Filter Products for the Automotive IndustryProducts for the
Transcripción
Filter Products for the Automotive IndustryProducts for the
Products for the Automotive Industry Modern automotive systems depend on precise and efficient filters to achieve maximum performance. Sefar offers open mesh, closed mesh and depth filter material for various applications. Product Features ISO/TS 16949 Automotive Sefar's manufacturing system is geared towards providing lot-to-lot repeatability for critical parameters. This consistent quality allows automotive injection molders and filter element manufacturers to easily incorporate Sefar products into their manufacturing processes. Injection filters DOWNLOADS Highly precise and reliable screens down to a Brochure: Automotive (PDF 2868 kb) few microns Excellent resistance to corrosion by fuel and Certificate: ISO TS 16949 (PDF 638 kb) other automotive fluids Customer Info: SEFAR ACCUFLOW2 (PDF 469 kb) High flow capacity SEFAR NITEX fabrics range Customer Info: SEFAR PEEKTEX Automotive (PDF 611 kb) Fuel pump filters High mechanical and chemical stability Good filtering performance Low shedding construction and high strength Wide range of SEFAR TETEX MONO fabrics or SEFAR ACCUFLOW depth filter media Filters for hydraulic systems Sefar Maissa S.A.U. Avda. del Vallés, 59-61 Poligono Industrial Sud Sector P-2 08440 Cardedeu (Barcelona) Phone +34 93 844 47 10 Fax +34 93 844 47 20 [email protected] Go to product p For hydraulic brake filters, transmission filters, power steering filters and hydraulic cartridge systems: Highly precise screening performance in hydraulic fluids Good thermal stability in hydraulic fluids Broad range of SEFAR TETEX MONO and SEFAR PETEX fabrics Transmission filter Suction and pressure filters are manufactured using our open mesh fabrics combined with a wide range of depth media, providing the ultimate in filtration protection. Filter solution for suction and pressure side Combination of depth filtration media with surface fabric filter media Stamped elements, pleated elements, multi-layer construction Filters for the water system We provide products that can be used for windshield wipers and water reservoirs: Precise mesh openings Non-shedding construction Self-cleaning filtering media Wide range of SEFAR NITEX, SEFAR TETEX, SEFAR PROPYLTEX fabrics SCR (Selective Catalytic Reduction) The SCR application involves a system whereby an urea solution (AdBlue) is sprayed into the exhaust stream to reduce the NOx level. Ultrasonically stamped elements Pleated elements Fabrication capability solutions Sefar Maissa S.A.U. Avda. del Vallés, 59-61 Poligono Industrial Sud Sector P-2 08440 Cardedeu (Barcelona) Phone +34 93 844 47 10 Fax +34 93 844 47 20 [email protected] Go to product p Diesel conditioning systems Sefar developed a multi-layer media and specialty coated open mesh filter for diesel fuel systems in order to protect the injection system. Sefar monofilament open mesh for water separation SEFAR ACCUFLOW depth media for coalescing Special hydrophobic treatment In-house media testing (according to ISO 16332) Material features Inherent to our synthetic materials are: Good fatigue properties compared to metal mesh Easy to handle and no sharp edges High strength and tear resistance Non-shedding properties Open mesh fabric Closed mesh fabric Depth filter material High precision and Highly efficient Highly efficient reliable mesh particle retention particle retention opening High throughput Low pressure drop Low pressure drop Excellent surface Resistant to Various surface properties corrosion caused by modifications fuels and blends available Maximized filtration High performance area polymers for State-of-the-art Sefar Maissa S.A.U. Avda. del Vallés, 59-61 Poligono Industrial Sud Sector P-2 08440 Cardedeu (Barcelona) Phone +34 93 844 47 10 Fax +34 93 844 47 20 [email protected] Go to product p extreme and harsh bonding technology conditions Additional information on our fabrication capabilities can be found by following the links below: Pleated Elements Ribbons Tape and Dispenser products Tubes Shapes / Stamped pieces Your Benefits Inherent material properties Good replacement for metal filters (thermal and chemical resistance) Easily molded (handling properties of synthetic fiber vs. wire) Consistent quality (ISO TS 16949) Useable in extreme temperature ranges and chemically aggressive environments (PEEK fabrics) Variety of conversion configurations Open mesh fabrics Exact and repeatable screening properties (high precision mesh opening) High flow rates (low pressure drop, maximized open area by use of fiber down to 24µm) Adjustable hydrophobic levels, ranging from 100- to 135-degree contact angle (surface modification) Maximum technical flexibility (materials, diameters and weaving patterns) Closed mesh fabrics Sefar Maissa S.A.U. Avda. del Vallés, 59-61 Poligono Industrial Sud Sector P-2 08440 Cardedeu (Barcelona) Phone +34 93 844 47 10 Fax +34 93 844 47 20 [email protected] Go to product p Highly efficient particle retention (closed mesh) Optimized flowrates Cleanliness (smooth surface) Depth filter material Lower power consumption and minimal space requirement (low pressure drop) Protection of pump systems (high particle retention capacity) Useable for all fuels and most liquids (elevated temperature fuel tests) Excellent bonding uniformity (latest ultrasonic bonding technology) Depth filter material for high capacity (60 µm material) applications Depth filter material for high efficiency (30 µm material) applications Proven test results for flat or converted materials (external approved test labs) Available as rollgoods or ribbons for injection molders Sefar Maissa S.A.U. Avda. del Vallés, 59-61 Poligono Industrial Sud Sector P-2 08440 Cardedeu (Barcelona) Phone +34 93 844 47 10 Fax +34 93 844 47 20 [email protected] Go to product p