Electric Vehicle Charging for Cities and Businesses

Electric Vehicle Charging for Cities and Businesses

Electric Vehicle Charging for Cities and Businesses
MCR16 Charger - All-in-One
MCR16
4 Wheels
Built to deliver normal charging in a smart,
compact design for electric vehicles or
hybrid electric plug-in vehicles.
Network interface; Ethernet and 3G.
Software API for applications integration and
management.
Normal Charging Features
Mode 3 charging Mennekes compliant.
Output 230 VAC 16 A / connector.
Till 2 independent connectors.
Other connectors may be implemented
according to customer requirements.
Built in Smart Meter.
User-friendly Keyboard and graphic interface.
RFID card reader.
Equipment and Charging Status indicators.
Integrated computer.
The Magnum Cap MCR16 is the perfect
solution for secure charging your vehicle in
modes 1, 2 and 3.
User-friendly touch keyboard and graphic
interface.
Graphical charging Status indication, including
elapsed time, energy consumption either in
price and kwh.
Applications
Outdoor street.
Indoor or Outdoor parks.
EV Service Workshops.
Floor mountable.
Innovative Technologies
for Electric Vehicles
Magnum Cap was created to simplify the usability of electric vehicles by developing safety reliable recharging
technologies and infrastructures. The company creates and develops charging solutions for a reliable, easy to
use and secure day to day use of battery based electric vehicles, by taking advantage of renewable energies
and preserving electric grid. A full charging product family is available, including four or two wheel charging solutions, Normal Charging, Home & Condominium Charging and Quick Charging systems.
Normal Charging Systems (All-in-one)
Depending on the EV it takes around 6 hours to charge 100% of EV battery. Either you can interrupt the charging cycle or let the system fulfill
your battery, finishing by itself.
With a light and appealing design, and total safety for the user and vehicle, they are recommended for indoor or outdoor parking lots and public
charging spaces. The system is also equipped with a communication
module that can be linked to common management and payment networks, via web services over IP, using Ethernet or 3G interface.
A graphic TFT screen display and intuitive menu-based interface
permits to the user having an immediate graphic perception of the
charging process and payment. Secure input data and control is
made using a numeric keypad and user access can be validated by
a contactless RFID cards reader.
MCR16 Technical Data
Application area
Public / semi-public charging
Indoor / outdoor
Electrical specifications
Rated input voltage/frequency
Rated input current
Cable section
Residual current protection
230 – 400 VAC / 50-60Hz
40A
3G10 mm2 –5G4 mm2
Residual current protective device 30 mA
Charging point 1
Rated output voltage/frequency
Outlet type
Charging mode
Charging current/output capacity
Line protection
Plug locking
230 VAC/50-60Hz
Outlet type IEC 62196-2
Mode 3 (1L-N-PE- 2 control signals)
16 A / 3.7kW
20 A
Electromechanical
Calibrated (1Wh resolution)
Charging point 2 (optional same to charging point 1)
Rated output voltage/frequency
Outlet type
Charging mode
Charging current/output capacity
Line protection
Plug locking
Energy metering
230 VAC/50-60Hz
Industrial Socket ( L1 – N – PE )
Mode 1 and 2
16 A / 3.7kW
20 A
Electromechanical
Calibrated (1Wh resolution)
Operating and display elements
Identification
Display elements
External lighting
RFID, high-frequency (Mifare / Calypso)
Display 7 inches (800 x 480
Numeric Keyboard touch
Led status ( red, green, blue )
Yes (Status indication)
Communication
Ethernet
Integrated GSM/GPRS modem
RFID (13,56 MHz)
WLAN
yes
optional
yes
On request
Dimensions
WxHxD
Weight
400 x 1690 x 230 mm
Approx. 50 Kg
Magnum Cap
Zona Industrial da Taboeira, Lote 2
3800-055 Aveiro
PORTUGAL
Phone: +351 234 248 100
Mobile: +351 935 994 988
www.magnumcap.com
MCR16.EN.V02 | Magnum Cap 2012 All Rights Reserved.
Datos técnicos MCR all-in-one
Ubicaciones de instalación
2 y 4 RUEDAS
Puntos de carga en espacios públicos,
o de acceso restringido
(Inmuebles, aparcamientos de hoteles,
centros comerciales, etc) cubiertos o al exterior.
Especificaciones eléctricas
Tensión de entrada/frecuencia
Corriente nominal
Sección de cable
Protección diferencial
Punto de Carga 1
Corriente de entrada nominal/frecuencia
Enchufe
Modo de carga
Corriente / potencia
Protección
Bloqueo del enchufe
Contador de energía
Punto de Carga 2 (opc. igual al punto 1)
Tensión/frecuencia
Enchufe
Modo de carga
Corriente / potencia
Protección
Bloqueo del enchufe
Contador de energía
Elementos de operación y de pantalla
Identificación
Iluminación externa
Elementos de pantalla
Comunicaciones
Ethernet
Módem GSM/GPRS Integrado
RFID(13,56 MHz)
WLAN
Dimensiones
LxAxE
Peso
230-400 VAC / 50-60Hz
40 A
3G10 mm2 - 5G4 mm2
30mA
230 VAC / 50-60Hz
Enchufe tipo 2 ICE 62196-2
Modo 3(L1-N-PE + 2 señales de control)
3,7 KW a 22 KW
20 A
Electromecánico
Calibrado (Resolución 1Wh)
230 VAC / 50-60Hz
Enchufe industrial (L1-N-PE)
Modo 1 y 2
16 A/ 3,7 KW
20 A
Electromecánico
Calibrado (Resolución 1Wh)
RFID (Mifare / Calypso)
Si (indicador de estado)
Pantalla 7 pulgadas (800 x 480)
Teclado numérico táctil capacitivo
Leds de estado (rojo, verde, azul)
Si
Opcional
Si
A través de petición
400 x 1690 x 230 mm
Aprox. 50 Kg