Wrap-Around Terminals for Cu 2 1
Transcripción
Wrap-Around Terminals for Cu 2 1
s U.S. Cat. No. Item: Wrap-Around Terminals for Cu Bornes de conexión tipo marco para Cu Boite à bornes pour raccordement de cable Cu Euro Order No. TW1JG600 3VL9460-4TC01 3TW1JG600 3VL9460-4TC31 4TW1JG600 3VL9460-4TC41 For Use With Frame JG Para Usar Con Caja Base JG Installation Instructions / Instructivo de Instalación Hazardous Voltage. Will cause death or serious injury. Tensión peligrosa. Puede causar la muerte o lesiones graves. Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio. working on this device. Reemplace todas las barreras y cubiertas antes de Replace all covers before power supplying this device is energizar el interruptor. turned on. Tension dangereuse. Danger de mort ou risque de blessures graves. Couper l'alimentation de l'appareil et barrer avant de travailler. Remplacez touts les couverts avant que l'approvisionnement de pouvoir soit alimenté. Use only with Siemens certified Components. Utilizar únicamente con componentes certificados de Siemens. A utiliser uniquement avec les composants certifiés Siemens. 5/16“ [ 8 mm ] Cal. ISO 6789 NOTE - These instructions do not purport to cover all details or variations in equipment, or to provide for every possible contingency to be met in connection with installation, operation or maintenance. Should further information be desired or should particular problems arise, which are not covered sufficiently for the purchaser’s purposes, the matter should be referred to the local Siemens sales office. The contents of this instruction manual shall not become part of or modify any prior or existing agreement, commitment or relationship. The sales contract contains the entire obligation of Siemens. The warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements contained herein do not create new warranties or modify the existing warranty. JG (Cu) TW1JG600 / 3VL9460-4TC01 = 1 X 3TW1JG600 / 3VL9460-4TC31 = 3 X 4TW1JG600 / 3VL9460-4TC41 = 4 X Trademarks - Unless otherwise noted, all names identified by ® are registered trademarks of Siemens AG or Siemens Industry, Inc. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. 1 2 2X Trip [ Interrumpir ] 2X 1/2 8 0 6 8 7 3 A 0 2 I.L. 806873A02 3 4 5 “A” 2 X 11 lb. in. [ 1.2 Nm ] 5/16“ [ 8 mm ] 6 X 310 lb. in. [ 35 Nm ] 2 X 11 lb. in. [ 1.2 Nm ] Wire Connector [ Conexión del cable ] 5/16“ OR [ 8 mm ] Wire Size [ Rango Cable ] Cu Only 1/0 AWG – 600 kcmil [ 70 – 300 mm² ] UL 486A - 486B Req. Wire Stranding ( Cable ) CU only Class B CU only Class C 1/0 – 4/0 AWG [ 70[ 70 – 95 – 95 mm] 2 ] 1/0 – 4/0 AWG [ 70[ 70 – 95 – 95 mm] 2 ] 19 STRANDS 37 STRANDS 250 - 600 kcmil 250 - 600 kcmil [ 150 – 300 2] [150 –300 mm2 mm ] 250 - 600 kcmil [150 [150–300 –300 mm2 mm2 ] 37 37 STRANDS STRANDS 61 STRANDS Torque [ esfuerzo de torsión ] 310 lb.in. [ 35 Nm ] Wire Strip Length [ Quitar ] “A” 1.40” [ 36 mm ] For Support in Europe refer to : Bestell-Nr. / Order No.: 3ZX1012-0VL68-5AA3 Technical Support: Subject to change without prior notice Siemens Industry, Inc. , Norcross, GA 30092 U.S.A. Internet: www.siemens.de/lowvoltage/technical-assistance Toll Free: 1-800-241-4453 2/2 GWA 4NEB 179 6873-10 DS 03 Internet: www.usa.siemens.com/powerdistribution © Siemens Industry Inc. 2010 806873A02
Documentos relacionados
Wrap-Around Terminals for Cu, Terminal for Cu / Al 1
Replace all covers before power supplying this device is energizar el interruptor. turned on.
Más detallesMounting Screw Kit
Replace all covers before power supplying this device is energizar el interruptor. turned on.
Más detalles