A Polystyrene Egg with Vivi Gade Fabric

A Polystyrene
Egg with Vivi
Gade Fabric
01
Inspiration: 12072
02
Measure the largest
circumference point around
the egg and divide into eight
areas.
03
Draw from the top to the
bottom through the eight
points. Use the tape measure
as a ruler.
04
Draw an arc at the top in each
of the eight divided areas.
Shift the next row. Draw the
arcs of the 3rd row inside the
division and change the
pattern like this.
A Polystyrene Egg with Vivi
Gade Fabric
07
05
Push the rest of the fabric into
the groove so it is not visible.
09
Cut into all the drawn arcs with
an art knife by pushing it into
the polystyrene.
06
A polystyrene egg covered with Vivi Gade fabric.
The grooves are cut with an art knife and the
pieces of fabric are pushed down into the
grooves.
Cut small pieces of fabric to
match the areas on the
polystyrene egg. Push the
fabric into the grooves with a
nail file.
08
Cut off excess fabric as close
as possible.
Glue a bead and a piece of
cord onto the bottom of the
egg and attach two beads with
a double piece of cord to form
a loop onto the top of the egg
and glue it in place.
Paint wooden beads with red
and off white Plus Color.
Cuter , l. 13 cm, 1ud
11602
Cuchillas de
recambio, 50ud
11604
Cuentas de
pl´satico, medidas
8 mm, medida
agujero 1,2 mm,
madre perla,
Redondo, 55gr,
230 ud
51083
Mini, High
Temperature, 1ud
39114
Barras de silicona,
dia: 7 mm, l. 10 cm,
25ud
39134
Barras de silicona,
dia: 7 mm, l. 10 mm,
200ud
39136
Huevos, A. 12 cm,
Poliestireno, 5ud
543231
Huevos, A. 12 cm,
Poliestireno, 25ud
54323
Tela de algodón,
medidas 45x45
cm, 140 gr/m2,
Copenhagen, 6ud
44153
Tela de algodón,
A: 145 cm, 140
gr/m2,
Copenhagen, 1ml
44045
Cotton Fabric, W:
145 cm, 140 g/m2,
Copenhagen, 10m
44144
Tela de algodón,
A: 145 cm, 140
gr/m2,
Copenhagen, 6x1m
44053
Cinta de satén, A:
3 mm,
blanquecino, 100m
51366