product catalog

Transcripción

product catalog

> PRODUCT
CATALOG
www.grupoacerero.com.mx
REBAR
MEXICAN STANDARD NMX–B-506
The rebar manufactured by GRUPO ACERERO meets
the highest quality, attached to Mexican standard
NMX-B-506-CANACERO–2011 and USA standard
ASTM-A615M and ASTM-A706M.
Special rod orders to different chemical and physical
characteristics (weldability, ductility, diameter and
length, among others) based on our markets’
requirements are also manufactured.
For all the steel grades, quality certificate ensuring
compliance according to the relevant standard, is
issued.
Nominal Dimensions
Bar Designation No.
Size
Cross-Sectional Area
Diameter
in
mm
3/8”
0.375
9.5
4
1/2”
0.500
12.7
5
5/8”
0.625
15.9
6
3/4”
0.750
8
1”
10
1” 1/4
12
1” 1/2
3
in2
Tensile Strength,
min, psi (kg/cm2)
kg/m
0.11
71
0.376
0.560
0.20
127
0.668
0.994
0.31
198
1.043
1.552
19.0
0.44
285
1.502
2.235
1.000
25.4
0.79
507
2.670
3.973
1.270
31.8
1.27
794
4.303
6.225
1140
6.464
8.938
1.500
38.1
1.76
Bend Teste Requirements
Yield Strength,
min, psi (kg/cm2)
3, 4, 5 y 6
7, 8
10 y 12
90000 psi
(6,300 kg/cm2)
Nominal Mass
lb/ft
Tensile Requirements
Bar
Designation
No.
Nominal Weight
mm2
60000 psi
(4,200 kg/cm2)
Elongation 8in
(200 mm), min, %
Bar
Designation
No.
9
3, 4, 5
8
6, 7, 8
7
10
12
Grade 60 (42)
Marking
Designation No.
GASA
Grade
Point of origin
G
3, 4, 5, 6, 8, 10, 12
Designation No.
N
Type of steel
(Standard NMX-B-506-CANACERO-2011)
42
Yield Strength, min, kg/cm2
A
S
A
8
N
4
2
Standard NMX-B-506
Point of origin
Packaging specifications straight and bent rebar
Diameter (inches)
Presentation
Length
Rods/ Package
Packages/Bundle
Rods per ton (depending on length)
Rods/ Bundle
3/8”
Bent
12.0 m
15 a 25
15 a 25
375
149 a 154
3/8”
Straight
12.0 m
15 a 25
15 a 25
375
149 a 154
3/8”
Straight
9.15m
200
196 a 202
Bent
12.0 m
10 a 15
2
14 a 21
400
1/2”
210
86 a 86
1/2”
Straight
12.0 m
10 a 15
14 a 21
210
86 a 86
1/2”
Straight
9.15m
110
2
220
110 a 113
5/8”
3/4”
Straight
12.0 m
53
12.0 m
37
2
2
106
Straight
1”
Straight
12.0 m
21
2
42
53 a 55
37 a 38
21
1” 1/4
Straight
12.0 m
13
2
26
13
1” 1/2
Straight
12.0 m
9
2
18
9
74
NOTE: Cut to order based on customer needs (special lengths). Various corrugation types according to end consumer needs available.
Packaging specifications coil rebar
Bar Designation No.
Diameter
(mm)
Weight lbs (kg)
Internal Diameter
External Diameter
2
7.9
3
9.5
3,174 lbs (1,440 kg)
3´ to 3´2”
3´9” to 4´
4
12.7
5,291 lbs (2,400 kg)
(0.91 m to 0.97 m)
(1.14 m to 1.22 m)
5
15.9
Length
4.82 ft - 5.90 ft
(1.47 m - 1.80 m)
These products earn the following LEED® credits thanks to regional, recycled material content
LEED® v4
• Prerequisite MRp:
Construction and demolition waste management planning.
• Credit M12: Construction Waste Management.
• Building Product disclosure:
- Material ingredients
- Sourcing of raw materials
• MCr2: Construction Waste Management.
• MRc4: Recycled Content.
• MRc5: Reegional Materials.
WIRE ROD
NMX-B-365
a) Industrial wire rod (T)
b) Construction wire rod (C)
Carbon steel wire it is used to manufacture other wires
with finishes and specific uses within a particular
industrial process.
Uses: Wire drawing thinner wires, component finished
products.
The ability to manufacture special wire rod have:
chemical composition with or without treatment,
presentation, diameter, etc.
Carbon steel wire used in the construction
industry to form figures of reinforcing steel
(stirrups and ties).
It is produced in diameters from 0.219 in to 0.866 in (5.5
mm to 22 mm), in three different carbon contents: low,
medium and high. According to customer requirements
Coil Specifications
Weight lbs (kg)
Internal Diameter
External Diameter
Length
3,150 lbs to 5,159 lbs
3´ to 3´2”
3´9” to 4´
3´11” to 6´4”
(1,430 kg to 2,340 kg)
0.91 m to 0.97 m
1.14 m to 1.22 m
1.19 m to 1.93 m
Presentation
1.4t to 2.4t
LEED® v4
REINFORCING WELDED MESH
NMX-B-290, NMX-B-253, NMX-B-072
The reinforcing mesh is a welded mesh formed with steel rods arranged
perpendicularly and joined by a process of electrical resistance welding. It is used
as reinforcement of concrete floors, walls and slabs, and other special applications
such as concrete pipes, canals and roads among others.
Specifications
Sizes
Presentation
6x6 10/10
2.50 m x 6.0 m sheet
6x6 8/8
2.50 m x 40.0 m roll
6x6 6/6
6x6 4/4
NOTE: Different sizes can be manufactured, based on customer needs.
LEED® v4
PREFABRICATED REINFORCING WELDED ELEMENT
ARMACERO
NMX-B-456
Is a reinforcement consisting of longitudinal and transverse wires welded together
through resistance. Often it used as steel reinforcement in beams and columns.
It is supplied in sheets to wholesalers, who assemble the columns and distribute them
through sub-wholesalers and retailers.
Desing
Specifications
Type
IN
10x10-3
X
12x12-3
X
15x15-3
X
12x 12-4
X
2R
3R
X
X
15x 15-4
X
12x 20-4
X
15x 20-4
X
X
X
15x 25-4
X
X
X
15x 30-4
X
X
X
Type
Diameter
longitudinal G-60
transversal G-50
IN
5.72 mm
3.60 mm
2R
7.25 mm
4.88 mm
3R
7.94 mm
4.88 mm
LEED® v4
PREFABRICATED LATTICE RIB
ARMAGASA
NMX-B-455
Electrically armor in a product, used to manufacture semi-prefabricated concrete
beams, consisting of three longitudinal rebars forming a triangular section, the lower
are welded to the upper lattice stirrups smooth wire.
Specifications
Size
Presentation
10-36
10-64
19.68, 22.97 and 29.52 ft
12-36
(6.0, 7.0 and 9.0m) sections
12-99
Availability to make other lengths
14-36
14-64
14-99
LEED® v4
ANNEALED WIRE
NMX-B-072
The characteristic of our annealed wire is its ductility, making them optimal for moorings in work
and in various industrial processes
Specifications
Size
Presentation
10 to 18 gauge
( 0.135 in to .048 in)
110 lbs to 661 lbs coil
LEED® v4
NAIL
NMX-B-505
Nail standard steel for construction. It is manufactured in measures 2 to 4 inches and
is generally used for assembling wooden falsework.
Specifications
Size
Presentation
2”
2 ½”
3 ½”
55.12 lbs (25 kg) box
4”
LEED® v4
COLD ROLLED REBAR MS-60
NMX-B-072
The Cold-Drawn Rebar MS-60 is highly resistant to stress, by its manufacturing
process of cold rolling.
With this rebar you save up to 30% of the steel used in construction; compared
to traditional hot rolled rebar.
Specifications
Size
Grade
Presentation
5/32”
3/16”
¼”
60
Length 20´and 40´
Availability to make other lengths 6.5 ft to 40 ft
5/16”
LEED® v4
STIRRUP
NMX-B-072
The stirrup are steel wire rods bent into a different shapes, which are placed
perpendicular to the longitudinal reinforcement. They serve to position bars in
the assembly of reinforcing elements. They are responsible to resist shear forces
and diagonal tension that may affect an item.
Specifications
Size
Type of wire rod
Presentation in
packages of 100 pz. (kg)
15×15
15×20
15×25
13.4
6.35 mm
15×30
15.5
18
20.4
LEED® v4
STEEL ROUND BAR
ASTM-A-706, ASTM-A-36
Grupo Acerero commercial steel round bars are manufactured with the highest
quality standards (ASTM-A-706, ASTM-A-36).
Additionally, special product orders, are manufactured with different physical and
chemical characteristics as required.
The Round Bar Product is a hot Rolled Carbon Steel Produced Commercial Quality.
Nominal Dimensions
Cross-Sectional Area
Nominal Weight
mm
in2
mm2
lb/ft
Kg/m
0.375
9.5
0.11
71
0.376
0.560
1/2”
0.500
12.7
0.20
129
0.668
0.994
5
5/8”
0.625
15.9
0.31
199
1.043
1.552
6
3/4”
0.750
19.1
0.44
284
1.502
2.235
8
1”
1.000
25.4
0.79
510
2.670
3.973
10
1” 1/4
1.270
32.3
1.27
819
4.303
6.404
12
1” 1/2
1.500
38.1
1.76
1140
6.464
8.938
Bar
Designation
No.
Size
3
3/8”
4
Diameter
in
Presentation
20 ft or 45 ft- 3in,
Bundle whit 1, 2 or 4 ton.
NOTE: Cut to lenght based on customer needs (special lengths).
LEED® v4
CONTACT
Plant 122
Eje 122 and Avenida CFE
Zona Industrial 78395
San Luis Potosi, SLP, México
Tel. +52 (444) 870 7100
Plant 132 / Sales office
Eje 132 and Avenida Industrias, # 4530
Tel. +52 (444) 826 98 00
Plant 108
Eje 108 S/N
Tel. +52 (444) 824 78 95
Plant 128
Eje 128, # 222
Tel. +52 (444) 824 20 14
www.grupoacerero.com.mx

product catalog

Transcripción

Documentos relacionados

LEED Certification Avenida Sofía Hotel Spa – LEED Platinum

SALES - VILLAS - LAS TERRENAS - SAMANÁ

1 What does sustainable living mean to you?