Mixing XXIII program

PROGRAM
Sunday, June 17th
Time
9:00 am- 2:00 pm
2:30- 5:30 pm
5:30- 6:30 pm
6:30- 7:30 pm
Event
Short Course: “Mixing Fundamentals and Applications”
(see program separately)
Location
Maya Room
Convention Center
Registration
Welcome Cocktail
Welcome Dinner
Lobby Paraiso Beach
Kiosk, Shopping Center
Restaurante Buffet “El Mercado”
Convention Center, “Quintana Roo” Room
7:30 pm
Welcome and Opening Comments from Conference Chair
Enrique Galindo, Instituto de Biotecnología, UNAM, México
Session 1: Novel Experimental Methods in Mixing
Chairs: Piero Armenante, New Jersey Institute of Technology, USA.
Guiren Wang, University of South Carolina, USA.
Mixing of Conducting Fluids by Electromagnetic Forces: Experimental Methods, Numerical Simulations
and Perspectives
7:45 pm
1
2
3
3
1
Sergio Cuevas (speaker), Aldo Figueroa, Patrice Meunier, Emmanuel Villermaux, Michel Rivero,
(plenary)
1
1
2
Eduardo Ramos, Centro de Investigación en Energía, UNAM, México, Facultad de Ciencias, Universidad
3
Autónoma del Estado de Morelos, México; IRPHE, CNRS, Aix-Marseille Université, France
A Method for Comparing Impellers´ Generation of Turbulence and Flow
1
2
1
2
8:30 pm
Richard K. Grenville (speaker), David A. R. Brown, Richard K. Grenville, USA; BHR Group Ltd., Cranfield,
UK
Applications of Electrical Resistance Tomography to Optimization and Control of Mixing
8:55 pm
Ken Primrose, Industrial Tomography Systems plc, Manchester, UK
9:20 pm
Coffee Break and Exhibit (Foyer, Convention Center)
Micromixing Studies Employing the Iodide-Iodate Reaction Scheme and Interpretation of Such Results
1
1
1
2
2
1
Julia Hofinger (speaker), Waldemar Bujalski, Serafim Bakalis, Archie Eaglesham, Melissa Assirelli, Alvin
9:40 pm
1
2
W. Nienow, School of Chemical Engineering, University of Birmingham, UK; Huntsman Polyurethanes,
Brussels, Belgium
On the Use of Bubble Image Velocimetry (BIV) to Measure Hydrodynamics within a Tubular Membrane
System
10:05 pm
César Gutiérrez-Valencia (speaker), Alexandra Cerón-Vivas, Adalberto Noyola-Robles, Adrián Pedrozo
Acuña, Instituto de Ingeniería, UNAM, Mexico City, México
10:30 Social Hour and Exhibit (Foyer, Convention Center)
11:30 pm
Monday, June 18th
Session 2: The Most Influential Authors and Contributions to Fluid Mixing Technology and the
Young Generation
Chairs: Victor Atiemo-Obeng, Retiree from The Dow Chemical Company, USA.
Justin Walker, University of Maryland, USA.
Breakfast
7:00 -8:00
am
(Restaurante Buffet “La Plaza”)
The 21 Most Influential Contributions to Fluid Mixing Technology
1
2
3
1
Minye Liu (speaker), Suzanne M. Kresta (speaker) and Richard, V. Calabrese (speaker), DuPont
8:00 am
2
3
(plenary)
Engineering, Wilmington, USA; University of Alberta, Edmonton, Canada; University of Maryland, College
Park, USA
Spatial Distribution of Energy Dissipation Rates in the Vicinity of a Rushton Impeller
9:00 am
Harry E.A. Van den Akker (speaker), Jurriaan J.J. Gillissen, Department of Multi-Scale Physics, Delft
University of Technology, Netherlands
Scale-down Studies for Assessing the Impact of Different Stress Parameters on Growth and Productivity
during Mammalian Cell Culture
1,2
1
3
4
5
5,6
Will H. Scott, Colin R. Thomas, Chris J. Hewitt, Gareth Lewis, Steve Meier, Ashraf Amanullah,
5
1,3
1
9:30 am
Robert Kiss, Alvin W. Nienow (speaker), Centre for Bioprocess Engineering, University of Birmingham,
2
3
UK; now at Lonza Biologics plc, Slough, UK; Centre for Biological Engineering, Loughborough University,
4
5
UK; MedImmune Cell Sciences, Cambridge, UK; Genentech, A Member of the Roche Group, South San
6
Francisco, USA; now at Gilead, Inc., USA
Micromixing Effects in Two-phase Systems
10:00 am
Jerzy Bałdyga (speaker), Magdalena Jasińska, Katarzyna Malik, Warsaw University of Technology, Faculty of
Chemical and Process Engineering, Warsaw, Poland
Particle-resolved Simulations of Solids Suspension in a Small Mixing Tank
10:30 am
Jos Derksen, Chemical & Materials Engineering, University of Alberta, Edmonton, Canada
11:00 am
Coffee Break and Exhibit (Foyer, Convention Center)
NAMF Student Award Finalist
Power Consumption of Radial-Discharge Turbine Agitators in Continuous Operation
11:30 am
1
1
2
3
1
2
Mark Heimovitz (speaker), Kevin Myers, Eric Janz, Julian Fasano, University of Dayton, Chemineer,
3
Inc., Mixer Engineering Inc., USA
NAMF Student Award Finalist
Viscous Structures Produced under Turbulent Conditions in a Stirred Tank
1,3
2
1
1
11:55 am
René Sanjuan-Galindo (speaker), Roberto Zenit, Gabriel Ascanio, Centro de Ciencias Aplicadas y
2
3
Desarrollo Tecnológico, UNAM; Instituto de Investigaciones en Materiales, UNAM; Current address:
Instituto Tecnológico de Nuevo León, México
NAMF Student Award Finalist
12:20 pm
Dilute Dispersion of Water into Oil in a Batch Rotor-Stator Mixer
Paul E. Rueger (speaker), Richard V. Calabrese, University of Maryland, College Park, USA
Winner of the South American Mixing Student Competition
Experimental Power Number of High Shear Disk Impellers
12:45 pm
Edimilson Souza (speaker), José Roberto Nunhez, Universidade Estadual de Campinas – UNICAMP,
Faculdade de Engenharia Química, Departamento de Engenharia de Processos, Campinas, Brazil
Lunch
1:10- 2:10
pm
(Restaurante Buffet “El Mercado”)
5:30- 6:00
pm
6:30- 7:30
pm
Social Hour
(Lobby Bar “La Cúpula”)
Dinner
(Restaurante Buffet “El Mercado”)
Session 3: CFD of Mixing Processes
Chairs: Roberto Nunhez, Universidade Estadual de Campinas, Brazil.
Kent Wardle, Argonne National Laboratory, USA.
CFD Prediction of Gas-liquid Flow in an Aerated Stirred Vessel Using the Population Balance Model
7:30 pm
Zbynĕk Kálal (speaker), Milan Jahoda, Institute of Chemical Technology, Prague, Czech Republic
CFD Simulations for Scale up of Wet Milling in High Shear Mixers
7:55 pm
Meng Yang, Richard V. Calabrese (speaker), University of Maryland, College Park, USA
CFD Analysis and Testing of Magnetic Capture of Rare Cells from Whole Blood
1
2
1
1
8:20 pm
Zhixi Qian, Paul W. Todd, Thomas R. Hanley (speaker), Department of Chemical Engineering, Auburn
2
University, Auburn, Techshot, Inc., Greenville, USA.
8:45 pm
Coffee Break and Exhibit (Foyer, Convention Center)
A Combination of Population Balance and Kinetic Models for Bioreactors Scale-up Using CFD
1,2,3
1,2,3
1,2,3
1
9:05 pm
Jérôme Morchain (speaker),
Jean-Christohe Gabelle,
Arnaud Cockx, Université de Toulouse,
2
3
France, INRA, France, CNRS, France
CFD Simulation of Gas Mixing in Anaerobic Bioreactors
9:30 pm
Binxin Wu, Philadelphia Mixing Solutions Ltd, Palmyra, USA
Computational Fluid Dynamics (CFD) for Analyzing Mixing in a Prototype Column Digester
1
1
1,3
2
3
3
Jorge Flores , Abraham Rojano (speaker), Teodoro Espinosa, Enrique Mejia , Max Domaschko, Ulises
9:55 pm
1
2
3
Toledo, Universidad de Chapingo, México; Colegio de Postgraduados, México; West Virginia State
University, USA
10.20Social Hour and Exhibit (Foyer, Convention Center)
11:30 pm
Tuesday, June 19th
Session 4: Mixing of Multiphase Systems
Chairs: Larry Tavlarides, Syracuse University, USA.
Carlos Rubio, Universidad Autónoma de Yucatán, México.
Breakfast
7:00- 8:00
am
(Restaurante Buffet “La Plaza”)
Quadrature-based Moment Methods for the Simulation of Fluid-fluid Multiphase Systems
8:00 am
Daniele L. Marchisio, Dipartimento di Scienza Applicata e Tecnologia, Istituto di Ingegneria Chimica,
(plenary)
Politecnico di Torino, Italy
Numerical and Experimental Flow around a Flat Disk for Multiphase Flow
1
2
2
3
1
1
Jorge Ramírez-Cruz, Ma. Soledad Córdova, Gabriel Ascanio, Roberto Zenit, William Vicente, Martín
8:45 am
2
1
2
Salinas-Vázquez, Enrique Soto (speaker), Instituto de Ingeniería, Centro de Ciencias Aplicadas y
3
Desarrollo Tecnológico, Instituto de Materiales, UNAM, Mexico City, México
Hybrid Multiphase CFD Simulations for Coupled Dispersed/Segregated Flows in Liquid-liquid Extraction
9:10 am
Kent E. Wardle, Argonne National Laboratory, Argonne, USA
9:35 am
Coffee Break and Exhibit (Foyer, Convention Center)
Characterization of the Traditional Mexican “Molinillo” used in the Mixing Process of Chocolate Beverage
Preparation
9:55 am
Alhelí Holguín, Diana López, Gabriel Corkidi, Enrique Galindo (speaker), Instituto de Biotecnología, UNAM,
Cuernavaca, México
Power Drawn, Mass Transfer Correlations and Mixing Time in Vessels Stirred with Multiple Radial and Axial
Down-pumping Impellers
10:20 am
Marco Ávila-López, Sergio Uitzil-Álvarez, Dalmira Rodríguez-Martin, Daniel Mena-Romero, Carlos RubioAtoche, (speaker), Universidad Autónoma de Yucatán, Mérida, México
10:45 am
Coffee Break and Exhibit (Foyer, Convention Center)
Session 5: Fundamentals of Mixing
Chairs: Jerzy Baldyga, Warsaw University of Technology, Poland.
Robert Brodkey, Ohio State University, USA.
Mixing and Microstructure of Suspensions in Inertial-free Complex Flows
11:15 am
Bu Xu, Tharanga Perera, James Gilchrist (speaker), Department of Chemical Engineering, Lehigh University,
Bethlehem, USA
Topological Analysis of a Mixing Flow Generated by Natural Convection
1
2
1
2
11:40 am
Luis M. de la Cruz (speaker), Eduardo Ramos, Instituto de Geofísica UNAM, Mexico City, Centro de
Investigación en Energía, UNAM, Cuernavaca, México
On the Mechanism of Turbulent Blending in Stirred Tank Reactors
12:05 pm
Minye Liu, DuPont Company, Wilmington, USA
Structure Characteristics of Corded Isolated Mixing Region in Stirred Tank
12:30 pm
Shunsuke Hashimoto, Osaka University, Osaka, Japan
12:55 -1:55 Lunch
pm
(Restaurante Buffet “El Mercado”)
3:00- 5:00
pm
NAMF Executive Council Meeting
(“Maya Room”, Convention Center)
5:30- 6:30
pm
6:30- 7:30
pm
Social Hour (Lobby Bar, “La Cúpula”)
Dinner
(Restaurante Buffet “El Mercado”)
Session 6: Static and Other In-Line Mixers
Chairs: Jamal Chaouki, Ecole Polytechnique de Montréal, Canada.
Shaliza Ibrahim, Universiti Malaya, Malaysia.
Experimental Comparison of Mixing Processes in Continuous Flow Mixers and Stirred Tank Reactors Based
7:30 pm
on the Iodide-Iodate Reaction Method
Andreas Kölbl, Kalrsruher Institute für Technologie, Germany
Small Scale Performance of Inline Mixers in Solid-Liquid Mixing Processes
7:55 pm
Scott Anderson, Ika Works Inc., Wilmington, USA
8:20 pm
Coffee Break and Exhibit (Foyer, Convention Center)
Ultrafast Quasi Pipeline Mixing Process and Mixer in Forced Confined Mixing Layers
8:50 pm
Wei Zhao, Guiren Wang (speaker), University of South Carolina, Columbia, USA
Mixing Patterns in KM Static Mixers using Non-newtonian Fluids: Effect of Scale, Viscosity Ratio and Flow
Rate
9:15 pm
1
1
1
2
1
Federico Alberini (speaker), Mark Simmons, Andy Ingram, Hugh Stitt, University of Birmingham,
2
Birmingham, Johnson Matthey Technology Centre, Billingham, UK
Liquid-liquid Dispersion in In-line Silverson Rotor-stator Mixers: Experiments and Simulations
1
1
2
3
4
1
Steven Hall (speaker), Andrzej W. Pacek, Mike Cooke, Adam J. Kowalski, David Rothman, University of
9:40 pm
2
3
Birmingham, Birmingham, University of Manchester, Manchester, Process Science, Unilever R&D, Port
4
Sunlight, Silverson Machines Ltd., Chesham, UK
10:05Social Hour and Exhibit (Foyer, Convention Center)
11:30 pm
Wednesday, June 20th
Session 7: Mixing Issues in Biotechnological Processes
Chairs: Alvin W. Nienow, University of Birmingham, UK.
Thomas Hanley, Auburn University, USA.
Breakfast
7:00- 8:00
am
(Restaurante Buffet, “La Plaza”)
The Effect of Forced Mixing in Beer Fermentation: A Review
1
2
3
1
Mikkel Nordkvist (speaker), Chris Boulton, Alvin W. Nienow, Alfa Laval Tank Equipment A/S, Ishoej,
8:00 am
2
3
(plenary)
Denmark; Division of Food Sciences, University of Nottingham, Loughborough, UK; Centre for Bioprocess
Engineering, University of Birmingham, UK
Eccentrically Agitated Tanks in Biotechnology Applications: Examples, Advantages and Challenges
David Bulnes-Abundis, Leydi Maribel Carrillo-Cocom, Alfonso García-Ulloa, Josefina Castillo-Reyna, Marisa
8:45 am
Granados-Pastor, Pamela Belén Sánchez-Arreola, Gayathree Murugappan, Mario Moisés Álvarez (speaker),
Centro de Biotecnología-FEMSA, Tecnológico de Monterrey, México
Pilot and Large Scale Testing of a Mixing System for Enhanced Nutrient Removal in a Large Wastewater
Treatment Plant
9:10 am
Marcus Hoefken (speaker), Walter Steidl, Marina Boehm, INVENT Environmental Technologies Inc., Cedar
Grove, USA
Scale-up of Cellulase Enzymes Production by Trichoderma reesei: Characterization of Mass Transfer Inside
Model Fluids and Fermentation Broth
1,2
2
2
1
2
9:35 am
Jean-Christophe Gabelle, Etienne Jourdier, Fadhel Ben Chaabane, Jérôme Morchain, Frédéric Augier
1
2
(speaker), INSA, Toulouse, Process Development and Engineering Division, IFPEN-Lyon, Vernaison,
France
10:00 am
Coffee Break and Exhibit (Foyer, Convention Center)
Some Mixing Aspects During the Production of the Entomopathogenic Nematode, Steinernema
carpocapsae CABA01, in Submerged Culture in Air Lift Fermentors
10:20 am
Norberto Chavarría-Hernández (speaker), Javier Pineda-González, Adriana-Inés Rodríguez-Hernández,
Instituto de Ciencias Agropecuarias, Universidad Autónoma del Estado de Hidalgo, Tulancingo, México
Oxygen Transfer Rate is Affected by the Shake Flask Geometry in the Production and O-mannosylation of
Recombinant APA Glycoprotein from Mycobacterium tuberculosis in Streptomyces lividans
1,2
1,2
2
2
Ramses Adolfo Gamboa-Suasnavart, Luz Deisy Marín-Palacios Norma Adriana Valdez-Cruz, Luis
10:45 am
3
3
1,2
1
Servín-Gonzalez, Wolf Klöckner, Jochen Büchs, Mauricio Trujillo-Roldán (speaker), Unidad de
2
3
Bioprocesos, Instituto de Investigaciones Biomédicas, UNAM, Mexico City, México, AVT- Biochemical
Engineering, RWTH Aachen University, Aachen, Germany
11:10 am
Coffee Break and Exhibit (Foyer, Convention Center)
Session 8: Mixing in Small Scale and Shaken Vessels
Chairs: Mario Álvarez, Tecnológico de Monterrey, México.
Jérôme Morchain, Université de Toulouse, France.
Mixing Performance of the Novel KDM Impeller in Small Laboratory-Scale Systems
11:30 am
Richard F. Cope (speaker), Zhao Yu, Kishore K. Kar, Engineering & Process Science, Fluid Mechanics &
Mixing, The Dow Chemical Company, Midland, USA
Enhanced Mixing on Small Scales in Microfluidic Screening Bioreactors
1
2
3
2
1
Gena Peterat (speaker), Stefanie Demming, Hannah Schmolke, Ala’aldeen T. Al-Halhouli, Astrid Edlich,
11:55 am
2
3
1
1
2
Stephanus Büttgenbach, Claus-Peter Klages, Rainer Krull, Institute of Biochemical Engineering, Institute
3
of Microtechnology, Institute of Surface Technology, Technische Universität Braunschweig, Germany
Characterization of Oxygen Transfer, Power Input and Hydrodynamics in Shaken Disposable Bioreactors
12:20 pm
1
1
1
2
1
1
Wolf Klöckner (speaker), Clemens Lattermann, Riad Gacem, Tibor Anderlei, Jochen Büchs, AVT-
2
1:10- 2:10
pm
Biochemical Engineering, RWTH Aachen University, Aachen, Germany, Adolf Kühner AG, Birsfelden,
Switzerland
On the Fluid and Mixing Dynamics of Orbitally Shaken Bioreactors
Weheliye Weheliye, Michael Yianneskis, Andrea Ducci (speaker), University College London, London, UK
Lunch
(Restaurante Buffet, “El Mercado”)
3:45- 5:45
pm
POSTER SESSION (see program separately)
Including Social Hour and Exhibit
5:45- 6:00
pm
6:00 pm
7:00- 10:00
pm
10:0011:00 pm
Break
12:45 pm
Bus Boarding to Xcaret
Dinner-Show at Xcaret
Social Hour
(Lobby Bar, “La Fuente”)
“Cozumel-Holbox” Room, Convention Center
Thursday, June 21th
Session 9: Industrial Mixing Processes: Large Scale, Mechanical Design and Operation Strategies
Chairs: Ramesh Hemrajani, Mixing and Reactor Solutions, USA.
Jie Wu, CSIRO and RMIT University, Australia.
Breakfast
7:00- 8:00
am
(Restaurante Buffet, “La Plaza”)
Water and Wastewater Mixing: Lighting up a Dark Art
8:00 am
(plenary)
Mick Dawson, BHRGroup, The Fluid Engineering Centre, Cranfield, UK
Advanced Hydrofoil Impeller Design, ARI-2
8:45 am
Bob Higbee, Jason Giacomelli (speaker), Wojciech Wyczalkowski, Philadelphia Mixers (PMSL), Palmyra, USA
Experimental Investigation of the Flow Dynamics of Rheologically Complex Fluids in a Maxblend Impeller
System
1
1
1
1
2
3
9:10 am
André Fontaine, Yoann Guntzburger, François Bertrand, Louis Fradette, Marie-Claude Heuzey, Ric
1
2
Yatomi, URPEI and CREPEQ, Department of Chemical Engineering, Ecole Polytechnique de Montréal,
3
Canada; SHI Mechanical and Equipment, Ehime, Japan
The Effect of Baffles and Mixer Mounting Position on Impeller Fluid Forces
9:35 am
Richard O. Kehn, SPX Flow Technology (LIGHTNIN Mixers), Rochester, USA
10:00 am
Coffee Break and Exhibit (Foyer, Convention Center)
Study of the Influence of Side-entry Impellers on the Mixing Time of a Large Scale Diesel Storage Tank
1
1
2
2
Fredy Antonio Cabrales-Navarro, Helver Crispiniano Alvarez Castro, Adriana Soares Ito , Mário Jorge
10:20 am
2
2
1
1
Lima, Waldir Pedro Martigoni, Nicolas Spogis , José Roberto Nunhez (speaker), Universidade Estadual
2
de Campinas, Campinas, PETROBRAS AB-RE/TR/TE - EDISE, Rio de Janeiro, Brazil
Mixing Characteristics of Large Impellers
1
1
2
1
10:45 am
Koji Takahashi (speaker), Yasuyuki Takahata, Ryuichi Yatomi, Department of Biochemical Engineering,
2
Yamagata University; Sumitomo Heavy Industries Process Equipment Co., Ltd., Japan
Flow Regimes and Surface Air Entrainment in Partially Filled Stirred Vessels for Different Fill Ratios
11:10 am
Shilan Motamedvaziri, Piero M. Armenante (speaker), New Jersey Institute of Technology, Newark, USA
Characterization of Mixing Processes by Radioactive Particle Tracking
11:35 am
Ebrahim Alizadeh, Hamed Bashiri, François Bertrand, Jamal Chaouki (speaker), Department of Chemical
Engineering, Ecole Polytechnique de Montréal, Canada
12:00-1:00
Lunch
pm
(Restaurante Snack, “El Faro” or Restaurante Brasileño “El Rodizio”)
Session 10: Mixing in Solids-Liquid and Particulate Solid Systems
Chairs: Arthur Etchells III, Rowan University, USA.
Luis Sierra, Merck & Co., USA.
Process Intensification – High Solids Concentration Suspension Agitation and Beyond
3:00 pm
Jie Wu (speaker), Bon Nguyen, Graeme Lane, Steven Wang, Raji Parthasarathy, Lachlan J. Graham, CSIRO
and RMIT, Highett , Australia
Solids Loading Effect on Just-suspended Speed
1
2
3
1
2
3
3:25 pm
Kevin J. Myers, Eric E. Janz (speaker), Julian B. Fasano, University of Dayton, Chemineer, Inc. Mixer
Engineering Inc.
A New Correlation for the Suspension of Freely Settling Solids Using Continuous Jet Mixers
3:50 pm
David A. R. Brown, BHR Group, The Fluid Engineering Centre, Cranfield, UK
Using Tomography and CFD to Measure the Degree of Homogeneity in Solid-Liquid Mixing Operations
4:15 pm
Seyed Hosseini, Dineshkumar Patel, Farhad Ein-Mozaffari (speaker), Mehrab Mehrvar, Department of
Chemical Engineering, Ryerson University, Ontario, Canada
4:40 pm
Coffee Break and Exhibit (Foyer, Convention Center)
A Study of Solid-liquid Suspension in Stirred Tank Using Novel Impeller Geometries
1
1
1
1
1
2
Zauyah Zamzam, Yoshikazu Kato, Takahiro Nemoto, Hisayuki Kanamori, Makoto Sato , Shaliza Ibrahim
2
2
1
4:55 pm
(speaker), Siau Dhing Wong, Inas Baker, SATAKE R&D Section, Mixing Technology Laboratory, SATAKE
2
Chemical Equipment Mfg., Ltd., Tokyo, Japan, Dept. of Civil Engineering, Universiti Malaya, Kuala Lumpur,
Malaysia
Improving Solid-liquid Mass Transfer and Energy Efficiency in Agitated High Concentration Slurries
1
1
2
1
1
5:20 pm
Eng Ying Bong, Rajarathinam Parthasarathy (speaker), Jie Wu, Nicky Eshtiaghi, RMIT University,
2
Melbourne, CSIRO, Division of Process Science and Engineering, CSIRO, Highett, Australia
Impact of Mixing on the Addition of Demulsifier in Oil Sands Froth Treatment
1
1
2
2
Patrick Laplante, Marcio B. Machado, Sujit Bhattacharya, Samson Ng, Suzanne M. Kresta (speaker),
1
2
5:45 pm
University of Alberta Department of Chemical and Materials Engineering, Edmonton, Syncrude Research
Center, Edmonton, Canada
Towards a Complete Model for the Flow, Mixing and Granulation of Powders in Rotor-based Equipment
6:10 pm
Jonathan Bouffard, Jamal Chaouki, François Bertrand (speaker), Ecole Polytechnique de Montréal, Canada
6:35- 7:15
Break
pm
7:15- 10:00
pm
10:00 –
11:00 pm
NAMF Banquet and Student Awards (starting with NAMF General Meeting, 7:15- 7:45 pm)
(“Quintana Roo Room”, Convention Center)
Evening Social Hour (Lobby Bar, “La Fuente”)
Friday, June 22th
7:00- 8:00 am
8:00 am
8:00 am- 5:30
pm
6:00- 8:00 pm
8:00- 10:00
pm
Breakfast (Restaurante Buffet “La Plaza”)
Bus Boarding to Chichén Itzá
Tour to Chichén Itzá
Dinner (your choice of restaurant)
Evening Social Hour (Lobby Bar, “La Fuente”)
Saturday, June 23th
12:00 pm
Room check out
Poster Session
“Quintana Roo” Room Hall, Convention Center
Wednesday, June 20th, 3:45- 5:45 pm
Chairs: Mauricio Trujillo, Instituto de Investigaciones Biomédicas, UNAM, México.
Thomas Simpson, DuPont Engineering, USA.
Authors
Title
(*presenter)
1
Richard K. Grenville*,
2
2
Minye Liu, James N. Tilton
1
3
Abraham Rojano*, Jorge
2
Flores-Velázquez, Teodoro
3
Espinosa, Irineo López,
1
4
Raquel Salazar, Ulises
Toledo
Minye Liu*
1
2
Axel Falcón-Rojas, Ma.
Soledad Córdova-Aguilar,
1
Enrique Galindo*
1
María Soledad Córdova1
Aguilar*, Mónica García,
1
2
Juan Carlos Moran, Luz
Deisy Marín-Palacio,
2
Mauricio Trujillo-Roldán,
1
3
Gabriel Ascanio, Roberto
1
Zenit-Camacho, Enrique
Soto
Marcio Machado*,
Vesselina Roussinova, Kevin
Bittorf, Suzanne M. Kresta
Recent Development in Mean Age Theory
Oil Drops and Air Bubble Sizes as a Function of the Spatial
Position in a Laboratory-Scale Tank
Velocity Fields of Three Different Shake Flask Geometries
used for Producing Recombinant Glycosylated Protein by
Filamentous Bacteria
Transition Below Fully Turbulent Flow in the Bulk of the Flow
in a Stirred Tank Driven by A310, HE3 and PBT Impellers
CFD Simulation of Mixing High Viscosity Fluids in Bioreactors
Binxin Wu*
Jason Giacomelli*,
Wojciech Wyczalkowski
Jason Giacomelli*,
Wojciech Wyczalkowski
Kent E. Wardle*
Elina K. Nauha*, Ville
Alopaeus
1
Blend Times in Jet Mixed Vessels: Comparison of
Experimental Measurements with CFD Modeling
Variable Viscosity Effects on Stationary Digester Mixer
2
Zhongliang Lu, Paul W.
Vortex Generation with Submerged Baffles
Afiliation
1
2
Richard K. Grenville, DuPont
Engineering, Wilmington, USA.
1
2
Universidad de Chapingo, CORI,
3
Universidad de Chapingo, IAUIA
Universidad de Chapingo, Chapingo,
4
México, West Virginia State University,
USA
DuPont Company, Wilmington, USA.
1
Instituto de Biotecnología,
2
Cuernavaca, Centro de Ciencias
Aplicadas y Desarrollo Tecnológico,
Mexico City, UNAM, México
1
Centro de Ciencias Aplicadas y
2
Desarrollo Tecnológico, Instituto de
3
Investigaciones Biomédicas, Instituto
de Materiales, UNAM, Mexico City,
México
Department of Chemical and Materials
Engineering, University of Alberta,
Edmonton, Canada
Philadelphia Mixing Solutions Ltd,
Palmyra, USA
PMSL, Palmyra, USA
Measurement of Wall Jets in Stirred Tanks with Varying
Baffle Off-Wall Clearance and their Relationship to Solids
Suspension and Cloud Height
Investigation of Annular Centrifugal Contactor Mixing Zone
Flow Electrical Resistance Tomography (ERT) and Using HighSpeed Imaging
Mass Transfer Measurements in a Filamentous Fermentation
Broth
PMSL, Palmyra, USA
CFD Analysis of an Automated Tissue Digester for Pancreatic
1
Chemical Sciences and Engineering
Division, Argonne National Laboratory,
USA
School of Chemical Technology,
Department of Biotechnology and
Chemical Technology, Aalto University,
Espoo, Finland
Department of Chemical Engineering,
1
2
Todd, Thomas R. Hanley*
Islet Production
David Bulnes-Abundis,
Alfonso García-Ulloa, Mario
Moisés Alvarez*
1,2
Luz Deisy Marin-Palacio
1,2
Ramses Adolfo Gamboa2
Suasnavart, Norma
2
Adriana Valdez-Cruz, Luis
3
Servín-Gonzalez, Wolf
3
Klöckner, Jochen Büchs,
1,2
Mauricio Trujillo-Roldán*
Mixing Topology and Short Term Mixing Dynamics in
Eccentrically Agitated Stirred Tanks
Ana Milena GaravitoTorres*, Daniel de Souza
Simões, José Roberto
Nunhez
Fang Yang; Wei Zhao;
Guiren Wang*
Edgar Honorato-Sánchez*,
Eleazar Escamilla-Silva
1
Eng Ying Bong,
Rajarathinam
2
Parthasarathy*, Jie Wu,
2
Nicky Eshtiaghi
1
1
Chongguang Yu,
Rajarathinam
2
Parthasarathy*, Jie Wu,
1
Nicky Eshtiaghi
1
1
Gustavo Ortiz-Juárez,
2
Ernesto Mancilla, Ryuchi
2
Yatomi, Hiroo Horiguchi,
3
1
Roberto Zenit, Enrique
1
Soto*, Gabriel Ascanio
1
Diego Humberto CuervoAmaya*, Ma. Soledad
Córdova, Gabriel Corkidi,
Enrique Galindo
Sandeep Kumar Verma*,
Ashok Khanna
Amor Monroy-Villagrana*,
Cynthia Cano-Sarmiento,
Humberto HernándezSánchez, Liliana AlamillaBeltrán, Gustavo Fidel
Gutiérrez-López
Arthur W. Etchells III*,
Robert E. Hesketh, Z. Chen,
M, Mungo, S. Boesch
1
Sebastian Hirschberg,
2
Chris Meyer*
Measurement of Volumetric Power Input in Three Different
Shake Flask Geometries in Rheologically Complex Cultures of
the Recombinant Filamentous Bacteria Streptomyces lividans
Experimental Power Consumption for a Helical Impeller and
Two Anchor Impellers With and Without Scrapers for
Newtonian and Pseudoplastic Fluids
Turbulent Mixing in Microchannel Where Reynolds Number
is in the Order of 1
Numerical Study with CFD of the Power Input in a StirredTank Bioreactor of Standard Geometry Versus Non-standard
with Multiple Impellers
Solid-liquid Mass Transfer in Agitated Slurries with High Solid
Concentration
Mass Transfer in Agitated Dissolution Systems with High
Solids Loadings
On the Origin of the Vertical Recirculation Generated by the
Straight Maxblend Impeller
Air and Oil Dispersion in a Mixing Tank under Constant
Power Input and Varying Concentrations of Surfactants
(Protein) and Solids (Mycelial Biomass)
Modelling and Simulation of Trickle Bed Reactor Internal
Nozzle
Characterization of the Flows and the Residence Times
Distributions in Y Type Microfluidizer
Some Observations on the Effect of Particle Shape on Solids
Suspension in Mechanically Stirred Tanks
TM
Mixing Performance of the SMX plus under Turbulent Flow
Conditions
Auburn University; Techshot, Inc.
,Greenville, USA
Centro de Biotecnologia-FEMSA.
Tecnológico de Monterrey, Monterrey,
México
1
Unidad de Bioprocesos,
2
Departamento de Biología Molecular y
Biotecnología, Instituto de
Investigaciones Biomédicas, UNAM,
3
Mexico City, México. AVTBiochemical Engineering, RWTH
Aachen University, Aachen, Germany
Faculdade de Engenharia Química,
Departamento de Engenharia de
Processos, Universidade Estadual de
Campinas – UNICAMP, Campinas,
Brazil.
Department of Mechanical Engineering
and Biomedical Engineering Program,
University of South Carolina, Columbia,
USA
Departamento de Ingeniería Química,
Instituto Tecnológico de Celaya,
Celaya, México.
1
School of Civil, Environmental and
Chemical Engg, RMIT University,
2
Melbourne, Australia; CSIRO, Division
of Process Science and Engineering,
Highett, Australia
1
School of Civil, Environmental and
Chemical Engg, RMIT University,
2
Melbourne, Australia; CSIRO, Division
of Process Science and Engineering,
Highett , Australia
1
Centro de Ciencias Aplicadas y
Desarrollo Tecnológico, UNAM, Mexico
2
City, México; SHI Mechanical &
3
Equipment, Tokyo, Japan; Instituto de
Investigaciones en Materiales, UNAM,
Mexico City, México
Instituto de Biotecnología, UNAM,
Cuernavaca, México
Department of Chemical Engineering,
Indian Institute of Technology, Kanpur,
India.
Departamento de Graduados e
Investigación en Alimentos, Escuela
Nacional de Ciencias Biólogicas-IPN,
Mexico City, México
Rowan University, Glassboro, USA
1
Sulzer Chemtech AG, Winterthur,
2
Switzerland, Sulzer Chemtech USA,
Inc., Teaneck, USA