CTM - 105 M - Talleres Carod SL

Marine Generator Set
- 105 M
CTM - 105 MCTM
(Marine)
POWER OUTPUT: 105
Carod reserves the right to change product specifications, designs and equipment, anytime, without notice and without incurring obligation. Image displayed may be an example. The product can vary. In case of queries, please contact Talleres Carod S.L. - Technical Office.
kVA
50 Hz – 1.500 r.p.m.
THREE-PHASE – 400V
WATER COOLED
DIESEL
OPEN GENSET
MOUNTING BASEFRAME
Electrically welded frame, made in folded steel sheet, painted with phosphated, priming and
powder coating, which guarantees a great endurance in environments with high dampness,
aggressive atmospheres and presence of the most common pollutants. fitted on ohmegashaped legs for supporting and hoisting. Silentblocks to isolate linear vibration of the generatorengine pack.
ENGINE
MWM-INTERNATIONAL marinized engine, 4 strokes, diesel fuelled, mechanically governed,
liquid cooled with heat exchanger, regulated at 1.500 r.p.m., with BOSCH mechanical injection
system.
AIR INTAKE
Dry type air filter. Special for dustless environments.
COOLING SYSTEM
Indirect cooling. Jabso seawater pump. Seawater-coolant heat exchanger.
EXHAUST
Wet exhaust stainless steel manifold. Jabso seawater pump. Mufflerless.
ALTERNATOR
Marinized and oversized brushless alternator. IP23 with additional protection screen, self
excited, 4 poles, with ±1,5% voltage accuracy at constant load. At any power factor with speed
variation of 5% to 30% from its rated speed.
ELECTRICAL PANELBOARD
With engine protection and remote control. Equipped with coolant temperature and oil pressure
indicators. Controller with parameters, configurations and alarms indication on display.
Power circuit and fuel supply installation will be performed by the Customer.
Talleres Carod S.L.
COD – 925855ENG
Pol. Ind. PITARCO II Parc. Nº23
50450 MUEL (Zaragoza)-España
: +34 976 140 800
FAX: +34 976 140 888
www.carod.es
Página 1 de 4
Carod reserves the right to change product specifications, designs and equipment, anytime, without notice and without incurring obligation. Image displayed may be an example. The product can vary. In case of queries, please contact Talleres Carod S.L. - Technical Office.
CTM - 105 M (Marine)
ENGINE DATA SHEET
Manufacturer’s brand
Model
Max power
Power data according to standards
Rated speed
Total displacement
Number of cilindres
Bore x Stroke
Compression ratio
COOLING SYSTEM
Cooling type
Seawater pump flow
Seawater-coolant heat exchanger construction
Normal operating temperature
Max. Operating temperature
Engine block coolant volume
Whole system coolant volume
Engine surfaces irradiated heat
Coolant irradiated heat
AIR INTAKE SYSTEM
Air intake type
Air filter type
Air intake max. flow (air 1,2 kg/m3)
Heat exchanger charge air / water (Intercooler)
Aftercooler irradiated heat
LUBRICATION SYSTEM
Max oil quantity including filter
Minimum oil specs
Factory fill oil viscosity (SAE)
FUEL SYSTEM
Governor and injectiion type
Specific fuel consumption
Specific fuel consumption (0,82g/ml diesel)
Fuel consumption at 100% of load
Fuel consumption at 75% of load
Fuel consumption at 50% of load
EXHAUST SYSTEM
Exhaust gas max. temperature
Exhaust gas flow
Max. back pressure exhaust gases
Exhaust gases irradiated heat
ELECTRICAL SYSTEM
Battery charging system
Batteries specs
CV/kW
r.p.m.
Liters
mm
l/min
°C
°C
liters
liters
kcal/min
kcal/min
m3/min
kcal/min
liters
Indirect – Heat exchanger
Consult
Brass pipes
80/90
100
9
34
206,63
1115,78
Turbo+Aftercooled
Dustless environments
11,7
Yes
289,275
19
API - CE / CCMC D5 - ACEA E2
15W40
g/cv.h
l/kW.*h
l/h
l/h
l/h
Mechanical
145,00
0,13
16,22
12,17
8,11
ºC
m3/min
mm H2O
kcal/min
700,00
43,88
1.000,00
1.115,78
V/Amperes CCA
Alternator
12/900
Talleres Carod S.L.
COD – 925855ENG
MWM
6.10 TCW
218 / 160
DIN6271
1.500
6,45
6 in line
103 x 129
17,8:1
Pol. Ind. PITARCO II Parc. Nº23
50450 MUEL (Zaragoza)-España
: +34 976 140 800
FAX: +34 976 140 888
www.carod.es
Página 2 de 4
Carod reserves the right to change product specifications, designs and equipment, anytime, without notice and without incurring obligation. Image displayed may be an example. The product can vary. In case of queries, please contact Talleres Carod S.L. - Technical Office.
CTM - 105 M (Marine)
ALTERNATOR DATA SHEET
Manufacturer’s brand
Model
Frequency
Rated voltage
Connection type
Nº of phases
Nº of poles
Power ^T= 125 °C, 40ºC PRIME
Power factor
Isolation Class / ^Temp
Protection grade
Short circuit current (for 20seg)
Voltage regulator
Units
CONSULT
Hz
V
kVA
MECCALTE
ECP34-1L/4
50
400
Star - Series
3
4
130
0,8
H/H
IP21
3 In
Electronico-AVR
Advice note: Manufacturer and model are default values. They may vary depending on disponibility, always with similar
specs.
GEN SET CONTROLLER DATA SHEET
Model
VALUES DISPLAYED ON SCREEN
Generator voltage
Frequency.
Battery voltage
Gen set operating hours
INFO DISPLAYED ON SCREEN
Maintenance reminder
Auto/Manual operating mode
Parameters settings and times programmation
Alarms
ALARMS
Starting fault (Shutdown)
Low oil pressure (Shutdown)
Water high temperature (Shutdown)
Overspeed (Shutdown)
Emergency shutdown mushroom activated (Shutdown)
Generator voltage out of range (Shutdown)
Generator frequency out of range (Shutdown)
Low fuel level (Warning)
Starting fault (Shutdown)
Low battery voltage. (Warning)
Optional Alarm (Warning/Shutdown)
Talleres Carod S.L.
COD – 925855ENG
Pol. Ind. PITARCO II Parc. Nº23
50450 MUEL (Zaragoza)-España
SAM713
: +34 976 140 800
FAX: +34 976 140 888
www.carod.es
Página 3 de 4
CTM - 105 M (Marine)
Carod reserves the right to change product specifications, designs and equipment, anytime, without notice and without incurring obligation. Image displayed may be an example. The product can vary. In case of queries, please contact Talleres Carod S.L. - Technical Office.
CONTROL, PROTECTION AND INDICATION IN ELECTRICAL PANELBOARD
Oil pressure indicator
Included
Coolant temperature indicator
Included
Emergency shutdown mushroom pushbutton
Included
LOGISTICAL DATA
Approximate weight with coolant and oil
Volume of fuel in tank
kg
liters
Consult
Not included
MEASUREMENTS
1.480* mm
995* mm
2.600* mm
*Approximated measurements. Please, enquire Carod-Oficina Técnica for actual data.
For any other option of equipment and configuration: Consult manufacturer.
Talleres Carod S.L.
COD – 925855ENG
Pol. Ind. PITARCO II Parc. Nº23
50450 MUEL (Zaragoza)-España
: +34 976 140 800
FAX: +34 976 140 888
www.carod.es
Página 4 de 4