Quotation Model A2 PET Blow Molding Machine
Transcripción
Quotation Model A2 PET Blow Molding Machine
`MIC Machinery Co., Ltd [email protected] Quotation Model A2 PET Blow Molding Machine Company market: Greece, Turkey, Germany, Sudan, Canada, America, Algeria, Nigeria, Albania, Saudi Arabia, Romania, Trinidad and Tobago, Chile, Venezuela, etc countries. Company certification: CE, ISO9001:2000, company staff: oversea service tech: 5people. `MIC Machinery Co., Ltd [email protected] Max volume of product 2L 1800-2000 bph (500ml) Actual machine picture Video link: http://v.youku.com/v_show/id_XODg0OTcwNzI4.html A2 bottle blowing machine Machine movement is chain system, a little different from this picture, `MIC Machinery Co., Ltd [email protected] Bottle process flow: `MIC Machinery Co., Ltd [email protected] `MIC Machinery Co., Ltd [email protected] Main Machine Máquina Principal Automatic Blow Molding Machine 12Kw High Pressure Air Compressor 13 Kw Lower pressure air compressor 7Kw Model Modelo Air tank 0.6m3/30kg Air Dryer 1Kw Air Filter MIC-A2 1.2m3/min 30Kg 1.2m3/min 10Kg Unit Price Precio por Unidad Quantity Cantidad Total Price Precio Total USD $16500 1 USD $16500 USD $2400 1 USD $2400 USD $1900 1 USD $1900 USD $1100 1 USD $1100 2.0m3/min 1 30Kg 2.0 m3/min 30Kg 2 USD $1250 Mould Water Chiller 2.5Kw 3HP USD $1300 1 USD $1300 Blow Mold(500ml) 2 cavities USD $1000 1 USD $1000 Free 1 Spare parts Machine total amount USD $ 25450 Optional Blow Mold(1000ml) 2 cavities USD $1000 1 USD $1000 Blow Mold(1500ml) 2 cavities USD $1000 1 USD $1000 Blow Mold(2000ml) 2 cavities USD $1500 1 USD $1500 `MIC Machinery Co., Ltd [email protected] Technical Parameter Parámetro Técnico 1. A1 Blow Molding Machine Soplador de Moldes 1A Machine General Information Productivity Productividad Machine Dimension Tamaño de Máquina Machine Weight Peso de Máquina 1800-2000 bph (500ml) Max 2000ml bottle 1500x1200x1800mm 1500kg Preform unscrambler Heater Weight Peso de Calentador 2000*950*2480mm 250kg Applicable Bottle Information Bottle Material Material de Botella Bottle body diameter Neck diameter PET Less than 100mm φ 20-45mm Height Blow pressure Less than 310mm 3.0Mpa EN MIC-A2 automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 102000ml. It is widely used to produce the pure water, mineral water, carbonated drink bottles, pesticide bottles, oil bottles cosmetics, wide-mouth bottles etc. Adopting double crank to adjust molds, heavily locking molds stable and fast, using infrared oven to heat the preforms. The preforms are rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blowing part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-automatic mode. The machine is small with low investment, easy and safe to operate. www.micmachinery.com `MIC Machinery Co., Ltd [email protected] Power Information Electrical Source Power Potencia de Fuente Eléctrica Power design Potencia 220V/380V 3Phase 50/60Hz 35kw Working power Mold Information Stretch stroke Max. Mold Thickness Max. Grosor de Molde Clamping force Fuerza de Apretamiento 360mm 200-250mm 220KN Mold Opening Stroke Carrera de Apertura HP air compressor Air Dryer 160mm 1.6M3/min 3.0Mpa 2.0M3/min 3.0Mpa Note: in the sufficient air supply, machine can be replace with different Neck diameter, the air cylinder can be change as your neck diameter. ES MIC-A2 soplador de moldeo automático es adecuado para la producción de envases y botellas de 10-2000ml de plástico PET. Es ampliamente utilizado para producir botellas para agua pura, agua mineral, bebidas carbonatadas, de plaguicidas, de aceite, de cosméticos, de boca ancha, etc. La adopción de doble manivela para ajustar el molde, bloqueando moldes estable y rápidamente, horno de infrarrojos para calentar preformas. Las preformas se giran y se calientan por igual. El sistema de aire se ha dividido en dos partes: la de acción neumática y la de soplado para satisfacer las diferentes necesidades de acción y de soplado. Puede proporcionar suficiente y constante presión alta para el soplado de botellas grandes de forma irregular. La máquina también está equipada con silenciador y sistema de engrase para lubricar la parte mecánica de la máquina. La máquina puede funcionar en el modo de paso a paso y el modo semiautomático . La máquina es pequeña, con baja inversión, fácil y seguro para operar. `MIC Machinery Co., Ltd [email protected] 2. HP Air Compressor Compresor de Aire HP Technic Parameters High pressure compressor Volume Pressure Speed 1.2M3 30kg 620R/min Power Machine Dimension Machine Weight 2*15kw 2000*1100*1600 480kg Volume Pressure Speed 1.0M3 10kg 960R/min Power Machine Dimension Machine Weight 15kw 1700*1100*1600 635kg Low pressure compressor `MIC Machinery Co., Ltd [email protected] 3. Mold Water Chiller Enfriador de Agua Note: Water chiller is use For cooling the bottle mould. Due to constantly blowing Mould will remain heat. Technic Parameters Cooling Capacity Capacidad de Enfriamiento Compressor Type Tipo de Compresor Compressor Power Potencia de Compresor 4.4 38oC 7580Kcal/h All-closed Vorticity 2.5kw Refrigerant Refrigerante Chilled Water Pump Power Potencia de Bomba de Agua Max. Flow Rate of Water Max. Caudal de Agua R22 0.75kw 55L/min 10oC Flow Water Pipe Tubería de Flujo Condensing Water Rate Condensación de Agua Water Tank Capacity Capacidad de Tanque 1´´ ≥36L/min 38L `MIC Machinery Co., Ltd [email protected] Machine Dimension Tamaño de Máquina Machine Weight Peso de Máquina 850x560x780mm 180kg `MIC Machinery Co., Ltd [email protected] 4. Air Cooling Dryer Secador de Aire Technic Parameters Flow Capacity Capacidad de Flujo Working Pressure Presión de Trabajo Inlet Temperature Temperatura de Entrada 1.0 m3/min 3.0 Mpa ≤80oC Dew Point Punto de Rocío Ambient Temperature Temperatura de Ambiente Power Supply Alimentación Eléctrica 23oC ≤38oC 220V/50Hz Compressor Power Potencia de Compresor Machine Dimension Tamaño de Máquina Machine Weight Peso de Máquina 1.0KW 1050x650x1100mm 180kg `MIC Machinery Co., Ltd [email protected] 5. Air Storage Tank Tanque de Almacenamiento de Aire Technic Parameters 0.6M3/3.0Mpa Volume Capacidad de Flujo Pressure Designed Presión de Trabajo Designed Temperature Temperatura de Entrada 0.6 m3 3.0 Mpa 100oC Test Pressure Presión de Prueba Machine Dimension Tamaño de Máquina Machine Weight Peso de Máquina 4.13 Mpa 1200x1100x1650mm 400kg `MIC Machinery Co., Ltd [email protected] 6. Air Filter Filtro de Aire Technic Parameters Flow Capacity Capacidad de Flujo Pressure Designed Presión de Trabajo Designed Temperature Temperatura de Entrada 2.0 m3 3.0 Mpa ≤50oC Machine Dimension Tamaño de Máquina Machine Weight Peso de Máquina 350x350x750mm 20kg `MIC Machinery Co., Ltd [email protected] Setup list Component Brand Original Pneumatic components AIRTAC TAIWAN Turning cylinder FESTO GERMANY High pressure air valve PAPK USA Low pressure air valve PMC KOREA PLC controller AELTA TAIWAN Computer screen AELTA TAIWAN High pressure muffler SMC JAPAN Oil water separator AIRTAC TAIWAN Photo cell AUTONICS KOREA Switching power WM TAIWAN Circuit breaker CHINT Air switch TAIAN TAIWAN Relay IDEC JAPAN Finger cylinder FESTO GERMANY `MIC Machinery Co., Ltd [email protected] Spare parts Component Model Quantity Stretch cylinder seals 63*20-40*420 1set Spanner 68-72 1set Lamp (advise store some) 860*220v*1000w 10pieces Tool box / 1set Inner hexagon spanner 1-12mm 1set Outter hexagon spanner 4-22mm 1set High pressure air valve 1/2 dia*24v*35mpa 1piece High pressure air valve 1/8 dia*24v*9mpa 2pieces Proximity switch 8mm 2pieces Magnetic switch CS-J/G/S 6pieces Midget relay G2R-212S-V-N-US 4pieces Stretch cylinder seal 24-57mm 5pieces Stretch cylinder seal 12mm 5pieces Temperature control module / 1piece `MIC Machinery Co., Ltd [email protected] Spare parts Component Model Quantity Regulator 48-48mm 1piece Bearing outlet bottle robot 20mm 1piece Bearing 30mm 1piece Standard mounts / 1set Perform holder 30mm 60piece Bearing / 5pieces Gear / 2pieces Retainer / 5pieces Pipe joints for cylinder M5----6MM 2pieces Pipe joints for chiller 1/4-----10MM 5pieces Pipe joints for robot 6mm/8mm/10mm 2pieces High pressure tubing 6MM 2pieces PEFE tape / 2box Phillip screwdriver / 1set `MIC Machinery Co., Ltd [email protected] Spare parts Component Model Quantity Slot type screwdriver / 1set High pressure reducer valve 1/2 Dia*24v*35mpa 1piece Pipe joints 1/2---12mm 2pieces Pipe joints 1/2----8mm 2piece Pipe joints 1/2---8mm 4pieces `MIC Machinery Co., Ltd [email protected] Thank you for attention. Lewis Liu [email protected] +86-13083991987 Skype: lewis_liu6 Company address: Room 803 Oujiang building No.6 street XiaSha techzone Hangzhou, China (office) No.182 Xue Cheng Road, XueYan Town, Wujin zone, Changzhou, JiangSu, China (Factory) Kangqiang Road, North industry area. Huangyan, Zhejiang,China (Factory) `MIC Machinery Co., Ltd [email protected] Terms & Conditions: Payment: T/T 30% in advance, balance paid before shipment. Delivery: 35-40 days after receiving the deposit and confirm the bottle shape Packing: wooden case Validity: 3months Sales After Service: Guaranty: one Year One set of consumable accessories will be provided with the machine. Before delivery, we will adjust the machine to fit for your product. Any question, you can mail/call us at any time. And our most experienced engineers are assigned to give consulting service, and always available for dispatching abroad. All spare parts are always available for delivery. Manual is in English. Installation/ Training: The installation can be provided by the MIC Company. It must be after shipment and machine has arrived and factory must be ready equipped with all necessary requirements before booking installation with MIC company. Our engineers will come to the site for the complete and final installation. During the installation session, a one day training course will be provided to the customer to the customer for operation and maintenance procedure. The purchase at US$80/person/day plus all local transportation, accommodation, air tickets (round trip). Day charges include travel days.
Documentos relacionados
Quotation Blow Molding Machine Model A4 bottle MIC Machinery
containers and bottles in any shape. It is widely used to produce carbonated bottles, mineral water bottles, pesticide bottles, oil bottles, cosmetic bottles etc. * Stable performance with advanced...
Más detalles