construction adhesive

ECON1536. 1 B
ECON1536. 2 B
ECON1536. 3 B
ECON1536. 4 B
ECON1536. 5 B
YELLOW
GREEN
BLUE
WHITE
BLACK
N1536-5ED
N1536-5ED
N1536-5ED
N1536-5ED
N1536-5ED
CONSTRUCTION ADHESIVE CONSTRUCTION ADHESIVE
8
98178 00100
0
PERFORMANCE
Designed for any size construciton job
CONSTRUCTION ADHESIVE
’
O VOC
ER
Z
The Strongest Adhesive for a Greener Earth
Eco-Bond Adhesives LLC. www.ecobondadhesives.com
For customer inquiries:
[email protected] or 1-800-ECO-8102
MADE IN THE USA
HECHO EN LOS USA
S
Directions: Prepare surfaces by cleaning them of dust, dirt, oil, or frost.
Bring product to at least room temperature and inset tube into standard
caulking gun. Cut nozzle at 45º angle to desired size. Puncture inner
seal. After applying Eco-Bond, materials may be repositioned for up to
20 minutes. Materials such as glass, metal and plastics will cure faster
if the surfaces are lightly misted with water. Paintable after tack free.
Works well with acrylic, latex and many oil based paints. When using
with oil based paints, test on a small area or use a latex primer.
Cleanup: Remove with dry cloth or a light solvent such as mineral
spirits. Caution: Uncured adhesive irritates eyes. In case of contact,
immediately flush with water for at least 25 minutes. Call a physician.
Avoid prolonged contact with skin. Keep out of reach of children.
Disclaimer: We do not guarantee that any hazards that we may mention
are the only hazards that exist. User is responsible to determine the
suitability of this product for the user’s intended application. User is
responsible for determining that he can meet all applicable health and
safety standards and regulation. We have no control over
transportation,storage, handling and use of our products and will not be
liable for any damages resulting from use.
Direcciones: Prepare las superficies limpiándolas de polvo, suciedad,
aceite o escarcha.Asegúrese que EcoBond esté al menos a temperatura
ambiente e inserte el cartucho em una pistola de calafatear de tamaño
normal. Corte la boquilla en un ángulo de 45º al tamaño deseado.
Perfore el sello interior.Después de aplicar Eco-Bond, los materiales se
reposicionaran porarriba de 20 minutos.
Materiales como vidrio, metal y plastico se curaran rapidamente si las
superficies estan ligeramente empañadas con agua. Se puede pintar si
al tocarse se siente seco. Trabaja bien con acrilico, latex y muchas de
las pinturas a base de aceite. Cuando se use con pinturas de aceite,
pruevelo en una pequeña area o use un latex primer.
Limpiar: Residuos adhesivos sin curar deberan removerse. Con un trapo
seco o un solvente suave.
Precaución: El adhesivo que no esté seco ed irritante en los ojos. En
caso de contacto, enjuáguese inmediatamente con agua por al menos
15 minutos. Llame a su médico. Evite contacto prolongado con la piel.
Mantenga fuera del alcance de los niños.
Limitación de Responsabilidad: Nosotros no garantizamos que ninguno
de los peligros que hemos mencionado sean los únicos peligros que
existan.El usuario eed responsable de determinar si este producto es
adecuado para su uso deseado. El usuario es responsable de asegurarse
que puede satisfacer todas las regulaciones de salud y seguridad.
Nosotros no poseemos control sobre transportación, almacenamiento,
manipulación y uso de hnuestros productos y no nos hacemos
responsable por ningún daño que ocurra por su uso.
Physical properties:
Basic Material: Proprietary Polymer Consistency: Paste
Color: White
Odor: None
VOC content: None
Isocyanate percentage: 0
Coverage: 32 lineal ft. using ¼” bead
Solvent percentage: None
Premium Grade
10.1 fl.oz. (304 ml)
Shear Strength 550 psi
Tensile Strength 600 psi
Permanently Elastic
Service Temperature -40 to 200
100% Elongation
Tack Free - 20 minutes
Moisture Curing
Approved for Indoor Use
Zero Shrinkage
ENVIRONMENTALLY SAFE
LEED Compliant
No VOC’s
Non-Toxic
Non-Petroleum Based
No Odor
Solvent and Isocyante Free
Meets all California Standards
Non-Flammable
BONDS & SEALS TO:
Wood - Metal - Foam
Drywall - Plaster
Windows - Skylights
Brick - Stone - Cement Board
Concrete, Masonry
Ceramic Tile - Ceiling Tile
Cove Base
Tub Surrounds - Fiberglass
Paneling - Wood decking
Compliances
ASTM 3498
HUD-UM 60 for Sub-floor Bonding
AFG-01
WARNING: Avoid contact with eyes and skin. Flush eyes with water for 15 minutes and get
medical attention immediately if irritation persists. Do not swallow. If swallowed, get
medical attention immediately. Avoid breathing vapors. KEEP OUT OF REACH OF
CHILDREN
Cuidado: Notoques con el piel ni los ojos. Pon aqua en los ojos por 15 minutos y llama un
doctor pronto si irritatión continua. No bebas. Si está bebida llama un doctor pronto. No
respires vahos.
GUARDA DE LOS NIÑOS.
Do not use on surfaces that come in direct contact with food.
PRINTER TO DROP IN CORREC T UPC CODE