estudio tv - Grau Luminotecnia

ESTUDIO TV
GRAU LUMINOTECNIA, S.A.
www.grauluminotecnia.com
Gran Via Corts Catalanes, 401
08015 BARCELONA
Tel. 933 257 611 – Fax 934 263 029
[email protected]
Martín Machío, 13
28002 MADRID
Tel. 914 158 604 – Fax 914 158 062
[email protected]
La firma IANIRO actual es una descendiente de la original “Ianiro”
establecida en 1948 como fabricante de iluminación para los
Estudios Cinecittà de Roma.
En los años 50 y 60 fueron ampliando sus actividades con la
fabricación de nuevos productos de iluminación y grip.
Ianirlite 1954
Prototipos famosos de aquella época son el “Ianirlite” (1954), el
“Juno” (1956) Y EL “Inky Dinky” (1960) cuyas imágenes
acompañan este texto.
También por los años 60 aparecieron los famosos “redheads”
equipados con las lámparas de tungsteno GE QuartzLine.
En 1965 Ianiro diseñó el primer proyector “daylight” con lámpara
Osram HMI 575W D.E.
Juno 1956
En Mayo de 1972 Aldo Ianiro fundó “Ianiro Aldo Srl”, de la cual en
el día de hoy sigue como Presidente, aportando su valiosa
experiencia.
En todos estos años la producción de “Ianiro” ha ido creciendo y
diversificando, ofreciendo actualmente una amplia gama de
Cuarzos, Fresnels hasta 2kW, Kits y Antorchas para cámara.
GRAU LUMINOTECNIA tomó la distribución para España de los
productos IANIRO hace más de 20 años y desde entonces ha
mantenido una estrecha colaboración con la firma italiana que ha
redundado en una amplia difusión de los productos IANIRO en
nuestro territorio, con un eficiente servicio postventa.
Inky Dinky 1960
ESTUDIO TV
ESTUDIO TV
MINISPOT 300/500W
SOLARIS 650W
SOLARIS 1KW
SOLARIS 2KW
CICLORAMA
SOFTLIGHT
La gama IANIRO de ESTUDIO TUNGSTENO incluye proyectores Fresnel Estudio y
Ciclorama, destinados a satisfacer las necesidades que presentan los Directores de
Fotografía de todo el mundo.
La gama de Fresnels IANIRO comprende:
El Minispot 300/500W, y los proyectores Solaris 650W, 1000/1250W y el de 2 kW.
Disponibles en Manual y Pole Operated, todos los Fresnels IANIRO ofrecen iluminación
equilibrada, precisión de enfoque, robustez, larga duración y fácil mantenimiento.
La gama Cyclorama IANIRO incluye unidades simples y conjuntos de cuatro unidades
para montar suspendidas o en el suelo. Todos los aparatos llevan parabólico asimétrico y
pueden usar lámparas lineales de 625 ó 1250W y proporcionan una luz suave ideal para
cualquier tipo de fondos y cicloramas.
La familia Softlite IANIRO ha sido diseñada con una simple pero efectiva necesidad en
mente: iluminar grandes áreas suavemente y sin sombras tal y como se necesita para
cine y también para fotografía. Los Softlites son cajas de luz cuadradas con el interior
pintado de blanco mate.
Este diseño produce una luz sin sombras como ningún otro aparato con “soft box” puede
dar. Un beneficio complementario es que las lámparas están colocadas en una barra
giratoria que permite usar también los Softlites como una potente luz directa principal o
como luz para ciclorama.
Colocados en línea juntamente con Fresnels para mayor contraste y profundidad de
campo, los Softlites IANIRO son fáciles de mantener y muy versátiles en Estudios de TV
y grandes platós fotográficos.
MINISPOT
code 1200
Specifications
Construction: cast aluminum.
Heat resistant matt black finish.
Fresnel lens Ø 80 mm. (3 1/4" ) F 50
Extra-pure polished aluminum reflector.
Lampholder GY 9,5.
Fitting lamps 300w CP81 e 500w CP82 (3200°k)
Spot-flood rear knob.
Aluminum yoke with 5/8" (16 mm.) socket.
Power cable 3,50m. long, section 3x1,5mm2. CEI 20-22.
In-line switch 8 Amp. 250V (16 Amp. 125V).
Available with dimmer in-line.(60-500W 230V AC, 50Hz)
Supplied with integral wire guard.
Weight 2,150 kg. (without accessories).
Accessories
Code
Code
Code
Code
1206:
1201:
1202:
1207:
30 gr. Wire guard.
280 gr. Four leaf barndoor + gel clips.
50 gr. Gel frame.
25 gr Double scrim.
Code
Code
Code
Code
Code
1208:
1209:
1210:
1203:
1205:
20 gr. Single scrim.
Halfsingle scrim
Halfdouble scrim
280 gr. Cone variable front diameter 30-50-70 mm.
50 gr. Table stand with 5/8" (16 mm.) spigot.
Code 106: Mini Pro Alu stand (Minipro 051N)
Code 301: Maxi Alu stand (compact 052)
Code 327: Gag grip with 5/8" (16mm) spigot
Photometrics
DISTANCE 5 m (2000w)
SPOT
FLOOD
CP81
CP82
CP81
CP82
light center value
2220
2860
490
998
beam angle= beam at 50% peak value
12°30'
15°30'
46°
44°
field angle= beam at 10% peak value
22°40'
27°40'
62°45'
58°40'
RATIO
1:4.5 (CP81) 1:2.87(CP82)
Fitting halogen lamps with GY9,5 base
SOLARIS 650 M.O.
code 1650
Specifications
Construction : steel and cast aluminum - Heat resistant matt black finish
Fresnel lens siam. 120mm - F85
Extra pure ploished aluminum reflector.
Lampholder GY9,5. Fitting halogen lamps 650w CP89 (3200°k).
Manual focus control.
Aluminum yoke with 16mm (5/8") spigot.
Flame retardant fire resistant power cable 3,50m long section 3x1mmq. HAR Titanex
In-line switch 8Amp. 250V.
Supplied with integral wire guard, gel frame and 4-leaf barndoor.
Weight 2,1 kg. (without accessories).
Compact size : high 180mm ; large 150mm ; wide 200mm.
Accessories
Code 1651: Four leaf rotating barndoor (supplied with lamphead)
Code 1652: Gel frame (supplied with lamphead)
Photometrics
DISTANCE 3 m
SPOT
FLOOD
light center value
8650
1250
beam angle= beam at 50% peak value
8°
47°
field angle= beam at 10% peak value
16°
60°
RATIO
Fitting halogen lamps with GY9,5 base
1:7
S O L A R I S 1 K W P. O . - M . O .
code 1800
Specifications
Construction: steel and cast aluminum. Heat resistant matt black finish.
Fresnel lens Ø 152 mm. - F 100 (or Ø 150 mm. - F 110).
Extra-pure polished aluminum reflector.
Lampholder G22 (Bi-post 22).
Fitting halogen lamps 650w CP68, 1000w CP71, 1200w CP93 (3200°k)
Manual or pole operated focus control.
Aluminum yoke with 29 mm. (1-1/8") spigot.
Power cable Titanex HAR H07 RN - section 3x1,5mmq.
4,0 m. long for M.O. , 3,0 m. long for P.O.
Switch 8Amp. 250V (16 Amp. 125V), mounted on-board.
Supplied with integral wire guard, gel frame and 4-leaf barndoor.
Weight M.O. 6,350 kg. - P.O. 8,050 kg. (without accessories).
Accessories
Code
Code
Code
Code
1801:
1802:
1804:
1805:
530 gr. (supplied with lamphead) Four leaf rotating barndoor.
130 gr. (supplied with lamphead) Gel frame.
Single scrim.
Double scrim.
Code 1806: Half single scrim.
Code 1807: Half double scrim.
Code 315: C clamp with 29mm socket
SOLARIS PO with built in Dimmer
CODE 1800 P.O.
The Solaris with built-in dimmer, features both the manual and DMX control.
This option offers many advantages, particularly in the installations with
fluorescent lighting. As a matter of fact it is no longer necessary to install
dimmer packs, saving on the installation and wiring costs. Solaris fresnel
allows to enhance the fill- lighting obtained by means of fluorescent soft
lights, adding shadows, depth and contrasts on the set.
Dimmer specification
Input voltage 220-240VAC/50-60Hz
Max current 6A
Min load 10W
Frequency of PWM 31kHz
Room temp. 5 - 40° C
EMC Emissions better than 67dB/uV (EN55011A)
Protocol DMX 512 - 1990
Weight 1,6 kg.
Dimensions 200x55x149 mm
Photometrics
DISTANCE 3 m
SPOT
FLOOD
light center value
12630
962
beam angle= beam at 50% peak value
6º
61º
field angle= beam at 10% peak value
12º
69º
RATIO
1:13,1
Fitting halogen lamps with G22 (Bi-post 22) base.
CODE 1800 M.O.
S O L A R I S 2 K W P. O . - M . O .
code 1850
Specifications
Construction: steel and cast aluminum. Heat resistant matt black finish.
Fresnel lens Ø 250 mm. - F 120
Extra-pure polished aluminum reflector.
Lampholder G38 (Bi-post 38).
Fitting halogen lamps 2000W CP41 (3200°k)
Manual focus control by rear knob.
Aluminum yoke with 29 mm. (1-1/8") spigot.
Power cable Titanex HAR H07 RN - section 3x2,5mmq
4,0 m. long for M.O. , 3,0 m. long for P.O.
Switch 10Amp. 250V (16 Amp. 125V), mounted on-board.
Supplied with integral wire guard, gel frame and 4-leaf barndoor.
Weight M.O. 11,600 kg. - P.O. 13,300 kg. (without accessories).
Accessories
Cod.
Cod.
Cod.
Cod.
1851:
1852:
1853:
1854:
580 gr. (supplied with lamphead) Four leaf rotating barndoor.
170 gr. (supplied with lamphead) Gel frame.
Single scrim.
Double scrim.
Cod. 1855: Half single scrim.
Cod. 1856: Half double scrim.
Cod. 315: C clamp with 29mm socket
CODE 1850 P.O.
Photometrics
DISTANCE 5 m
SPOT
FLOOD
light center value
13200
1065
beam angle= beam at 50% peak value
7°30'
58° 30'
field angle= beam at 10% peak value
31°
69° 40'
RATIO
1:12,4
Fitting halogen lamps with G38 (Bi-post 38) base.
CODE 1850 P.O.
C Y C LO R A M A / M I N I R A M A
code 1400
Specifications
Minirama fixtures are the ideal solution for lighting
evenly cycloramas and backgrounds.
Minirama can be used in a wide range of combinations
from single-cell unit up to 4-cell fixture, so as to may obtain
a more powerful illumination and more chromatic effects.
Minirama can be also used as groundrow unit.
Minirama cells fit 625W, 1000W and 1250W quartzhalogen bulbs, R7s based and 190mm long.
Construction: steel housing
Finish: Heat resistant matt black
Mirror: Soft-reflection aluminium finish
Lampholder:R7s
Stirrup: Manual and Pole operated
Power cable:CEI 20-22, 1 m long - section 3x1,5mmq
Weight: 3,2 kg. - single unit (M.O.); 6,3 kg. - single unit (P.O.)
Photometrics
MINIRAMA 1250W positioned downward (inclination 10°/11°) at 2,85m from a background high 7,5m,
offers an illumination range of 1000Lx (top) - 230Lx (ground).
Ideal distance of Miniramas in a downward row is 2,5m (centre-centre).
If positioned upward in the same conditions, the illumination ranges from 1150Lx (top) to 320Lx (ground).
Ideal distance of Miniramas in an upward row is 2m (centre-centre).
SOFTLIGHT 1250
code 420
Specifications
Construction: Pressed aluminium.
Black epoxy anti-scratch finish on outside;
High temperature matt white on inside.
Extra-pure polished aluminum reflector for each lamp;
Diffuser finish.
Lampholder R7s.
Fitting lamps 625w P2/10, 1000w P2/7 and 1250w P2/12 (3200°k)
Rotating lamp bar with tilt lock for a double usefor the luminaire as
a Soft (indirect) or Broad (direct) light source.
Aluminum yoke with 1-1/8" (29 mm.) spigot M.O. and P.O.
Cable lenght 4m. Section 3x1,5 mm2. Titanex
Supplied with integral wire guard for each lamp.
Independent switching for each lamp.
Weight M.O. 4,90 kgs. - P.O. 6,7 kgs.
Accessories
Cod. 421: 1,250 gr. Filter holder
Photometrics
DISTANCE 5 m (2500w - P2/10)
HORIZ. AXIS
VERT. AXIS
light center value
237
237
beam angle= beam at 50% peak value
88°
81°
field angle= beam at 10% peak value
140°
137°
Revolving bar
Fitting 1 halogen lamp with R7s base.
Switches panel
Pole operated
SOFTLIGHT 2500
code 410
Specifications
Construction: Pressed aluminum.
Black epoxy anti-scratch finish on outside;
High temperature matt white on inside.
Extra-pure polished aluminum reflector for each lamp;
Diffuser finish.
Lampholder R7s.
Fitting lamps 625w P2/10, 1000w P2/7 and 1250w P2/12 (3200°k)
Rotating lamp bar with tilt lock for a double usefor the luminaire as a Soft
(indirect) or Broad (direct) light source.
Aluminum yoke with 1-1/8" (29 mm.) spigot.
Cable lenght 4m. section 3x2,5 mmq Titanex
Supplied with integral wire guard for each lamp.
Independent switching for each lamp.
Weight M.O. 8,7 kgs. - P.O. 9,8 kgs.
Accessories
Cod. 411: 1,250 gr. Filter holder
Photometrics
DISTANCE 5 m (2500w - P2/10)
HORIZ. AXIS
VERT. AXIS
light center value
460
460
beam angle= beam at 50% peak value
104°
92°
field angle= beam at 10% peak value
151°
141°
Fitting 2 halogen lamp with R7s base.
Revolving bar
Switches panel
(Independent switching for each lamp.)
SOFTLIGHT 5000
code 400
Specifications
Construction: Pressed aluminium.
Black epoxy anti-scratch finish on outside.
High temperature matt white on inside.
Extra-pure polished aluminum reflector for each lamp.
Diffuser finish.
Lampholder R7s.
Fitting lamps 625w P2/10, 1000w P2/7 and 1250w P2/12 (3200°k).
Rotating lamp bar with tilt lock for a double use for the luminaire as a soft
(indirect) or Broad (direct) light source.
Aluminum yoke with 1-1/8" (29 mm.) spigot.
Cable lenght 4m. Section 3x6 mmq Titanex
Supplied with integral wire guard for each lamp.
Independent switching for each lamp.
Weight M.O. 11,4 kgs. P.O. 14,3 kgs
Accessories
Cod. 401: 1,250 gr. Filter holder
Photometrics
DISTANCE 5 m (2500w - P2/10)
HORIZ. AXIS
VERT. AXIS
light center value
660
660
beam angle= beam at 50% peak value
104°
107°
field angle= beam at 10% peak value
152°
170°
Fitting 4 halogen lamp with R7s base.
Revolving bar
Switches panel
(Independent switching for each lamp.)
Pole operated