Schematics in ArcMap Tutorial

Transcripción

Schematics in ArcMap
Tutorial
Copyright © 1995-2012 Esri All rights reserved.
Table of Contents
Introducing Schematics in ArcMap Tutorial
. . . . . . . . . . . . . . . . . . . . . . . . 0
Exercise 1: Getting familiar with Schematics tools
. . . . . . . . . . . . . . . . . . . . . 0
Exercise 2: Generating schematic diagrams . . . . . . . . . . . . . . . . . . . . . . . . 0
Exercise 3: Editing and layout of schematic diagrams
. . . . . . . . . . . . . . . . . . . . 0
Exercise 4: Updating schematic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . 0
Copyright © 1995-2012 Esri. All rights reserved.
2
Introducing Schematics in ArcMap Tutorial
ESRI ArcGIS Schematics is an extension to the ArcGIS Desktop products
(ArcView, ArcEditor, and ArcInfo). It allows the user to get simplified
representations of networks, intended to explain their structure and make the
way they operate understandable. It can be used to manage physical and
logical networks, including social and economic networks, and may view and
represent any kind of network such as electric power, traffic light, delivery
route, computer, and so forth. It enables users to automatically generate,
visualize, and manipulate diagrams from network data or data that has
attributes for connectivity.
Complejidad:
Principiante
Requisitos de datos:
Configuración de datos de tutorial de
ArcGIS
Ruta de datos:
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap
Objetivo:
Getting acquainted with Schematics tools
and commands available on the
Schematics toolbars in ArcMap
Learning about generating and updating
diagrams
Learning about how to lay out schematic
diagrams using the Schematics
refinement tools and layout algorithms
In this tutorial
This tutorial is dedicated to Schematics in ArcMap. The easiest way to find out what you can do with
Schematics in ArcMap is to complete the exercises in this tutorial.
• Exercise 1: Getting familiar with Schematics tools—Explains the ArcGIS Schematics graphical user
interface by using a variety of its tools.
•
Exercise 2: Generating schematic diagrams—Shows how to generate schematic diagrams from
different situations.
•
Exercise 3: Editing and layout of schematic diagrams—Concerns the management of editing
sessions on schematic diagrams and how to refine their content and lay them out.
•
Exercise 4: Updating schematic diagrams—Explains how to update schematic diagrams.
Nota: To use this tutorial, you need to have the Schematics extension and ArcGIS
installed and have the tutorial data installed on a local or shared network
drive on your system.
3
Exercise 1: Getting familiar with Schematics tools
Loading the Tutorial .mxd file
ArcGIS
Pasos:
1.
Complejidad:
Principiante
In ArcCatalog, navigate to the
Ruta de datos:
Objetivo:
Becoming familiar with the ArcGIS
Schematics graphical user interface by
using a variety of its tools
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap folder in the Catalog tree.
This is the default installation location for this data.
2.
Double-click the ElecDemo.mxd file.
It opens an ArcMap window that appears as follows:
3.
If the Schematics extension is not enabled, on the Customize menu, click Extensions, then
click Schematics in the Extensions dialog box and close the Extensions dialog box.
4
Loading the Schematics extension toolbars
Pasos:
1.
Click Customize on the main menu and click Customize Mode.
2.
Check the Schematic, Schematic Editor, and Schematic Network Analyst check boxes and
click Close.
3.
Arrange the toolbars under the toolbar main menu.
Opening a saved diagram
Pasos:
1.
Click the Open Schematic Diagrams button .
The Select Schematic Diagrams To Open dialog box appears.
2.
Navigate to the
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap\ElecDemo.gdb
geodatabase.
3.
Double-click the ElecDemo schematic dataset, then double-click the Feeders schematic
subfolder.
4.
Click Feeder 0801-Rice Creek in the diagram list.
5.
Click Add.
The diagram opens in a new data frame under the Geography data frame. You can collapse
the Geography data frame for a better view of the table of contents.
5
Displaying diagrams in a viewer window
Pasos:
1.
Click Windows on the main menu and click Viewer.
The open diagram is displayed in a viewer window.
2.
Right-click the Geography entry in the Table Of Contents and point to Activate to visualize
the geographic features. Resize the viewer window and use the Pan tool to arrange all data
and enable working with the schematic diagram and geographic features side by side onscreen.
6
Nota: Any schematic layout algorithm execution, schematic command
triggering, or manipulation using any schematic tool (such as
Schematics editing or refinement tools) can be done inside a
viewer window.
Locating selected features
Pasos:
1.
Click the Schematic drop-down menu on the Schematic toolbar and click Schematic Options.
2.
Click the Propagate tab.
a. Check Always zoom to the selected features when selection is propagated from
Schematic > Map.
b.
Check Always zoom to the selected schematic features when selection is
propagated from Map > Schematic.
c.
Check Propagate to all diagrams.
7
3.
Click OK.
4.
In the Table Of Contents, right-click the schematic layer related to Feeder 0801-Rice
Creek schematic diagram, click Schematic Selection, then click Select All Schematic
Features.
5.
Click the Propagate Schematic Selection To Map button to locate the associated
geographic features on the map.
The propagate operation might take a few seconds, as the selection contains a large amount
of features.
The selection set is automatically zoomed in on the map.
8
6.
Right-click the Feeder 0801-Rice Creek schematic layer in the Table Of Contents.
7.
Point to Schematic Selection and click
Clear Selected.
The schematic features in the diagram are no longer selected.
8.
Click Selection and click Clear Selected Features
features from the map.
9.
Use the Zoom In tool to zoom in on the Geography map and use the Select Features tool
to select a part of the network by drawing a box.
Ensure that the features you select are part of the network used to generate the schematic
diagram.
10.
on the main menu to clear selected
Click the Propagate Map Selection To Schematic button .
The selection set is automatically zoomed in on the diagram.
9
11.
Click the Select Features tool on the standard Tools toolbar and click the background of
the map to cancel the feature selections.
12.
Right-click the Feeder 0801-Rice Creek schematic layer in the Table Of Contents, click
Schematic Selection, then click
Clear Selected to cancel the schematic feature selections
on the diagram.
Removing a diagram data frame
Pasos:
1.
Right-click the diagram data frame in the Table Of Contents.
2.
Click Remove.
3.
Click File and click Exit.
4.
Click No when the following message appears: Save changes to ElecDemo.mxd?
10
Exercise 2: Generating schematic diagrams
In this exercise, you will generate your first schematic diagrams from the
result of a manual selection, from a selection by attributes, and from a
tracing result. You will also generate an inside plant diagram from an opened
diagram.
Pasos:
1.
Start ArcMap.
2.
Open the ElecDemo.mxd file stored in
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap.
Complejidad:
Principiante
ArcGIS
Ruta de datos:
Objetivo:
Learn about generating schematic
diagrams from the result of a manual
selection, from a selection by attributes,
and from a tracing result.
Enabling the Viewer Windows running mode
A schematic diagram can be opened in a viewer window. A viewer window can be opened by clicking
Windows and clicking Viewer on the ArcMap menu. You can also work with the Viewer Windows running
mode as the default mode so that each time a diagram is opened or generated, it is automatically displayed
in a viewer window without changing the active data frame. Here are the detailed steps to activate the
Viewer Windows running mode.
Pasos:
1.
Click the Schematic menu on the Schematic toolbar and click Schematic Options.
The Schematic Options dialog box opens.
2.
Click the General tab.
3.
Check Automatically open schematic diagrams in a viewer window in the Viewer Windows
section.
11
4.
Click OK.
The Schematic Options dialog box closes.
From now on, each time a schematic diagram is opened or generated, it is displayed in a viewer window,
and the active data frame is preserved.
Nota: To deactivate this mode, uncheck the check box on the General tab.
Generating a diagram from features manually selected
Pasos:
1.
Click Bookmarks on the main menu and click Manual Selection.
2.
Click the Select Features tool
view .
and draw a box in the map to select everything in the current
12
3.
Click the Generate New Schematic Diagram button
The New Schematic Diagram dialog box opens.
.
4.
Click the browse button next to the Schematic Dataset or Folder text box to specify in which
schematic dataset the schematic diagram is going to be stored.
5.
Browse to the ElecDemo geodatabase available in the C:\
ArcGIS\ArcTutor\Schematics\Schematics\ folder and double-click the ElecDemo schematic
dataset.
6.
Click the Feeders schematic folder and click Add so the schematic diagram to be generated
is stored in this specific Feeders schematic folder in the ElecDemo schematic dataset.
7.
Click the Schematic Diagram Template drop-down arrow and choose GeoSchematic from
the list.
8.
Keep the default [Create New Data Frame] option selected in the Output Data Frame dropdown list.
Nota: If you choose Geography from the list, the diagram will be
displayed in the Geography data frame on top of the map.
9.
Type Manual Selection in the Schematic Diagram Name text box for the diagram to be
generated.
13
10.
In the Input From area, keep the Selection Set In Data Frame option selected and make
sure that the Geography data frame containing the selection set you have just created is
selected in the drop-down list.
11.
Click OK.
The diagram generation starts, and the resulting schematic diagram displays. As the Viewer Windows
mode is activated, the newly created schematic diagram is displayed in a viewer window, and the active
data frame containing the geographic features are preserved. A new data frame related to this diagram
has been created in the Table Of Contents but is not active.
14
Nota: You can adjust the size of the symbols in the diagram using the Decrease
Symbol Sizes and Increase Symbol Sizes buttons if needed.
Generating a diagram based on a schematic selection
The Save Diagram As command can also be used to generate a new diagram based on the current
selection set. When no schematic feature is selected in the active diagram, it copies the entire diagram, but
when schematic features are selected, only that selection set is saved in the new diagram.
Pasos:
1.
Activate the Manual Selection data frame.
2.
Click the Select Features tool and, by drawing a box with the tool, select a few schematic
features on the active Manual Selection schematic diagram you have just generated.
15
3.
Click the Schematic drop-down menu on the Schematic toolbar and click Save Diagram As.
4.
Pick up the ElecDemo:\Feeders (C:\ArcGIS\ArcTutor\
Schematics\Schematics\ElecDemo.gdb) location in the Schematic dataset or Folder
drop-down list.
5.
Type DiagramFromSchematicSelection in the Schematic Diagram Name text box.
6.
Keep the default [Create New Data Frame] option.
16
7.
Click Save.
A new data frame is added to the Table Of Contents. As the Viewer Windows mode is
activated, the new diagram is displayed in a viewer window.
8.
Right-click the new DiagramFromSchematicSelection diagram data frame in the Table Of
Contents and click Remove.
17
9.
Remove the Manual Selection data frame.
10.
Remove the DiagramFromSchematicSelection data frame.
11.
Click Selection on the ArcMap menu and click
12.
Click Bookmarks on the ArcMap menu and click Overview.
Clear selected features.
Generating a diagram from a selection by attributes
Pasos:
1.
Click Selection on the main menu and click
The Select By Attributes dialog box opens.
2.
Click the Layer drop-down arrow and click PrimaryLine.
3.
Double-click Feeder from the fields list.
4.
Click the equal sign button
5.
Click Get Unique Values.
6.
Double-click '411064000' from the unique values list.
The Select By Attributes dialog box appears with the following query information:
7.
Click Apply and click Close.
8.
9.
Select By Attributes.
.
Zoom To Selected Features.
.
18
10.
Click ElecDemo:\Feeders in the Schematic Dataset or Folder text box so the generated
diagram will be stored in the Feeders schematic folder.
11.
Click the Schematic Diagram Template drop-down arrow and choose GeoSchematic in the
list.
12.
Keep the default [Create New Data Frame] option selected in the Output Data Frame
drop-down list.
13.
Type Feeder 411064000 in the Schematic Diagram Name text box for the diagram to be
generated.
14.
Make sure the Selection Set In Data Frame option is checked and the Geography data
frame is currently selected in the drop-down list.
15.
Click OK.
The generated schematic diagram displays in a new data frame. As the Viewer Windows
mode is activated, it opens in a viewer window.
16.
Resize the diagram viewer window. Use the Zoom In tool
needed.
17.
Click the Decrease Symbol Sizes
size of the symbols if needed.
for a better view of the diagram if
and Increase Symbol Sizes
buttons to change the
19
18.
Close the Feeder 411064000 viewer window.
Generating an inside plant diagram
Pasos:
1.
Click the Open Schematic Diagrams command .
2.
Navigate to the
geodatabase.
3.
Double-click the ElecDemo schematic dataset, then double-click the Inside Plants
schematic subfolder.
4.
Click Substation 08 in the diagram list.
5.
Click Add.
20
The Substation 08 diagram opens in a viewer window. This diagram details the equipment
inside a substation.
The schematic features in this diagram come from a set of object tables that detail inside plant contents.
They are also dynamically linked to some GIS data contained in the Geography map, for example, to the
Substation in this map. The next steps highlight these relations:
Pasos:
1.
Click the Schematic drop-down menu on the Schematic toolbar and click Schematic
Options.
2.
Click the Selection tab, then check the three check boxes on this tab and click OK.
3.
Activate the Substation 08 data frame.
4.
08 equipment.
5.
Activate the Geography data frame.
6.
Click Propagate Schematic Selection To Map.
The related Substation is selected in the Geography data frame.
and click the polygon that displays around all the Substation
21
7.
Click Bookmarks on the main menu and click Substation 08 to locate the selected
Substation feature.
8.
Arrange the Substation viewer window to get a clear view of the selected features in both the
Geography and Substation 08 views.
9.
Click Propagate Map Selection To Schematic.
All the schematic features inside the polygon are automatically selected in the Substation 08
diagram.
22
Nota: Note that the Substation schematic feature in the Feeder
411064000 diagram has been also automatically selected.
10.
Clear the selected features on the map.
11.
Remove the Feeder 411064000 data frame.
12.
Remove the Substation 08 data frame.
Generating a diagram from a trace
Pasos:
1.
Load the Utility Network Analyst toolbar (if it is not already displayed).
2.
Click the arrow button next to the Add Junction Flag tool and click the Add Edge Flag tool
3.
Click the primary line between Feeder 0804 Harrison and the substation to add an edge flag.
.
23
4.
Click the Trace Task drop-down arrow on the Utility Network Analyst toolbar and click Trace
Downstream, then click Solve.
5.
Click Bookmarks on the main menu and click Feeder 0804-Harrison.
The tracing result appears as follows:
24
6.
.
7.
Click ElecDemo:\Feeders in the Schematic Dataset or Folder text box.
8.
Click the Schematic Diagram Template drop-down arrow and choose GeoSchematic from
the list.
9.
Keep the default [Create New Data Frame] option selected in the Output Data Frame
drop-down list.
10.
Type Feeder 0804-Harrison in the Schematic Diagram Name text box for the diagram to
be generated.
11.
Make sure the Tracing Result option is checked.
25
12.
Click OK.
The new diagram generation starts. It displays in a viewer window.
13.
Click the Analysis drop-down menu in the Utility Network Analysis toolbar and click Clear
Results, then click Clear Flags.
14.
Resize the viewer window related to the newly created Feeder 0804-Harrison schematic
diagram.
26
15.
Remove the Feeder 0804-Harrison data frame.
16.
17.
27
Exercise 3: Editing and layout of schematic diagrams
In this exercise, you will learn about managing the editing session on
schematic diagrams, refining their content, and laying them out. The majority
of the tools that are going to be used in this exercise are grouped on the
Schematic Editor toolbar.
Requisito previo:
During this exercise, you will have to work on some schematic diagrams
that were generated in exercise 2.
Complejidad:
Principiante
ArcGIS
Ruta de datos:
Objetivo:
Learning about managing the editing
sessions on schematic diagrams, refining
their contents, and laying them out
Pasos:
1.
Start ArcMap.
2.
Open the ElecDemo.mxd file stored in C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap.
Adding new Schematics commands on toolbars
There are some Schematics commands and tools that are not available in the standard Schematics toolbars
by default, such as the Restore Initial Layout and the Open Diagram by Diagram Template commands.
• The Open Diagram by Diagram Template allows you to browse and select the schematic diagram
you want to open, diagram template per diagram template, from any specified schematic dataset (or
schematic folder).
•
The Restore Initial Layout command deletes the saved geometries for all schematic feature
nodes and links contained in the active schematic diagram. After the command execution, the active
schematic diagram’s content is restored to its initial layout.
Since you are going to use these particular commands in the next sections, the following steps explain how
to add the commands on the toolbars:
Pasos:
1.
Click Customize and click Customize Mode.
The Customize dialog box opens.
2.
Click the Commands tab.
3.
Click Schematics in the Categories list.
4.
Click Open Diagram by Diagram Template in the Commands list and drag it onto the
Schematic toolbar.
5.
Click Restore Initial Layout in the Commands list and drag it onto the Schematic Editor
toolbar.
Those commands can be dragged and dropped onto any toolbar, but since the Restore Initial
Layout requires an edit session to be opened on the schematic diagram it impacts, its best
location is on the Schematic Editor toolbar. Place the Open Diagram by Diagram Template on
the same toolbar as the Open Schematic Diagrams command , since it is an alternative
method of opening schematic diagrams.
6.
Click Close.
28
Starting an editing session on a schematic diagram
Before laying out a schematic diagram or refining its content, an edit session must be started on this
diagram. Editing sessions are managed schematic diagram per schematic diagram; that is, when starting an
edit session while a schematic diagram is active, the editing session only starts for this active diagram.
Several schematic diagrams can be edited at the same time, but editing operations only impact the active
schematic diagram. The following steps explain how to start an edit session on a schematic diagram.
Pasos:
1.
Click the Open Schematic Diagrams button on the Schematic toolbar.
2.
Navigate to the
geodatabase, double-click the ElecDemo schematic dataset, then double-click the Feeders
schematic folder.
3.
Click Manual Selection schematic diagram and click Add.
The selected diagram appears in a new data frame.
4.
Click the Schematic Editor drop-down menu on the Schematic Editor toolbar.
5.
Click
Start Editing Diagram.
29
The editing session starts on the active schematic diagram. Tools and commands available from the
Schematic Editor toolbar are automatically enabled and stay enabled until this diagram is the active one.
The diagram status is locked until the editing session is stopped.
Moving schematic features
Pasos:
1.
Zoom in on the diagram to a set of schematic features. Click the Edit/Move Schematic
Features button and select schematic features by drawing a box with the tool.
2.
Move the selected set of schematic features by dragging and dropping it at another location.
Any editing operation is reversible until the diagram edits are saved. Clicking the Undo tool
on the Standard toolbar reverses the last editing action.
3.
Click the background of the diagram to cancel the feature selections.
Removing schematic features
Pasos:
1.
Click the Edit/Move Schematic Features button and select the set of schematic features
located at the top right corner on the diagram by drawing a box with the tool.
30
2.
Click the Schematic Editor drop-down menu on the Schematic Editor toolbar and click the
Remove Schematic Features menu item.
The selected schematic features are removed.
31
Saving the diagram edits and stopping the editing session
To save edits operated on an active schematic diagram, click the Save Diagram Edits item on the
Schematic Editor drop-down menu. When clicking Save Diagram Edits, all the edits operated on the active
schematic diagram since the edit session was opened or last saved are taken into account and saved in the
schematic database.
Pasos:
1.
Click the Schematic Editor drop-down menu on the Schematic Editor toolbar.
2.
Click Save Diagram Edits.
All the editing operations that have impacted the active schematic diagram content since it was
opened, such as the new geometries and removed features, are now saved.
3.
Click the Schematic Editor drop-down menu on the Schematic Editor toolbar and click
Stop Editing Diagram.
Even if schematic features that are removed or reduced in schematic diagrams are not
displayed any more in the schematic diagram, they are not removed from the schematic tables
during the diagram saving operation. They are flagged as undisplayed in the schematic
database. You can restore these removed or reduced schematic features when updating the
diagram from initial features with the Persist manually removed, reduced or reconnected
32
features option on the Update Diagram dialog box. This option will be detailed in the
Updating Schematic Diagrams exercise.
4.
Remove the Manual Selection data frame from the Table Of Contents.
Rotating a tree
The Rotate Tree command allows you to rotate the tree associated with any schematic feature node
currently selected in a schematic diagram. The value for the rotation angle, as well as the other parameters
applied by the algorithm (for example, the rotation of the tree nodes), is specified on the Rotate Tree tab of
the Schematic Editing Properties dialog box. This command is enabled when an edit session is opened on
the active schematic diagram and there is a single node selected in the active schematic diagram. The
following steps illustrate this command:
Pasos:
1.
Click the Open Diagram by Diagram Template button you added to the Schematic toolbar at
the beginning of the exercise.
The Open Schematic Diagram dialog box appears.
2.
Click the Schematic Diagram Template drop-down list and click GeoSchematic.
3.
Click Feeder 0803-Corinth Church in the Schematic Diagram Name drop-down list.
4.
Click OK.
The diagram appears in a new data frame.
33
5.
Click Schematic Editor and the Start Editing Diagram menu
toolbar.
on the Schematic Editor
6.
You must now select the schematic feature node around which the Rotate Tree command is
going to operate. This selection is going to be operated using the Select By Attributes ArcGIS
standard command on the schematic diagram content.
a. Click Selection on the main menu and click Select By Attributes.
b.
Click the Layer drop-down list and click TransformerBank.
c.
Double-click UOID in the Fields list.
d.
e.
f.
Double-click 950 in the unique values list.
.
34
g.
The TransformerBank schematic feature node whose UOID is 950 is now selected in the
schematic diagram.
7.
Right-click the Feeder 0803-Corinth Church schematic layer in the Table Of Contents,
point to the Schematic Selection menu item, then click Zoom To Selected Schematic
Features.
8.
Click the Select Features tool , hold down the SHIFT key, then click the PrimaryLine located
at the left of the TransformerBank to select it.
The newly selected PrimaryLine will be interpreted as a barrier and prevents the Rotate Tree
command from being executed beyond it. After this step, you should be in the following
situation:
35
9.
Click the Schematic Editor drop-down arrow and click Rotate Tree.
36
Nota: The default rotation angle is 45 degrees. You can set the rotation
angle by clicking Editing Properties from the Schematic Editor
drop-down arrow. Then, click the Rotate Tree tab and type a
number in the Angle (degrees) text box.
10.
Click the Undo tool
to reverse the action.
11.
Click the background of the diagram to cancel the feature selections.
12.
Click Full Extent
on the Tools ArcMap toolbar.
Using the alignment tools
The Align Nodes tools allow you to align horizontally, vertically, or by an angle in a selected set of schematic
feature nodes by moving them along the imaginary axis defined by a reference point that fixes the axis
origin. The following steps explain how these alignment tools work:
Pasos:
1.
Zoom in on a part of the schematic diagram.
2.
Click the Edit/Move Schematic Features button
node.
and click a node to be used as the origin
37
This first selected node, displayed in red, is considered the reference node for the alignment
operations.
3.
Hold down the SHIFT key and click two or three other schematic feature nodes currently
located on different branches and levels of the hierarchical tree.
4.
Click the Schematic Editor drop-down arrow, point to Align Nodes, then click Align Vertical
Center.
The selected schematic feature nodes move vertically to align with the reference node.
38
5.
Click the Undo command
6.
Keep the currently selected set of schematic features, but change the reference node by
holding the CTRL key and clicking one of the selected schematic feature nodes, different from
the reference node.
This newly clicked feature displays in red.
39
7.
Click the Schematic Editor drop-down arrow, point to Align Nodes, then click Align
Horizontal Center.
The selected schematic feature nodes move horizontally to align with the reference node.
40
8.
9.
Keep the set of selected schematic feature nodes and hold the SHIFT key then click a
schematic feature link.
10.
Hold down CTRL key and click the same schematic feature link again.
The vertex highlighted in red on this link is now considered the reference point.
41
11.
Click the Schematic Editor drop-down arrow, point to Align Nodes, then click Align
Horizontal Center.
The selected schematic feature nodes move horizontally to align with the reference vertex.
42
12.
Remove the diagram data frame.
13.
Click No when the following message appears:
Separate overlapping nodes
The Geo - Spatial Dispatch layout algorithm separates schematic feature nodes in their current positions
that are visually close to overlapping in schematic diagrams. This algorithm layout moves the schematic
feature nodes independently of their degree, that is, independently of the numbers of links that connect the
nodes and independently of the links to which they are connected. The Spatial Dispatch algorithm mainly
works with two parameters:
• The Iterations number, which determines the number of Spatial Dispatch algorithm iterations that will
be executed before the final result is shown.
43
•
The Maximum shift distance, which is used to quickly increase the schematic node displacement for
nodes that are very close. The greater this factor is, the more rapidly and strongly the schematic
nodes that are close to overlapping separate.
The following section illustrates this algorithm layout.
Pasos:
1.
2.
During this exercise, you need to use the My Places command. Since this command is not
available by default in the ArcMap toolbars, start with the following steps:
a. Click Customize and click Customize Mode.
The Customize dialog box opens.
b.
Click the Commands tab.
c.
Click Generic in the Categories list.
d.
Click the My Places command and drag it onto the Tools toolbar.
e.
Click Close.
Click the Open Diagram by Diagram Template button .
The Open schematic diagram dialog box appears.
3.
Click the Schematic Diagram Template drop-down list and click GeoSchematic.
4.
Click Feeder 0801-Rice Creek in the Schematic Diagram Name list and click OK.
5.
toolbar.
6.
Click the My Places button you have just added in step 1.
The My Places dialog box opens.
7.
Click the Load button.
8.
Browse to and select the SchematicFeatures_GeoSpatialDispatch.dat file located in
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap and click Open.
9.
Select all the items that have been added to the window and click Zoom To.
After this step, you should be in the following situation:
44
10.
Close the My Places dialog box.
Note that several of the schematic feature nodes are so close that they seem to overlap.
11.
current view:
and, by drawing a box with the tool, select everything in the
45
12.
Click the Layout Task drop-down list on the Schematic Editor toolbar and click Geo - Spatial
Dispatch.
13.
Click the Layout Algorithm Properties button .
The Geo - Spatial Dispatch properties page displays on the Schematic Layout Algorithm
dialog box.
14.
Type 5 in the Iterations number text box. Keep the value set by default for the Maximum
shift distance parameter. Check the Move unselected neighbor nodes check box.
46
15.
Click OK.
16.
Click Apply Layout Task
17.
Click Undo , then click Redo to clearly analyze the difference on the location of the
schematic feature before and after the algorithm execution.
.
47
18.
Click the Layout Task drop-down list on the Schematic Editor toolbar and click Geo - Initial
Positions.
19.
Click Apply Layout Task .
All the selected schematic features are now displayed with their initial geographic geometry.
Squaring links
The Square Links command computes and inserts vertices along schematic feature links' path routes so
these path routes are displayed with right angles. Vertex positions are automatically inserted on link path
routes and are computed according to the following:
• The current position of the schematic feature links' origin and extremity nodes
•
The current position of the vertices if such points already exist along the schematic feature links and
the Preserve Path check box is checked on the Square Links tab of the Schematic Editing
Properties dialog box
The process takes the direction of the links into account when vertices already exist on the schematic
feature links and the Preserve Path check box is checked. In that case, the vertices along the schematic
feature link are each treated in turn, that is, from the first vertex displayed along the link path route to the last
one.
The following section illustrates the Square Links command.
Pasos:
1.
schematic features again.
2.
Click the Schematic Editor drop-down arrow and click Square Links.
and, by drawing a box with the tool, select the same
48
3.
Click the background of the diagram to cancel the schematic feature selections.
4.
5.
Remove the diagram data frame. Click No if the following message appears: The diagram
‘Feeder 0801-Rice Creek’ has been modified. Do you want to save its layout?
Finding overlapping links
The Find Overlapping Links analyst algorithm allows highlighting of schematic feature links contained in a
schematic diagram that are overlapping. Two schematic feature links are said to overlap when they are
connected to the same origin and extremity nodes, have the same number of vertices—the same number of
intermediate link points—and all those vertices overlap.
The following section exemplifies the Find Overlapping Links schematic trace analyst.
Pasos:
1.
Click the Open Diagram by Diagram Template button .
The Open schematic diagram dialog box appears.
2.
Click the Schematic Diagram Template drop-down list and click InsidePlants.
3.
Click Substation 08 in the Schematic Diagram Name list and click OK.
49
4.
Click the Trace Task drop-down list on the Schematic Network Analyst toolbar and click Find
Overlapping Links.
5.
Click the Trace Task Properties button .
The Find Overlapping Links properties page displays on the Schematic Network Analyst
Trace dialog box.
6.
Make sure the Select links option is checked in the Find Overlapping Links properties page.
7.
Click OK.
8.
Click Apply Trace Task .
The schematic feature links that are overlapping are selected and the diagram extent set to the
extent of the trace result.
9.
Click Full Extent
10.
on the Tools ArcMap toolbar.
Click the List By Selection button in the Table Of Contents toolbar.
Four overlapped Inside_BusBar have been selected.
50
Separating overlapping links
The Separate Overlapping Links layout algorithm separates schematic feature links that are overlapping in a
schematic diagram. The algorithm applies the Offset between links parameter as specified on the Separate
Overlapping Links layout algorithm properties page. The Offset between links parameter is combined with
the current symbol size of the nodes displayed in the diagram to compute the distance between two
neighboring links and the distance between the origin/end node and the first/last break point that will be
used during the separation process.
The following section exemplifies the Separate Overlapping Links layout algorithm execution.
General case
Pasos:
1.
toolbar to start an editing session on this diagram.
2.
Click the Layout Task list and click Separate Overlapping Links.
3.
Click the Layout Algorithm Properties button
dialog box.
4.
Type 0.3 for the Offset between links parameter.
to open the Schematic Layout Algorithm
51
5.
Click OK.
6.
The four overlapped links are separated.
7.
Click the List By Drawing Order button
8.
Right-click the Substation 08 schematic diagram layer in the Table Of Contents, then
click Schematic Selection and click
Clear Selected.
in the Table Of Contents toolbar.
52
Other case
The following section exemplifies the Separate Overlapping Links layout algorithm execution. The next
steps illustrate another way of working on the Separate Overlapping Links schematic algorithm layout.
Pasos:
1.
Zoom in to the set of separated links that are displayed at the top of the diagram.
2.
3.
Click the Schematic Editor drop-down menu and click Remove Schematic Vertices so the
and select the topmost separated link.
vertices on the link are removed.
4.
Click the Add Vertex tool
5.
Click and drag a point on this link to create a new vertex on it.
6.
Repeat the operation to create another vertex on that link.
7.
Click the Edit/Move Schematic Features tool
8.
Make sure that the Separate Overlapping Links is still selected in the Layout Task dropdown list.
.
and click that modified link.
53
9.
dialog box.
to open the Schematic Layout Algorithm
10.
Check the Use origin links option.
Checking this option causes the selected schematic feature link to be used as a reference
link for the algorithm execution. In that case, the algorithm copies the vertices that are
displayed along that selected link on the other links that connect the same origin and
extremity nodes and separates those links.
11.
Click OK.
12.
.
54
13.
Click Schematic Editor and click
Stop Editing.
14.
Click No when the following message appears: Diagram has changed. Do you want to save
the edits?
15.
Click Full Extent
16.
Right-click the Substation 08 schematic diagram layer in the Table Of Contents, then
click Schematic Selection and click
Clear Selected.
on the Tools toolbar.
Marking crossing links
Pasos:
1.
2.
Click the Schematic Editor drop-down arrow and click Mark Crossing.
3.
In the Table Of Contents window, under the Substation 08 schematic layer, uncheck and
check again the check box at the left of the CrossMark feature layer to clearly identify the
crossings that are now highlighted.
The next screen shot shows the mark at the identified crossings after their default symbology
has been redefined so they display with a blue triangle.
Start Editing Diagram.
55
4.
Stop Editing.
5.
Click No when the following message appears: Diagram has changed. Do you want to save
the edits?
6.
Remove the Substation 08 data frame.
Enabling the viewer windows mode and the automatic full extent after algorithm
execution
You can enable the Viewer Windows running mode so that each time a diagram is opened or generated, it is
automatically displayed in a viewer window without changing the active data frame. You can also enable the
Full Extent After Algorithm Execution running mode so that each time a schematic layout algorithm is
executed on any schematic diagram's whole content, an automatic full extent is launched at the end of the
algorithm execution. These running modes are enabled from the General tab on the Schematic Options
dialog box:
Pasos:
1.
Click the Schematic menu on the Schematic toolbar and click Schematic Options.
The Schematic Options dialog box opens.
2.
Click the General tab.
56
3.
Check Automatically open schematic diagrams in a viewer window in the Viewer Windows
section.
4.
Make sure the Automatically zoom to full extent after applying a layout task on the entire
diagram check box is checked in the Layout Algorithms section.
5.
Click OK.
The Schematic Options dialog box closes.
From now, each time a schematic diagram is opened or generated, it will be displayed in a viewer
window, and the active data frame will be preserved; each time a schematic layout algorithm is applied on
any schematic diagram's whole content, a full extent will be automatically executed at the end of the
algorithm execution.
Using the Hierarchical - Main Line Tree algorithm
The Main Line Tree layout algorithm arranges hierarchically all the schematic feature nodes and links in the
active schematic diagram along the detected main line and places the schematic features according to the
parameters currently set on the Hierarchical - Main Line Tree tab. If a selected set has been defined in the
active schematic diagram, the algorithm only applies to the selected schematic features. By default, when
no root and end schematic feature nodes are set, the main line is the longest branch of the diagram, that is,
the branch composed of the most schematic feature links. When a schematic feature root node is set, the
57
main line is the branch composed of the most links starting from this root. When a schematic feature end
node is set, the main line is the branch composed of the links ending at this schematic feature end node.
When the schematic feature root and end nodes are set, the main line is the branch composed of the most
links starting from this root node and ending at this end node. In any case, the detected main line is placed
as a central line, and its related branches are placed either on both sides or at the left or right side of it
according to the selected Branch Placement option. In the following section, you'll learn how to operate with
the Main Line Tree algorithm layout.
General case
Pasos:
1.
2.
Navigate to the Feeders schematic folder of the ElecDemo schematic dataset in the
C:\ArcGIS\ArcTutor\Schematics\ Schematics\ElecDemo geodatabase and select Feeder
0804 - Harrison. Click Add.
The diagram opens in a viewer window.
3.
Click Schematic Editor and click the Start Editing Diagram menu
Editor toolbar to start an editing session on this diagram.
4.
Click the Layout Task drop-down arrow and click Hierarchical - Main Line Tree.
5.
Click the Layout Algorithm Properties button and change the Main Line algorithm
properties as follows:
a. Type 6 for the Spacing between nodes perpendicular to the direction.
b.
on the Schematic
Type 20 for the Spacing between nodes along the direction.
6.
Click OK.
7.
Click the Apply Layout Task button
.
58
The algorithm applies, and an automatic full extent is launched at the end of the execution.
8.
Click the Undo button
on the Standard toolbar to revert to the former layout.
9.
Click the Full Extent button
on the viewer window.
Execution with particular root and end schematic feature nodes
Pasos:
1.
In the Table Of Contents, under the Feeder 0804-Harrison schematic layer, right-click the
Substation feature layer and click Selection, then click Select All.
2.
Right-click the Feeder 0804-Harrison schematic layer in the Table Of Contents, click
Schematic Selection, then click Zoom To Selected Schematic Features.
3.
Click the Zoom In tool
4.
window to deselect the substation.
5.
Make sure the Hierarchical - Main Line Tree algorithm is still selected in the Layout Task
drop-down list.
6.
Click the Set Schematic Root tool
will be set as the root of the tree.
It appears with a blue square:
and zoom in to the selected Substation schematic feature.
and click the background of the viewer
and click the Substation schematic feature node so it
59
7.
Specify an end node. Activate the Feeder 0804-Harrison data frame.
8.
Click Selection in the ArcMap menu, then click
9.
Click the Layer drop-down list and click ServiceLocation.
10.
Double-click UOID in the Fields list.
11.
12.
13.
Double-click 1760 in the unique values list.
Select By Attributes.
.
60
14.
The ServiceLocation schematic feature node whose UOID is 1760 is now selected in the
schematic diagram.
15.
Right-click the Feeder 0804-Harrison schematic layer in the Table Of Contents, point to
the Schematic Selection menu item, then click Zoom To Selected Schematic
Features.
16.
window to deselect the ServiceLocation.
17.
Click the Set Schematic End tool
step.
It appears with a green circle:
and click the ServiceLocation identified at the previous
61
18.
window.
19.
Click the Set Schematic Root button to visualize the root node currently specified, then
click Set Schematic End to visualize the currently specified end schematic node.
20.
21.
Click Set Schematic Root to control the root node as the root of the main line, then click
Set Schematic End to control the position of the end node on the main line.
22.
Click Save Diagram Edits on the Schematic Editor menu on the Schematic Editor
toolbar to save the current diagram layout.
23.
node.
on the viewer window toolbar to center the diagram in the
.
to disable the highlighting of the root/end
62
Restoring schematic features' geo - initial positions
To get back to the initial layout of the features, you may execute the Geo - Initial Positions schematic layout
algorithm:
Pasos:
1.
Click the Layout Task drop-down arrow and click Geo - Initial Positions.
2.
All the schematic features in the diagram are restored to their initial position:
Restoring schematic features' saved positions
Pasos:
1.
Click the Layout Task drop-down arrow, then click Force Directed.
2.
All the schematic features in the diagram are restored to their initial position:
63
3.
Click Restore Saved Positions in the Layout Task drop-down menu.
4.
The saved layout of the schematic features is restored.
Removing a schematic diagram’s saved layout from the schematic database
Pasos:
1.
Click the Restore Initial Layout button
The following dialog box displays:
you added at the beginning of the exercise.
2.
Confirm the restoration of the initial layout.
All the schematic features contained in the active diagram are restored to their initial positions.
The diagram layout has been removed from the schematic database. As no layout exists any
more for the diagram, the Restore Initial Layout button is unavailable.
3.
Click Full Extent
4.
Click
5.
Remove the Feeder 0804-Harrison data frame.
Save Diagram Edits on the Schematic Editor menu on the Schematic Editor toolbar.
Detecting loops in a schematic diagram
You can identify loops on your network using the Find Loops schematic trace analyst algorithm.
Pasos:
64
1.
2.
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap\ElecDemo geodatabase and select
Feeder 0801-Rice Creek.
3.
Click the Trace Task drop-down arrow on the Schematic Network Analyst toolbar and click
Find Loops.
4.
Click the Trace Task Properties button
dialog box.
5.
Verify that the Select nodes and Select links check boxes are checked and click OK.
6.
Click Apply Trace Task
7.
8.
Right-click the Feeder 0801-Rice Creek schematic diagram layer in the Table Of
Contents, then click Schematic Selection and click
Clear Selected.
to open the Schematic Trace Task Properties
.
65
Laying out schematic diagram content around a main loop
Like there are loops in the diagram, there is an interesting way to lay out the network around the main loop
by using the Main Ring layout algorithm. The Main Ring layout algorithm arranges the schematic feature
nodes and links in the active schematic diagram around the main ring and lays out hierarchically the
schematic feature nodes and links that connect to the detected main ring's nodes according to the
parameters currently set on the Main Ring tab. The main ring is the longest loop of the schematic diagram,
that is, the loop formed by the most links. If a selected set has been defined in the active schematic
diagram, the algorithm only applies to the selected schematic features.
The following section illustrates how to operate the Main Ring layout algorithm. Note that detecting the loop
like you've just done in the previous section is not a prerequisite for executing the algorithm. If the schematic
diagram contains no loop, the Main Ring layout execution has no effect.
Pasos:
1.
Click the Schematic Editor and click the Start Editing Diagram menu
Editor toolbar to start an editing session on this diagram.
2.
Click the Layout Task drop-down arrow and click Main Ring.
3.
4.
In the Spacing area, type 1 for the Between nodes along the direction parameter, then type
4 for Between nodes perpendicular to the direction.
5.
Click OK.
6.
on the Schematic
.
.
66
The following screen shot shows the result obtained after the algorithm execution and the
symbols in the diagram have been decreased for a better visualization of the main loop:
7.
Click the Undo button
on the Standard toolbar to revert to the former layout.
8.
Close the viewer window.
9.
Activate the Feeder 0801-Rice Creek data frame and click Full Extent
toolbar.
on the Tools
Using the Orthogonal algorithm
The Orthogonal layout arranges the schematic feature nodes and links in the active schematic diagram
orthogonally in a hierarchical order.
Pasos:
1.
In the Table Of Contents, under the Feeder 0801-Rice Creek schematic layer, right-click the
Substation feature layer and click Selection, then click Select All.
2.
3.
4.
window to deselect the substation.
5.
Click the Layout Task drop-down arrow and click Orthogonal.
6.
Click the Set Schematic Root button and click the Substation schematic feature node so it
will be set as the root of the tree.
It displays with a blue square.
and zoom in to the selected Substation schematic feature.
67
7.
Click Full Extent
8.
Click Layout Algorithm Properties .
The Orthogonal properties page displays on the Schematic Layout Algorithm dialog box.
9.
Type 45 for the Counterclockwise rotation angle from vertical.
on the Tools toolbar.
68
10.
Click OK.
11.
.
69
Using the Geo - Partial Overlapping Links algorithm
The Geo - Partial Overlapping Links layout algorithm detects the collinear links or the collinear portions of
links (the link segments) that overlap or nearly overlap in the active schematic diagram and separates them
according to the parameters set on the Partial Overlapping Links tab. The algorithm detects and groups
together the parts of link segments close to each other, more or less parallel, and having more or less the
same length. Each set of segments in the schematic diagram is spread equitably on the left side and the
right side of the middle of the set of segments. The distance between each segment is then equal to the
Offset parameter specified on the Partial Overlapping Links tab. The process preserves the original
orientation of the segments so that a segment laying on the left side of another will still end up on the left
side.
The following section explains how to operate the Geo - Partial Overlapping Links algorithm layout.
Pasos:
1.
2.
Click the My Places button you added in step 1.
The My Places dialog box opens.
3.
Select all the items in the list and click Remove All.
4.
Click the Load button.
5.
Browse to and select the Edges_FindOverlappingLinks.dat file located in
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap and click Open.
6.
Select all the items that have been added to the window and click Zoom To.
7.
Click the Select Features tool and select all the edges that are flashed-in when clicking the
Zoom To button.
After this step, you should be in the following situation:
70
8.
Close the My Places dialog box.
9.
Click Propagate Map Selection To Schematic
.
10.
Activate the Feeder 0801-Rice Creek data frame.
The schematic features associated with the features selected in the map are selected in the
diagram.
11.
71
12.
Click Geo - Partial Overlapping Links in the Layout Task drop-down list and click Layout
Algorithm Properties so the Geo - Partial Overlapping Links properties page opens on the
Schematic Layout Algorithm dialog box. Keep the parameters default values.
13.
Click OK.
14.
.
72
15.
Remove the diagram data frame. Click No when the following message appears: The Diagram
‘Feeder 0801 - Rice Creek’ has been modified. Do you want to save its layout?
16.
17.
Click Bookmarks and click Overview.
Clear Selected Features.
Copying a diagram layout on another diagram
Pasos:
1.
Click the Open Schematic Diagramsbutton .
2.
C:\ArcGIS\ArcTutor\Schematics\ Schematics\ElecDemo geodatabase and select Manual
Selection. Click Add.
The diagram opens in a viewer window.
3.
Click Schematic Editor and click the Start Editing Diagram menu on the Schematic Editor
toolbar to start an editing session on this diagram.
4.
Click the Layout Task drop-down arrow and click Hierarchical - Smart Tree.
73
5.
In the Table Of Contents, under the Manual Selection schematic layer, right-click the
ElectricNetwork_Net_Junctions feature layer, click Selection, then click Select All.
6.
Zoom in on the Electric_Network_NetJunctions schematic feature node at the top of the
diagram.
7.
window to cancel the selection.
8.
Click the Set Schematic Root tool and click this small ElectricNetwork_Net_Junctions
schematic feature node so it is set as the root of the tree.
9.
10.
Click Layout Algorithm Properties .
The Hierarchical - Smart Tree properties page displays in the Schematic Layout Algorithm
dialog box.
11.
Check the From top to bottom option in the Direction area and click OK.
12.
.
74
13.
Right-click the Manual Selection schematic layer in the Table Of Contents, click
Schematic Selection, then click Select All Schematic Features.
14.
Click Propagate Schematic Selection To Map
Geography data frame.
15.
Click the Open Schematic Diagrams button , navigate to the Feeder 0802-Goldmine
schematic diagram stored in the Feeders schematic folder of the ElecDemo schematic
dataset, then click Add.
The schematic diagram opens in a viewer window.
16.
Click Propagate Map Selection To Schematic to visualize the schematic features
contained in Feeder 0802-Goldmine that are associated with the same geographic features.
17.
Right-click the Feeder 0802-Goldmine schematic layer in the Table Of Contents, click
18.
Click the Schematic drop-down menu on the Schematic toolbar and click Clear All Diagram
Selections to deselect all the schematic features currently selected in all schematic diagram
layers.
19.
Right-click the Manual Selection schematic layer in the Table Of Contents and click Copy
Layout.
to visualize the associated features in the
75
The Copy Layout To dialog box opens:
20.
Click Feeder 0802 - Goldmine and click OK.
The position of all the schematic features contained in the Manual Selection diagram are
reported on the schematic features contained in Feeder 0802-Goldmine that are associated
with the same geographic features.
21.
Zoom out to see that the neighbored schematic features have not been impacted.
22.
Close ArcMap.
The Schematics - Save Layouts dialog box opens.
23.
Click the Apply to all option and click No so that no diagram is saved.
24.
Click No again so that the .mxd file is not saved.
76
Exercise 4: Updating schematic diagrams
In this exercise, you will learn how to update schematic diagrams.
Requisito previo:
During this exercise, you will have to work on some schematic diagrams
that were generated in exercise 2 and/or laid out in exercise 3.
Pasos:
Complejidad:
Principiante
ArcGIS
Ruta de datos:
Objetivo:
Learning how to update schematic
diagrams
1.
Start ArcMap.
2.
Open the ElecDemo.mxd file stored in C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap.
Updating a diagram from initial features
Pasos:
1.
Click the Open Schematic Diagrams button on the Schematic toolbar.
2.
Navigate to the C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap\ElecDemo
geodatabase, then double-click the ElecDemo schematic dataset.
3.
Click the Manual Selection schematic diagram and click Add.
The selected diagram appears in a new data frame. This diagram was laid out and saved at
the beginning of the previous exercise.
4.
Click the Schematic drop-down menu on the Schematic toolbar and click
The Update Diagram dialog box opens.
Update Diagram.
The Synchronize against original selection/trace/query option is checked by default. Because
schematic features were manually removed from this schematic diagram since it was
generated, the Persist manually removed, reduced or reconnected features check box is
available. By default, this check box is checked to prevent the schematic features that were
intentionally removed/reduced from the schematic diagram from reappearing and schematic
77
feature links that have been intentionally disconnected and reconnected in the diagram from
being the same way they were at diagram generation.
5.
Keep the Synchronize against original selection/trace/query option checked, but uncheck
the Persist manually removed, reduced or reconnected features check box so these
schematic features display again in the schematic diagram after the update.
6.
Click OK.
7.
Click Full Extent .
The content of the Manual Selection diagram displays like in the below screen shot at the right.
All the schematic features that were removed are restored to their initial positions. The other
schematic features are restored to their saved positions.
8.
Remove the Manual Selection data frame.
Updating a diagram generated from a trace
Pasos:
1.
Click the Open Schematic Diagrams button on the Schematic toolbar, navigate to the
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap\ElecDemo geodatabase,
then double-click the ElecDemo schematic dataset.
78
2.
Click the Feeder 0804-Harrison schematic diagram that was generated from a trace
during exercise 2 and click Add.
The selected diagram appears in a new data frame.
3.
Click Selection on the main menu and click Select By Attributes.
4.
On the Select By Attributes dialog box that opens, click the Layer drop-down list and click
ProtectionDeviceBank.
5.
Double-click BANKTYPE in the Fields list.
6.
7.
Double-click Switch - Switch in the unique values list.
8.
Click the
9.
, then click Get Unique Values.
button, then double-click ENABLED from the fields list.
10.
Double-click 0 - False from the unique values list.
The Select By Attributes dialog box appears with the following query information:
11.
Notice that four switch schematic features resulting from the Select By Attributes function are
now selected in the active schematic diagram. These switches are opened, and the parts of
the network beyond them were not returned from the initial trace. You are now going to close
the geographic switch feature associated with one of these selected schematic features before
updating the diagram and see the impact.
12.
Click Selection on the main menu and click Select By Attributes to reopen the Select By
Attributes dialog box.
79
13.
Click the
button, then double-click UOID in the fields list.
14.
15.
Double-click 1 in the unique values list:
16.
17.
Right-click the schematic layer in the table of contents, click Schematic Selection, then click
Zoom To Selected Schematic Features.
80
18.
Click the Propagate Schematic Selection To Map button
.
19.
Activate the Geography data frame and click Selection, then click the
Features menu.
20.
21.
Click Customize on the main menu and click Customize Mode.
22.
On the Toolbars tab, check the Editor check box and click Close.
The Editor toolbar is now displayed.
23.
Arrange this new toolbar under the main menu.
24.
Click the Editor drop-down menu and click Start Editing.
The Editing window opens.
25.
Make sure the ProtectionDeviceBank is still selected in the map. If it is not, click the Edit tool
on the Editor toolbar and click the ProtectionDeviceBank.
26.
Click the Attributes button on the Editor toolbar.
Zoom to Selected
and zoom in to the selected ProtectionDeviceBank.
The Attributes window opens.
27.
Change the Enabled field from False to True.
28.
Change the Status field from Open to Closed.
81
The blue arrows on the following screen shot show the changes that should have been done at
the end of this step:
29.
Click the Editor drop-down menu and click Save Edits.
30.
Click the Editor drop-down menu again and click Stop Editing.
The Attributes window closes.
31.
Activate the Feeder 0804-Harrison data frame.
32.
Click the Schematic menu on the Schematic toolbar and click
The Update Diagram dialog box appears.
Update Diagram.
Sugerencia: The Update Diagram dialog box also opens when right-clicking the
schematic layer in the table of contents and clicking the Update
Diagram shortcut menu.
33.
Make sure the Synchronize against original selection/trace/query option is checked.
82
34.
Click OK.
The entire content of the schematic diagrams is updated according to the new trace result
based on the trace parameters that were maintained in the schematic database when the
diagram was generated.
35.
Click Full Extent
.
83
Since the switch was closed, the trace goes beyond the switch. Without selecting this new
trace result in the map, Schematics has reexecuted the trace in memory and updated the
diagram accordingly.
36.
Remove the schematic diagram data frame.
Updating a diagram after deleting geographic features
Pasos:
1.
If there are features selected in the map, click the Selection menu and click Clear Selected
Features.
2.
On the Editor toolbar, click the Editor drop-down menu and click Start Editing.
The Editing window opens.
3.
Click Bookmarks on the main menu and click Delete Features.
4.
Click the Select Features tool and select the same set of features as shown in the following
screen shot.
If you click the List By Selection button in the table of contents toolbar, you may have three
selected ServiceLocations, four selected SecondaryLines, and one
ElectricNetwork_Net_Junction:
84
5.
Click List By Drawing Order
.
6.
7.
Navigate to the Feeders schematic subfolder of the ElecDemo schematic dataset in the
C:\ArcGIS\ArcTutor\Schematics\Schematics_In_ArcMap\ElecDemo geodatabase.
8.
Click Feeder 0803-Corinth Church in the diagram list and click Add.
9.
Click the Propagate Map Selection To Schematic button .
The associated schematic features in the active diagram are selected.
10.
Right-click the Feeder 0803-Corinth Church schematic layer in the table of contents,
point to the Schematic Selection menu item, then click Zoom To Selected Schematic
Features.
11.
12.
Click the Edit Tool button and press the DELETE key on your keyboard.
The selected ServiceLocations, SecondaryLines, and ElectricNetwork_Net_Junction are
deleted.
13.
Save the geographic feature edits and stop editing.
85
14.
Activate the Feeder 0803-Corinth Church data frame.
15.
Click Selection in the ArcMap main menu and click Clear Selected Features.
16.
Click the Schematic menu on the Schematic toolbar and click Update Diagram.
The Update Diagram dialog box appears, and the Synchronize against original selection/
trace/query option is checked.
17.
Click OK.
The schematic features that were selected before step 10 in the diagram no longer exist after
the update:
86
18.
Right-click the diagram data frame in the table of contents.
19.
Click Remove.
20.
Expand the Geography data frame in the table of contents.
21.
22.
87

Schematics in ArcMap Tutorial

Transcripción

Documentos relacionados

Geospatial Information Superiority

PDF Flyer - MicroSurvey