sliding door hardware - Top Notch Distributors, Inc.

Comentarios

Transcripción

sliding door hardware - Top Notch Distributors, Inc.
FAQ
INTRODUCING
Do the kits include the door and header board?
No, door and header board are purchased separately.
DECORATIVE INTERIOR
What size header board is required?
A 2 x 6 header board is recommended, however, a 1 x 6 header board can be used as well.
SLIDING DOOR HARDWARE
What is the door width that the kits can accommodate?
The kits can accommodate up to a 38” door.
What size door do I need if replacing an existing swinging door?
See chart below:
Existing Door Width
24”
28”
30”
32”
Total Overlap
1/2”
1/2”
1/2”
1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
29”
33”
35”
37”
Total Casing Width
New Sliding Door Width
What is the maximum door opening width?
36” is the maximum door opening width that is recommended for a single door.
For an opening over 36”, two pieces of track (from 2 kits) should be used with
National Hardware’s connecting adapter.
What door thickness can the kits accommodate?
The kits can accommodate 1-3/8” or 1-3/4” door thickness.
What is the maximum door weight for each kit?
The maximum weight is 200 lbs per door.
What type of door will work with this hardware?
Custom interior doors, interior slab doors and most other interior doors are compatible.
Can I connect two pieces of track together?
Yes, you can connect two pieces of track using National Hardware’s connecting adaptor.
Perfect for bedrooms, bathrooms and other living spaces
Are the products tested for durability?
Yes, both kits are designed and tested to follow ANSI/BHMA Grade 1 requirements.
Designed and tested to follow ANSI/BHMA Grade 1 standards
Offered in oil rubbed bronze and stainless steel
Kits include 72” track, hangers, doorstops, anti-jump discs and floor guides
What is the Product Warranty?
Our products come with a Lifespan Limited Lifetime Warranty.
To learn more, go to http://www.natman.com/support/faqs.
Where can I find more info about National Hardware?
To learn more about National Hardware, visit our website at www.natman.com.
www.natman.com
www.natman.com
10256_SN
N186-960
N186-962
Decorative Interior Sliding Door Hardware
Decorative Interior Sliding Door Hardware
Features
Features
• Adds rustic appeal to interior door openings
• Adds contemporary appeal to interior door openings
• Cost effective way to add style and privacy to an open doorway
• Cost effective way to add style and privacy to an open doorway
• Includes all mounting hardware and components to hang one interior door
• Includes all mounting hardware and components to hang one interior door
• Includes detailed instructions for easy installation
• Includes detailed instructions for easy installation
• Designed and tested to follow ANSI/BHMA Grade 1 Standards
• Designed and tested to follow ANSI/BHMA Grade 1 Standards
• Use connecting adaptor N187-001 to connect multiple pieces of track
• Use connecting adaptor N187-002 to connect multiple pieces of track
Specifications
Specifications
Components
72” flat track, 2 hangers, 2 doorstops, 2 anti-jump disks, 1 single floor guide, 1 double floor guide,
mounting hardware
Components
Finish Oil Rubbed Bronze
72” tubular track, 2 hangers, 2 doorstops, 1 single floor guide, 1 double floor guide,
mounting hardware
Finish Stainless Steel
Material Steel
Material Stainless Steel
Door Mount Location Face
Door Mount Location Top
Maximum Door Weight 200 lbs
Maximum Door Weight 200 lbs
Door Thickness 1-3/8" and 1-3/4"
Door Thickness 1-3/8" and 1-3/4"
Opening Size Accommodates openings of up to 36” wide; for openings wider than 36” use multiple kits
Opening Size Accommodates openings of up to 36” wide; for openings wider than 36” use multiple kits
Warranty Limited Lifetime
Warranty Limited Lifetime
N187-001
N187-002
Connecting Adaptor
Connecting Adaptor
Features
• Connects multiple flat tracks for door openings wider than 36”
• Includes fasteners for quick and easy installation
• Use with decorative sliding door hardware kit N186-960
Specifications
Components Adaptor, 4 installation screws
Finish Oil Rubbed Bronze
Material Steel
Warranty Limited Lifetime
Features
• Connects multiple tubular tracks for door openings wider than 36”
• Use with decorative sliding door hardware kit N186-962
Specifications
Components Adaptor
Finish Stainless Steel
Material Stainless Steel
Warranty Limited Lifetime
Door Stop Positioning
Colocación de topes de puerta
Use the instructions below as a remedy if the track
fasteners are between the door stop and hanger.
Utilice las instrucciones que se presentan a continuación
como solución en caso de que los sujetadores de vía se
encuentren entre el tope de puerta y el soporte colgante.
A
Remove door from track.
Retire la puerta de la vía.
B
Remove the set of fasteners
that were preventing the door
stop from moving into position.
Retire la serie de sujetadores
que evitaban que el tope
de puerta se moviera hacia
su respectiva posición.
C
Slide the door stop onto the
track, past the hole where the
fasteners were removed.
Deslice el tope de puerta sobre
la vía, hasta una posición
que pase el orificio donde se
retiraron los sujetadores.
1/2
SN11043-XX Rev 1
920 ORB Kit
www.natman.com
1-800-346-9445
track fasteners
sujetadores
de vía
hanger
soporte
colgante
door stop
tope de
puerta
D
Reinstall fasteners, making
sure to keep track level.
Reinstale los sujetadores, y
mantener el nivel de la vía.
E
Reinstall door. Test to make
sure it slides smoothly.
Position door so it overlaps
the opening by 1" (25 mm).
Reinstale la puerta. Pruebe la
puerta para asegurarse de que
se desliza suavemente. Posiciona
la puerta de manera que se
superponga con la abertura en
1" (25 mm) en ambos lados.
F
1"
25 mm
Slide door stop so it
touches the hanger.
Tighten the set screws
to secure it in place.
Deslice el tope de puerta
para que toque el soporte
colgante. Ajuste los
tornillos de fijación para
asegurarlo en su lugar.
2/2
© 2014 National
Manufacturing Co.
Door Stop Positioning
Colocación de topes de puerta
A
Remove door from track.
Retire la puerta de la vía.
B
Remove the set of fasteners
that were preventing the door
stop from moving into position.
Retire la serie de sujetadores
que evitaban que el tope
de puerta se moviera hacia
su respectiva posición.
C
Slide the door stop onto the
track, past the hole where the
fasteners were removed.
Deslice el tope de puerta sobre
la vía, hasta una posición
que pase el orificio donde se
retiraron los sujetadores.
1/2
www.natman.com
1-800-346-9445
track fasteners
sujetadores
de vía
Use the instructions below as a remedy if the track
fasteners are between the door stop and hanger.
Utilice las instrucciones que se presentan a continuación
como solución en caso de que los sujetadores de vía se
encuentren entre el tope de puerta y el soporte colgante.
SN11035-XX Rev 1
922 SS Kit
hanger
soporte
colgante
door stop
tope de
puerta
D
Reinstall fasteners, making
sure to keep track level.
Reinstale los sujetadores, y
mantener el nivel de la vía.
curve of spacer
mates with
curve of tube
la curva del
espaciador
coincide con la
curva del tubo
E
Reinstall door. Test to make
sure it slides smoothly.
Position door so it overlaps
the opening by 1" (25 mm).
Reinstale la puerta. Pruebe la
puerta para asegurarse de que
se desliza suavemente. Posiciona
la puerta de manera que se
superponga con la abertura en
1" (25 mm) en ambos lados.
F
1"
25 mm
Slide door stop so it
touches the hanger.
Tighten the set screw
to secure it in place.
Deslice el tope de puerta
para que toque el soporte
colgante. Ajuste el
tornillo de fijación para
asegurarlo en su lugar.
2/2
© 2014 National
Manufacturing Co.