nitrothermspray
Transcripción
nitrothermspray
NITROTHERMSPRAY ® International & USA Patent - Method and equipment y r a n o i t Revolu Jet HERM T O R T I N ® ® ® NITROTHERMSPRAY SYSTEM ® 1. Mejor distensión, adhesión y mayor brillo. 2. No se forma “piel de naranja” efecto blistering. 3. Mínimo 30% de eliminación de descuelgue. 4. Reducción del tiempo de evaporización. 5. Reducción del abanico sobrante (overspray) y rebote de pintura 6. Eliminación de la humedad en la superficie de la pieza a pintar 7. 50% al 100% reducción del solvente 8. Control total de la aplicación y del ciclo productivo 9. Reducción del tiempo de aplicación 25 – 50% 10. Reducción de la presión de salida 11. Incremento mínimo de producción del 40% 12. Cambio de polaridad para promover la atracción El sistema NITROTHERMSPRAY de Eurosider Derivair ha revolucionado el pintado con pistola spray, un innovador método que ofrece alta calidad de acabado y real reducción de costes. Ambos, método y máquina tienen patentes internacionales. El sistema de Eurosider Derivair reemplaza el fluido tradicional por aire filtrado comprimido con una pureza superior al 99,5% en Nitrógeno, este es limpio, seco y ionizado. El nitrógeno es anhidro e inerte y puesto que el nitrógeno producido se puede ionizar, este sistema elimina los problemas asociados con la humedad y la electricidad estática. El nitrógeno extraído por medio de selectivas permeabilizaciónes, está también libre de impurezas tales como polvo, aceite, hidrocarburos y otros contaminantes químicos presentes en las conducciones de aire. Esto significa que la pintura no hace reacción ninguna con el fluido que pasa a través de la pistola o durante la aplicación. Los resultados obtenidos con aplicaciones con disolvente y disolventes al agua han sido revolucionarios. Debido a la temperatura del nitrógeno reducimos la viscosidad de la pintura y la necesidad de solvente. En pruebas recientes de solvente, se redujo mas del 50%. En ciertos productos alto sólido por ejemplo, el solvente se elimina totalmente, de esta manera es posible reducir el número de manos de pintura y barniz para cubrir la pieza a pintar. Esto hace el pintado mas fácil y ha sido probado que acelera el brillo, el tiempo de evaporización y en particular reduce el efecto overspray (parte del abanico que no se aprovecha) donde con la eliminación de la electricidad estática hace que la pintura vaya a la pieza y haya menos derroche, un ambiente de trabajo mas limpio y menos contaminantes la atmósfera. Con el NITROTHERMSPRAY cada mano de pintura es aplicada rápidamente y sin alterar las propiedades de la pintura. Polvo, descuelgues, corridos, “piel de naranja” o “hervidos” pasan a ser efectos del pasado. Este sistema puede ser usado con todo tipo de compresores de aire, pinturas, pistolas de spray para el pintado y en cualquier temperatura. Donde hay mas de una cabina de pintado, la distribución del nitrógeno se realiza usando nuestro sistema Top Spray. THE NITROTHERMSPRAY SYSTEM ® 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Improves quality of less skilled painters Higher DOI (Distinction of image) Controlled formation of orange peel Elimination of mottling Increases transfer efficiency Eliminates wait time between 1st and 2nd coats Decreases flash times Reduces overspray and rebounding paint Improves colour matching in solvent and water borne paints Removes surface moister 50 to 100% reduction of solvents 100% control of delivery Reduced application time by min. 25 - 50% Reduction of outlet pressure Minimum 40% increase in production Change of Polarity to promote attraction Reduces VOC’s emissions Allows the return of pure oxygen back to the environment Eliminates all the major uncontrollable variables in spray painting Extends life of booth filters and less booth maintenance The NITROTHERMSPRAY SYSTEM by Eurosider has revolutionized spray painting with an innovative method that offers high quality finishing and real savings in costs. Both method and machine have USA and international patents. The Eurosider system replaces the traditional fluid carrier of filtered compressed air with that of a nitrogen enriched one (up to 99,5%) that is clean, dry and ionized. Nitrogen is anhydrous, inert, and because the nitrogen produced is also ionized this system eliminates all problems associated with moisture and static electricity. The nitrogen extracted by means of selected permeation is also free from impurities such as dust, oil, oil fumes and other chemical contaminants present in the feed air. This means that the paint does not react in any way to the carrier as it passes through the spray gun or during application. The results had using both solvent and water borne have been revolutionary. By heating the nitrogen we reduce the viscosity of the paint and the need for solvents. In recent tests solvent were reduced up to 50%. In fact with certain products, high solids for example, solvents were eliminated all together making it possible to reduce the number of coats of paint and varnish. This makes paint spraying easier and has proved to be decisive in accelerating flash off and evaporation times and in particular in reducing the overspray effect, where with the elimination of static electricity the paint goes further, lays down flatter, and there is less waste, a cleaner working environment and fewer contaminants in the atmosphere. With Nitrothermspray each coat adheres to the surface being sprayed rapidly and without altering the properties of the paint. Sags, runs, drips and orange peel become a thing of the past. This system can be used with all kinds of air compressors, paints, spray guns and in all temperatures. Where there is more than one spraybooth the distribution of nitrogen is made simple by using our Top Spray system. Nitrothermspray - System • Static Elimination System Type Production Inlet air Bar/G PSI Nm3/h Cuft/h NitroThermSpray NTS-J-20 1600 PAM 1 7,5 10 13 108,8 145,0 188,6 11 17 23 388,5 600,4 812,2 NitroThermSpray NTS-J-40 1600 PAM 2 7,5 10 13 108,8 145,0 188,6 22 34 46 776,9 1.200,7 1.624,5 NitroThermSpray NTS-J-60 1600 PAM 3 7,5 10 13 108,8 145,0 188,6 33 51 68 1.165.4 1.801,1 2.401,4 NitroThermSpray NTS-J-80 1600 PAM 4 7,5 10 13 108,8 145,0 188,6 44 58 90 1.553,9 2.401,4 3.178.3 NitroThermSpray NTS-J-120 1600 PAM 6 7,5 10 13 108,8 145,0 188,6 66 100 140 2.330.8 3.531,5 4.944.1 Air compressor Nitrogen Pipeline Top Spray Stefano Frosolini creatività & comunicazione NTS-J ® Piazza Dante n°17 - 58100 Grosseto - Tel +39 (0)564 425117 - 416623 Fax +39 (0)564 418833 www.eurosider.com - www.derivair.com - Email: [email protected] Distributor: HAYDELL INDUSTRIES 163 Pellerin Road, LAFAYETTE, LA 70506, USA Tel.: 337-984-4993 Fax: 337-989-0307 Toll free: 1-800-877-4362 • Distributor inquiries: Email [email protected] www.haydell.com