Nut Keeper Plate - ElectricalManuals.net

Nut Keeper Plate - ElectricalManuals.net

s
Item:
Nut Keeper Plate
Placa terminal para fijación de conexiones
Connection par vis
TNKM _
TNKP _
TMKM _
TMKP _
_
_
_
_
_
_
_
_
For Use With Frame MG, NG, PG
Para Usar Con Caja Base MG, NG, PG
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Use only with Siemens certified Components.
1/4”
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
5/16 x 18 x 1.5
6 mm
5/16 x 18 x 2
TNKP - 1X
TNKP3 - 3X
TNKP4 - 4X
TNKM – 1X
TNKM3 – 3X
TNKM4 – 4X
VL – NG / PG Frame [ Caja Base ]
VL – MG Frame [ Caja Base ]
3 Pole [ Polos ] = 2X - TNKP3
3 Pole [ Polos ] = 2X - TNKM3
4 Pole [ Polos ] = 2X - TNKP4
4 Pole [ Polos ] = 2X - TNKM4
M8 x 1.25 x 40mm
M8 x 1.25 x 50mm
TMKP - 1X
TMKP3 - 3X
TMKP4 - 4X
TMKM – 1X
TMKM3 – 3X
TMKM4 – 4X
VL – NG / PG Frame [ Caja Base ]
VL – MG Frame [ Caja Base ]
3 Pole [ Polos ] = 2X - TMKP3
3 Pole [ Polos ] = 2X - TMKM3
4 Pole [ Polos ] = 2X - TMKP4
4 Pole [ Polos ] = 2X - TMKM4
“T”=
T
“T” =
1/3
8 0 6 8 8 1 A 0 0
MG
NG
PG
5/16 – 18 X 1.5
5/16 – 18 X 2
5/16 – 18 X 2
1/4
1/4
1/4
MAX. .60
[ 15 mm ]
MIN. .40
[ 10 mm ]
MAX. .80
[ 20 mm ]
MIN. .60
[ 15 mm ]
M 8 X 40mm
M 8 X 50mm
6 mm
6 mm
MAX. 15 mm
MIN. 10 mm
MAX 20.0 mm
MIN 15.0 mm
MAX. .80
[ 20 mm ]
MIN. .60
[ 15 mm ]
M 8 X 50mm
6 mm
MAX. 20.0 mm
MIN. 15.0 mm
Frame MG / Caja Base MG
2
1
c l ic
3 POLE = 6X
POLOS
4 POLE = 8X
POLOS
4
3
1
6mm
1/4”
TMKM - 212 lb. in. TNKM - 212 lb. in.
[ 24 Nm ]
[ 24 Nm ]
2
5
11 lb. in.
[ 1.2 Nm ]
18 lb. in.
[ 2.0 Nm ]
2/3
806881A00
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Frame NG – PG / Caja Base NG - PG
2
1
c l ic
3 POLE = 6X
POLOS
4 POLE = 8X
POLOS
4
3
1
6mm
1/4”
TMKP- 212 lb. in. TNKP- 212 lb. in.
[ 24 Nm ]
[ 24 Nm ]
2
5
11 lb. in.
[ 1.2 Nm ]
Technical Support:
Subject to change without prior notice
Siemens Energy & Automation Inc. , Alpharetta, GA U.S.A.
Toll Free: 1-800-964-4114
3/3
Internet: www.sea.siemens.com
© Siemens Energy & Automation Inc. 2004
806881A00