panel. Splice cassettes are fixed with hinges to the cassette below and
with such an installation the splice cassettes can be lifted and tilted for improved
access to the splices inside the patch panel. This facilitates the inspection of the
splices after installation.
Each splice cassette for heat shrink protection (N890.090) can accommodate 12
splices allowing a maximum of 48 splices for the complete patch panel.
The splice cassette for aluminium protection (N890.091) has a maximum of 24
splices resulting in a maximum of 96 splices per patch panel. N890.091 can only
be used with maxistrip pigtails and cables with 250 um fibres.
Splice cassettes are not included in the patch panel and must be ordered
separately.
Panels are fully painted in black for a professional look and feel.
Página 7 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
Lista de Productos
Ref. Nexans
N439.2A48LCMM
N439.2A48LCSM
N439.2A96LCMM
N439.2A96LCSM
Nombre
LANmark-OF Angled Preloaded Patch Panel 48 LC Multimode Black
LANmark-OF Angled Preloaded Patch Panel 48 LC Singlemode Black
LANmark-OF Angled Preloaded Patch Panel 96 LC Multimode Black
LANmark-OF Angled Preloaded Patch Panel 96 LC Singlemode Black
= Realizar pedido,
= Reservar stock
Página 8 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
•
•
•
•
•
•
•
Optical patch panel with Ultra High Density: up to 144 LCs or 72 MTP in a rack height unit
Up to 12 ENSPACE modules in 1U
3 individually sliding trays per 1U for maximum flexibility during operation and installation
Patch cord management for each individual tray
Labelling front for port identification
Sliding and tilting tray at the rear of the panel for better access to cables during initial installation and additions
Optimised for installation of LANmark-OF ENSPACE Pre-Term with cable glands
Descripción
The Nexans' ENSPACE concept is designed for data centres where the high
density, integrated patch cord guides and enhanced installation benefits of the
ENSPACE patch panel meet the key requirements for implementation. It allows
quick changes with limited down time, easy migration to other applications and a
transition path to 40G/100G.
The LANmark-OF ENSPACE system consists of 3 sub-components: Pre-Terms,
modules and patch panels.
The Nexans’ unique ENSPACE patch panel design has 3 sliding trays within 1U.
Each tray can have up to 4 ENSPACE modules. The panels can accommodate
within 1U up to 12 modules allowing 144 LC connections when modules with LC
adaptors are used. With LANmark-OF ENSPACE MTP adaptor modules 72 MTP
connections within 1U can be installed. ENSPACE modules need to be ordered
separately.
Estándares
The ENSPACE Patch Panels are available in 1U, 2U and 4U. The panels are
designed for installation inside 19 inch enclosures.
The newly developed tray slides have 3 locking positions.
• The operational position when the trays are completely in the rack.
• The patching position when the tray is moved forward by 75 mm. This allows
easy access to the patch cords.
• The installation position when the tray is almost completely out of the rack. This
allows installation of the ENSPACE modules from the front with access to the
rear of the ENSPACE module.
The sliding trays have printed letters to identify the individual trays. Additional
side grips on the left and right enhance the pulling forward of the tray.
The LANmark-OF ENSPACE Pre-Terms are fixed on a separate, sliding and tilting
tray in the rear of the panel. For installation of the cables the tray can be slid out
of the patch panel by about 15 cm. This allows easy access to the fixing points for
the cables without being in the small space formed by the panel above and
underneath in a high density rack. On this tray 2 cable fixing kits can be mounted.
The slots are suitable for a PG-13 cable gland. The orientation of the fixing kit can
be modified to allow for side, angled or rear entry. An optional third cable fixing kit
can be installed on the tray as well.
The patch panel is optimised for installation of the LANmark-OF ENSPACE PreTerms: the cable gland of the Pre-Term allows a fast and solid fixing of the cable.
Página 9 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
There is ample space inside the patch panel to organise the flexible fan-out of the
Pre-Terms, including the additional fan-out overlength required to allow the
individual trays to slide to the patching or installation position.
A labeling front sits in front of the modules. It can rotate almost 180° even when
ENSPACE patch panels are installed underneath. This facilitates port
identification when the panel is mounted at the top of the rack.
The total depth of the panel is 526mm. The panels are delivered with the labeling
front projection 129mm in front of the rack vertical. The rear of the panel is
397mm recessed compared to the rack vertical. The position of the panel inside
the rack can be changed with adjustable side brackets. It can be moved
backwards compared to the rack vertical by 37.5mm or forward by 37,5mm or
75mm.
Página 10 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
•
•
•
•
•
•
•
Preloaded patch panels for fast installation.
Singlemode or multimode quad LC or duplex SC adaptors preloaded
Fibre organiser for fibre management or splice cassettes pre-installed
Available in black; white versions available on request
High densisty: 24 SC/ 48 LC or 48 SC/ 96 LC
LANsense Upgradeable
Pre-Term ready
Descripción
Characteristics
The patch panels are preloaded with either quad LC adaptors or duplex SC
adaptors. Singlemode and multimode options are available.
The preloaded patch panels are available in medium and high density. The
medium density patch panel provides 24 SC or 48 LC connections, while the high
density version has 48 SC or 96 LC connections.
The newly developed patch panel chassis has multiple specially designed slots at
the rear to accept the Nexans' pre-terminated cables. This chassis also allows
the incomming fibre to be managed in a number of ways for added flexibility.
A specially designed fibre organiser facilitates the fibre management inside the
patch panel. The fibre organiser consists of spindles which are pre-installed when
using pre-terminated cables or for direct termination on site. For 48 fibres one
level with 2 spindles are provided. For 96 fibres 2 levels of spindles with a total of
4 spindles are preloaded.
Estándares
Splice cassettes and cassette covers are pre-installed for terminations with
pigtails. For up to 48 fibres, splice cassettes for heat shrink are pre-installed. For
more then 48 fibres splice cassettes for Aluminum protection are provided.
Pigtails and splice protectors are not included.
The front plate can be fixed at various depthsflush or sub-flush. This provides
maximum flexibility for patch cord management.
LANsense upgradeability
The panels are LANsense upgradeable. This unique feature provides a high level
of flexibility for future upgrades without the need for an immediate investment.
The standard frontplate can easily be upgraded to a LANsense PCB plate without
the need for any removal or re-termination of the installed cabling. This upgrade
adds a detection contact to each cabling port and an I/O connector so that the
panel can be connected to the LANsense system.
Página 11 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
Características
Características dimensionales
Width
Unidades de altura
Fondo
19 in
1U
268 mm
Página 12 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
N number codification: N441.2ANNCCFFM
Common part
N441.2
B: Black
A: Colour
W: White
NN: number of connections 24, 48 or 96
CC: Connector type
SC or LC
SM: Single Mode
FF: Fibre type
MM: Multimode
O : fibre organiser for pre-terminated solutions and direct termination
M: Fibre management
H : splicing with heat shrink splice cassettes
A: splicing with splice cassettes with Aluminium protection
Available patch panels for splicing with splice cassettes
N-number
Description
SC or LC # connections SM or MM
LANmark-OF Preloaded Patch Panel 48 LC
N441.2B48LCSMH Singlemode Splice Cass (HS) LSU Black
LC
48
SM
N441.2B96LCSMA Singlemode Splice Cass (Alupro) LSU Black
LC
96
SM
N441.2B48LCMMH Multimode Splice Cass (HS) LSU Black
LC
48
MM
N441.2B96LCMMA Multimode Splice Cass (Alupro) LSU Black
LC
96
MM
LANmark-OF Preloaded Patch Panel 24 SC
N441.2B24SCSMH Singlemode Splice Cass (HS) LSU Black
SC
24
SM
N441.2B48SCSMH Singlemode Splice Cass (HS) LSU Black
SC
48
SM
N441.2B24SCMMH Multimode Splice Cass (HS) LSU Black
SC
24
MM
N441.2B48SCMMH Multimode Splice Cass (HS) LSU Black
SC
48
MM
Página 13 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
Available patch panels for Pre-Term and field connectorisation with fibre organiser
N-number
Description
SC or LC #connections SM or MM
N441.2B48LCSMO
Singlemode Fibre Organiser LSU Black
LC
48
SM
N441.2B96LCSMO
LC
96
SM
N441.2B48LCMMO
Multimode Fibre Organiser LSU Black
LC
48
MM
N441.2B96LCMMO
LC
96
MM
N441.2B24SCSMO
SC
24
SM
N441.2B48SCSMO
SC
48
SM
N441.2B24SCMMO
SC
24
MM
SC
48
MM
N441.2B48SCMMO
Patch panel types
Medium density patch panel
This version provides 24 SC or 48 LC connections
The adaptors are installed horizontally
High density patch panel
This version provides 48 SC or 96 LC connections.
Página 14 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
The adaptors are installed vertically.
Página 15 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
•
•
•
•
•
•
•
Optical patch panel that holds up 4 Plug&Play modules or adaptor plates in 1U
High density connectivity: up to 48 SC or 96 LC depending on module type.
Sliding and tilting patch panel for ease of installation, upgrade and maintenance
Optimised for installation of LANmark-OF Pre-Term with a cable gland
Optimised for splicing with LANmark-OF Pigtails or Cassettes
Labelling front for port identification and patch cord management within 1U
UL listed
Descripción
The Nexans' Plug and Play concept is specifically designed for installation in data
centres where the high density, integrated patch cord guide and enhanced
installation benefits of the patch panel meet the key requirements for
implementation.
The Nexans unique patch panel design allows to hold up to 4 MPT modules or
adaptor plates in 1U of the distribution rack. Depending on the type of the module
a high density of up to 96 fibre connections can be accommodated.
The new patch cord guide sits in front of the modules and allows the patch cords
to be managed within the same 1U saving expensive rack space. The patch cord
guide also provides a labelling facility to identify connections. Additional labelling
is provided by printed port numbers on the modules.
The newly developed tray slides and tilts for improved access to install new
modules and adaptor plates.
Estándares
The patch panel is optimised for installation of the LANmark-OF MTP/MTP or SC/
LC Pre-Term Trunks. The cable glands of the Pre-Term allow a fast and solid
fixing of the cable. There is ample space inside the patch panel to organise the
flexible fan-out of the Pre-Term.
The LANmark-OF Fibre Organiser (N890.070) fits in the patch panel to facilitate
the installation of the SC/LC Pre-Term.
The various modules of the LANmark-OF Plug&Play modules (e.g.
N441.5L24LC4FS and N441.4L12LC4FS) can be easily fit in the patch panel.
Inside the patch panel the following splice cassettes can be installed:
• N890.090: LANmark-OF Splice Cassette Heat Shrink Protectors
• N890.091: LANmark-OF Splice Cassette Aluminium Protectors
• N890.092: LANmark-OF Splice Cassette Cover
For information regarding the possible combinations for splice cassettes,
maxistrip/tight buffer pigtails and cables please consult the installation guide.
Panels are fully painted in black for a professional look and feel. Blank fillers
(N441.2MBP) are available as separate accessories for unused positions to give
a finished look.
The front adaptor plate can be fixed in a flush or recessed position in the rack
using the adjustable side brackets. When the panel is installed recessed the
Página 16 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
distance between the rack vertical and the rear of the panel is 288 mm. The front
cord management projection is 67 mm. When the panel is installed flush the
cord management projection is 107 mm.
Página 17 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
•
•
•
•
•
•
Preloaded patch panels with adaptors for fast installation in data centres
High density connectivity: up to 48 SC or 96 LC.
Sliding and tilting patch panel for ease of installation, upgrade and maintenance
Optimised for installation of Pre-Term with a cable gland and fibre management features
Improved splice cassettes with lifting functionality for improved ease of installation and inspection
Labelling facility for port identification and patch cord management within 1 U
Descripción
The new pre-loaded patch panel is specifically designed for installation in data
centres where the high density, integrated patch cord guide and enhanced
installation benefits of the patch panel meet the key requirements for
implementation.
The patch panels are pre-loaded with SC or LC adaptors and are available in
medium and high density versions. The medium density patch panel provides 24
SC or 48 LC connections, while the high density version has 48 SC or 96 LC
connections. Singlemode and multimode versions are available.
The new patch cord guide sits in front of the adaptors and allows the patch cords
to be managed within the same 1 U saving expensive rack space.
The patch cord guide also provides a labelling facility to identify connections.
Additional labelling is provided by printed port numbers on the adaptor plate.
The newly developed chassis of the patch panel can be removed from the rack
completely to ease installation of direct terminated or spliced fibre and faster
installation of pre-terminated cables. The tray tilts and slides for improved access
to the installed fibres for inspection.
Estándares
The pre-loaded patch panel has extended cable management with multiple
entries to provide maximum flexibility. It accommodates both cable glands and tie
wraps for strain relief of the cables. The cable gland sizes are 20 mm (8x) and 25
mm (2x).
For improved fibre management the fibres can be arranged in 4 separate loops
for added flexibility and organisation. The support bases and the rings for these 4
loops are included.
The patch panel chassis has multiple, specially designed, slots at the rear to fix
the cable glands of Nexans’ pre-terminated cables. There is ample space inside
the patch panel to organise the flexible fan-out of the pre-terminated cables.
Up to 4 splice cassettes (N890.090 and N890.091) can be installed inside the tray
of the patch panel. Only one cover (N890.092) is required to close the splice
cassettes at the top. The bottom splice cassette is fixed with screws to the
chassis of the patch panel. Splice cassettes are fixed with hinges to the cassette
below and with such an installation the splice cassettes can be lifted and tilted for
improved access to the splices inside the patch panel. This facilitates the
inspection of the splices after installation.
Each splice cassette for heat shrink protectors (N890.090) can accommodate 12
splices allowing a maximum of 48 splices for the complete patch panel.
The splice cassette for aluminium protectors (N890.091) has a maximum of 24
splices resulting in a maximum of 96 splices per patch panel. N890.091 can only
be used with maxistrip pigtails and cables with 250 um fibres.
Splice cassettes are not included in the patch panel.
The front adaptor plate can be fixed in a flush or recessed position in the rack
using the adjustable side brackets. When the panel is installed recessed the
cord management projection is 67 mm. When the panel is installed flush the
cord management projection is 107 mm.
Página 18 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
Página 19 / 21
Contacto
Teléfono: 91 799 17 50
[email protected]
Lista de Productos
Ref. Nexans
N439.2B48LCMM
N439.2B48LCSM
N439.2B96LCMM
N439.2B96LCSM
Nombre
LANmark-OF Preloaded Patch Panel 48 LC Multimode Sliding Black
LANmark-OF Preloaded Patch Panel 48 LC Singlemode Sliding Black
LANmark-OF Preloaded Patch Panel 96 LC Multimode Sliding Black
LANmark-OF Preloaded Patch Panel 96 LC Singlemode Sliding Black
= Realizar pedido,
= Reservar stock
Página 20 / 21
Experto global en cables y sistemas de cableado
Distribuído por :
Nexans Iberia, S.L. - Ctra. de Sentmenat, Km 2,6 - E-08213 Polinyà (Barcelona) - España
+34 93 713 11 33 - [email protected]

catálogo - Telalca

Transcripción

Documentos relacionados

high speed patch handle high quality high speed patch handle

tX6™ pLUS Utp patch cords - Carlton