pre-delIvery InSpeCtIon CheCklISt – AT150SS
Transcripción
pre-delIvery InSpeCtIon CheCklISt – AT150SS
pre-delivery inspection checklist – AT150SS Dealer Name_______________________________________________________________________________________ Dealer Store Number______________________ Dealer Phone Number_______________________________________ Dealer Address____________________________________________________________________________________ City____________________________________________ State_____________________ Zip_______________________ VIN_________________________________________________________________ Model Year_____________________ Name of Person Performing Set-up____________________________________________________________________ This Section to Be Completed By Dealer: Before allowing a customer to take delivery of this unit, the following items must be verified: Factory Items Installed: Handlebar Final Inspection: Ride Vehicle to Ensure Proper Operation of All System Components Wheels Wash and Dry Vehicle Hub Caps Tail Light Bracket Muffler Discuss With Owner: Fender Braces All On-Product Warnings and Labels Brush Guard Options Installed By Dealer: Warranty and Registration Location and Importance of Operator’s Manual Availabillity and Importance of Certified Training Course I have personally verified that all checked items have been completed. Set-Up Items Completed as Specified in Assembly Guide: Verify Handlebar Torque ______________________________________________ Dealer Representative Verify Wheel Lug Nut Torque Verify Tire Pressure ______________________________________________ Replace Packing Engine Oil Date Charge and Install Battery Verify Fluid Levels Add Gasoline This Section to Be Completed By Owner: The dealer named above has instructed me on the operation, maintenance, safety features, and warranty of this product. I am satisfied with the set-up and inspection of the vehicle and acknowledge that I have read and understand the safety warnings and labels on the unit. I understand the importance of reading, understanding, and following the information contained in the operator’s manual and will watch and thoroughly understand the safety video before operating the ATV. I acknowledge this vehicle is NOT purchased for any person under the age required for the vehicle’s category. Owner Signature_____________________________________________________________________ Date_____________________ Print Owner’s Name___________________________________________________________________________________________ DEALER MUST RETAIN THIS ORIGINAL DOCUMENT WITH VEHICLE FILE. GIVE COPY TO OWNER. © 2010 Baja, Inc. All Rights Reserved. 988000-132 7-2-10 (REV:02) Lista de verificación de inspección – AT150SS Nombre del distribuidor_____________________________________________________________________________ Número de tienda del distribuidor________________ Número de teléfono del distribuidor_______________________ Dirección del distribuidor____________________________________________________________________________ Ciudad_______________________________________ Estado____________Código postal_______________________ VIN_____________________________________________________________ Año del modelo_____________________ Nombre de la persona que realiza el ajuste_____________________________________________________________ Esta sección debe ser completada por el distribuidor: Antes de permitir que un cliente acepte la entrega de esta unidad, se deben verificar los siguientes elementos: Elementos instalados en fábrica: Manubrio Inspección final: Ruedas Tapas de los cubos Lavar y secar el vehículo Soporte para las luces traseras Silenciador Riostras del guardabarros Hablar con el propietario sobre: Protección delantera Todas las advertencias y las etiquetas que se encuentran en el producto Opciones instaladas por el distribuidor: Conducir el vehículo para asegurarse de que todos los componentes del sistema funcionen correctamente Garantía y registro Ubicación e importancia del manual del operador Disponibilidad e importancia del curso de capacitación certificado Ajuste de elementos realizado, según se especifica en la guía de armado: He verificado personalmente que se ha llevado a cabo la revisión de todos los puntos marcados. Verificar el par de torsión del manubrio Verificar el par de torsión de las tuercas de orejeta de las ruedas Verificar la presión de los neumáticos Cambiar el aceite de empaque del motor Cargar e instalar la batería Verificar los niveles de líquidos ______________________________________________ Representante del distribuidor ______________________________________________ Fecha Agregar gasolina Esta sección debe ser completada por el propietario: El distribuidor anteriormente mencionado me ha indicado cómo operar este producto y cómo realizarle el mantenimiento, así como sus características de seguridad y la garantía. Estoy satisfecho con el ajuste y la inspección del vehículo, y reconozco que he leído y comprendo las advertencias y las etiquetas de seguridad que se encuentran en la unidad. Comprendo la importancia de leer, comprender y seguir la información incluida en el manual del operador, y veré y comprenderé totalmente el video de seguridad antes de operar el ATV. Reconozco que este vehículo NO ha sido comprado para una persona menor de la edad que se requiere para la categoría del vehículo. Firma del propietario_________________________________________________________________Fecha_____________________ Nombre del propietario en letra de imprenta_________________________________________________________________________ EL DISTRIBUIDOR DEBE CONSERVAR ESTE DOCUMENTO ORIGINAL CON EL ARCHIVO DEL VEHÍCULO. ENTREGAR UNA COPIA AL PROPIETARIO. © 2010 Baja, Inc. Todos los derechos reservados.