AUTOMATIC CENTRE MANAGED BY PLC FOR PIECES
Transcripción
AUTOMATIC CENTRE MANAGED BY PLC FOR PIECES
CAT N. 26-B AUTOMATIC CENTRE MANAGED BY PLC FOR PIECES IDENTIFICATION AND SELECTION mod. MCS-A/EV LINEA AUTOMATIZADA CONTROLADA POR PLC PARA OPERACIONES DE RECONOCIMIENTO Y ALMACENAJE mod. MCS-A/EV The mechatronic system mod. MCS-A/EV is composed of the following elements:: • Trainer PLC with software mod. PLC-9/EV • Pushbutton panel mod. PULS/EV • Box for the tools and pieces to be worked mod. ATZ/EV. • Piece identification and distribution module mod. MCS-500/EV • Rotative store module mod. MCS-610/EV El sistema de mecatronica mod. MCS-A/EV se compone de los siguiente elementos: • Entrenador en PLC con software mod. PLC-9/EV • Panel de pulsadores mod. PULS/EV • Caja con las herramientas y las piezas a trabajar mod. ATZ/EV. • Modulo de distribucion de piezas i riconocimiento de materiales mod. MCS-500/EV • Modulo de almacen rotativo mod. MCS-610/EV Description Totally controlled by PLC, the working cycle is: • The piece is push out from the magazine to the testing area. • A micro switch detects the presence of the piece • The piece is material/colour recognized • The piece is pick up from the testing area • The piece is stored in three different columns, as it is just classified. Descripción El ciclo de trabajo, totalmente controlado por PLC, incluye: • La expulsión de la pieza del almacén cilíndrico al área de reconocimiento. • Reconocimiento de la presencia de la pieza en la área con un específico sensor. • Reconocimiento del material/color de la pieza. • Toma de la pieza desde la área de reconocimiento. • Almacenamiento de las piezas según los datos acumulados en las estaciones anteriores. Optional: Supervision software mod. SV/EV Air regulation set mod. SRA/EV Compressor mod. 3409A Table mod. TOP/EV Opcional: Software de supervisión mod. SV/EV Set de regulación del aire mod. SRA/EV Compresor mod. 3409A Mesa mod. TOP/EV Dimension and weight: 600x400x270 mm - 8 Kg. Dimensiones y peso: 600x400x270 mm - 8 Kg. Elettronica Veneta & IN.EL. S.p.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia,16 - Tel.+39 0422 7657 (r.a.) - Fax.+39 0422 860784 Export: Tel. +39 0422 765802- Fax +39 0422 861901- www.elettronicaveneta.com –E-mail: [email protected] CAT N. 26B AUTOMATIC LINE MANAGED BY PLC FOR PIECES ACKNOWLEDGEMENT OPERATIONS THICKNESS MEASUREMENT AND STORAGE mod. MCS-B/EV LINEA AUTOMATIZADA CONTROLADA POR PLC PARA OPERACIONES DE RECONOCIMIENTO PIEZAS, MEDIDA DEL ESPESOR Y ALMACENAJE mod. MCS-B/EV The mechatronic system mod. MCS-B/EV is composed of the following elements: • 2 trainers PLC with software mod. PLC-9/EV • 2 Pushbuttons panel mod. PULS/EV • Box for the tools and pieces to be worked mod. ATZ/EV. • Piece identification and distribution module mod. MCS-500/EV • Rotary manipulator module. MCS-510/EV • Module for measuring the thickness of pieces mod. MCS-520/EV. • Linear store module mod. MCS-530/EV El sistema de mecatronica mod. MCS-B/EV se compone de los siguiente elementos: • 2 entrenadores en PLC con software mod. PLC-9/EV • 2 Paneles de pulsadores mod. PULS/EV • Caja con las herramientas y las piezas a trabajar mod. ATZ/EV. • Modulo de distribucion de piezas i riconocimiento de materiales mod. MCS-500/EV • Modulo manipulator rotativo mod. MCS-510/EV • Modulo para la medida del espesor de piezas mod. MCS-520/EV • Modulo almacen mod. MCS-530/EV Description The working cycle, completely controlled by PLC, includes: • Piece ejection from the cylindrical store in the acknowledged area. • Acknowledgement of the piece presence in the area through the appropriate sensor. • Acknowledgement of the colour/material composing the piece detected by sensors (optic, inductive). • Piece transport through rotating manipulator to the subsequent station. • Acknowledgement of the piece thickness with selection on two slide ways of the suitable and rejected pieces. • Piece store complying with the data coming form the previous stations. Descripción El ciclo de trabajo, totalmente controlado por PLC, incluye: • La expulsión de la pieza del almacén cilíndrico al área de reconocimiento. • Reconocimiento de la presencia de la pieza en la área con un específico sensor. • Reconocimiento del color/material de la pieza mediante sensores (óptico, inductivo). • Transporte de la pieza mediante manipulador rotativo a la estación sucesiva. • Reconocimiento del espesor de la pieza con selección y envío a dos canales de las piezas aceptadas y los descartes. • Almacenamiento de las piezas según los datos acumulados en las estaciones anteriores. Optional: Supervision software mod. SV/EV Air regulation set mod. SRA/EV Compressor mod. 3409A Table mod. TOP/EV Opcional: Software de supervisión mod. SV/EV Set de regulación del aire mod. SRA/EV Compresor mod. 3409A Mesa mod. TOP/EV Dimension and weight: 1200x400x400 mm - 17 Kg. Dimensiones y peso:1200x400x400 mm - 17Kg Elettronica Veneta & IN.EL. S.p.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia,16 - Tel.+39 0422 7657 (r.a.) - Fax.+39 0422 860784 Export: Tel. +39 0422 765802- Fax +39 0422 861901- www.elettronicaveneta.com –E-mail: [email protected]