ficha técnica data sheet

Transcripción

ficha técnica data sheet
E70
PRO
DATA SHEET
Wind Turbine
With average wind speed of 10 - 12 m/s
the model Enair 70 is capable of
generating more than 70 kWh/day.
TECHNICAL, ELECTRICAL
AND OPERATIONAL FEATURES
Number of Blades
Blades material
Generator
3
Fibreglass epoxy resins and polyurethane core.
250 rpm | neodymium magnets
Power
5500 W
Rated power curve
4000 W
Voltage
Wind class
Diameter
Turning sense
Swept area
Weight
24 / 48 / 220
IEC / NVN I - A
4,3 m
Clockwise
14,5 m²
165 kg
Applications
Isolated connection batteries, electric grid connection.
Wind to start
1,8 m/s
Rated speed
12 m/s
Speed regulation of pitch
13 m/s
OPTIMAL PRODUCTION
EVEN MORE THAN 165km/h
POWER CURVE
kW
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
Supports speeds of:
Efficient generation range
Type
Orientation
Power control
Transmission
Brake
Controller
Inverter
5
From 2 to more than 60 m/s
Upwind horizontal rotor.
kW
Passive variable, centrifugal pitch system.
12000
Optional grid connection and battery charging.
Efficiency 95%; MPPT algorithm.
Minimised: due to the design of the blades and low revolutions.
1% more that the environmental noise of the wind.
Anti corrosive protection
Fully sealed design, with elements of metal cataphoresis, epoxy
paint for salt environments of water proof coating.
20
25
ANNUAL PRODUCTION
20000
16000
Electrical
15
18000
Rudder passive yaw system.
Direct
10
Wind speed (m/s)
More than 60 m/s
Noise
Tower
500
14000
10000
8000
6000
4000
2000
2
4
6
8
10
Wind speed (m/s)
12, 15 y 18 m, folding, cable-stayed or lattice.
Avenida IBI, 44 – P.O. 182 C.P. 03420 | Castalla (Alicante ), España
+34 96 556 00 18
[email protected]
w w w. e n a i r. e s
12
PASSIVE VARIABLE
PITCH
Patented technology to maximize energy production
It is a mechanical system due to what the aerodynamic vector
of the blades is modified to obtain the maximum energy in each
case and never exceeds its rotor rpms.
E70PRO Wind Turbine
TECHNICAL PROFILE
It achieves:
Less noise
More ability to absorb high winds
More consistency in the generation
More energy with less wind
ELECTRONIC
CONTROL
System of intelligent energy management
Batteries connection:
7 types of programmable batteries (lithium, lead, gel, etc.)
Charging shunt resistor pulses if overload. The excess which
can’t be charged is derived to protect the batteries.
Grid connection:
Through the MPPT inverters, which are programmed by the
wind power curve which maximises energy times.
Compatible with triphasic grids, monophasic and European
and American systems.
4,3 m
165 kg
A NEW DESIGN, A NEW ENERGY
When you apply the latest technology in design,
the latest simulation technology, the best materials
on the market and combine everything with more
than 40 years of experience the result is:
the best wind turbine on the market
3,4 m
Minimum noise
The noise is around 1% above ambient
noise, being invaluable to
our ears.
Maximum efficiency
MORE EFFICIENCY
A PMG with more powerful magnets and a
rotor fully integrated in the magnetic sheet,
with improved profiles of the blades makes
us with less wind to be more efficient.
MORE STURDINESS
The whole design has been developed
based on a centre of gravity positioned for
balance tension and improve the loads.
It works with a simple breeze of 2m/s and
continues running at more than 40m/s
without losing efficiency in energy production.
Anticorrosive
It is trated with cataphoresis, which
becomes a covering anticorrosive and
perfect for salt on islands and coasts.
Hermetic
Hermetically sealed alltogether, to
avoid microparticles, humidity air entering
and prevents damage to coastal or
desert areas which have a lot of sand.
MORE SECURITY
MORE ENERGY
By incorporating new materials like carbon
and the integration of the epoxy resins
with steel, the safety factors increase
reaching Fs=9.
Making all these improvements and
applying the computational fluid dynamics
we improve up to 15% at the energy
production.
Sturdiness
To withstand strong winds and offer a
long operating life all equipment parts
are oversized.
IN CERTIFICATION PROCESS...
Avenida Ibi, 44 – P.O. 182 C.P. 03420 | Castalla (Alicante ), España
+34 96 556 00 18
[email protected]
w w w. e n a i r. e s

Documentos relacionados