Material Safety Data Sheet - Login

Material Safety Data Sheet
Pursuant to regulation (EC) No. 1907/2006
Molecular sieve
Metrohm AG
CH-9100 Herisau
Switzerland
[email protected]
www.metrohm.com
2013-01-28
8.106.7491EN
dm/TS/fpe
Molecular Sieve 250 g (6.2811.000)
1
Chemical product and company identification
Product identification
Order number:
6.2811.000
Designation:
Molecular sieve 250 g
Company identification
2
Name and address:
Metrohm AG, CH-9101 Herisau, Switzerland
Phone:
+41 71 353 85 85
Fax:
+41 71 353 89 01
E-mail:
[email protected]
Internet:
www.metrohm.com
Emergency tel. no.
145 (CH)
+41 44 251 51 51
Emergency information under:
http://www.toxi.ch/eng/welcome.html
Hazards identification
This substance is not regarded as hazardous according to existing legislation.
3
Composition, information on ingredients
Chemical characterization
Silicate with inorganic binder.
CAS no.:
4
5
1318-02-1
EC no.:
215-283-8
First aid measures
Inhalation:
Fresh air.
Contact with skin (particles,
dusts):
Wash with plenty of water.
Contact with eyes:
Rinse with plenty of water with palpebral fissure opened. Consult an eye specialist if necessary.
Ingestion (large amounts):
Call for medical aid if not feeling well.
Fire fighting measures
Product is not flammable.
Suitable extinguishing media:
6
Use extinguishing media appropriate to surrounding fire.
Accidental release measures
8.106.7491EN
Personal protection measures:
Avoid contact with the substance. Avoid inhalation of dusts.
Environmental protection
measures:
Do not empty into drains.
Cleaning procedure:
Pick up dry. Dispose. Clean. Do not permit dust to collect.
1/3
7
Handling and storage
Handling
No additional requirements.
Storage
Store in a tightly closed container at room temperature (recommended: +15 to +25 °C).
8
Exposure control, personal protective equipment
Personal protective equipment
Breathing protection:
Not required.
Eye protection:
Not required.
Hand protection:
Not required.
Hygiene at the workplace
Wash hands after finishing work.
9
10
Physical and chemical properties
Appearance:
Beads of about 1
mm in diameter.
Color:
Beige.
Odor:
Odorless.
pH value (20 °C):
–
Melting point:
Not available.
Boiling point:
Not available.
Ignition temperature:
Not applicable.
Flash point:
Not applicable.
Explosion limits, lower:
Not applicable.
Explosion limits, upper:
Not applicable.
Stability and reactivity
The product is stable at normal conditions.
Conditions to avoid
No data available.
Incompatibilities with other materials
Avoid contact with volatile substances (except water): flammable gases or vapors could arise during their desorption.
Hazardous decomposition products
No data available.
11
Toxicological information
Additional information
We are not in possession of any quantitative data regarding the toxicity of this product.
Additional toxicological information
We are not in possession of any description of toxicological symptoms.
Additional information
The usual precautionary measures for working with chemicals should be observed.
12
Ecological information
No data available.
13
Disposal considerations
Product
No uniform regulations for the disposal of chemicals or waste materials are in effect in the EU. Chemicals which are
generated as waste materials are as a rule hazardous waste, the disposal of which is regulated by corresponding
laws. Please contact the appropriate authority or disposal firm to obtain the required information.
8.106.7491EN
2/3
Packaging material
Disposal according to the relevant regulations. Contaminated packaging materials are to be treated as the product
itself. If no regulations apply, non-contaminated packaging materials can be treated as household refuse or be recycled.
14
Transport information
Not subject to transport regulations.
15
Regulatory information
GHS designation
Not a dangerous product according to GHS.
Designation according to EC regulations
The product is not subject to labeling requirements under EC regulations or the respective national laws.
German regulations
Water hazard classification:
16
German WGK 1 (slightly harmful to water).
Additional information
Reason for update
General revision.
Version 2013-01-28.
Replaces edition of 2011-09-02.
The above information is based on current state of knowledge and serves to describe the product in terms of the
safety measures that are to be implemented. It does not represent an assertion of properties of the described
product.
8.106.7491EN
3/3