6-speed - Custom Chrome Europe

Comentarios

Transcripción

6-speed - Custom Chrome Europe
TRANNY & CLUTCH
6-SPEED
11
U.S. Patent #6,155,125
RevTech 6-Speed Overdrive Gear Sets with
Trapdoor and Bearings
These complete gear sets have close-ratio 2.94:1 first gears and
.893:1 overdrive sixth gears and come pre-assembled and ready
to bolt into the original equipment transmission cases on most
Big Twin models from 90-06. These kits benefit from all of the
advantages found in the complete RevTech 6-speed transmission assemblies but without the higher cost. They include all of
the parts found in the 6-speed gear sets as well as our RevTech
forged aluminum trap door for strength and durability. Having
the gear set pre-assembled to the trap door simplifies and
speeds up the installation. Each kit also includes a chrome decorative end cover faceplate that bolts to the clutch release cover
that features the distinctive RevTech 6-speed logo laser-etched
into its surface.
658441 Fits Softail models 00-06 and Dyna Glide models 99-05
58345
Fits Evolution Softail & FXR models from 90-99, and Dyna
Glide models from 91-98, as well as Touring models from
90-92
658442 Fits Touring models 99-06
58346
Fits Touring models from 93-98
RevTech Alternate First and Sixth Gears
Bolts Into Stock Case With No Modifications!
Gear
Stock OEM Ratios
DD7 ratios
1st
2nd
3rd
4th
5th
6th
7th
3.34
2.30
1.71
1.41
1.18
1.00
N/A
3.76
2.75
2.06
1.55
1.27
1.10
1.00
U.S. Patent #6,155,125
RevTech 6-Speed Overdrive Gear Sets
Customize gear ratios in RevTech 6-speed transmissions and gear
sets by selecting alternate first and sixth gears. The 3.21 ratio
first gear is the same ratio as the OEM first gear used since 1996
(and comparable to the 3.24 ratio used from 80-95 on domestic
models), while the .860 ratio sixth gear provides even lower
engine RPM at freeway speed.
30440
3.21 ratio 1st gear set
30442
.860 ratio 6th gear set
Note: Installation on 94-Up models with electronic speedometers will require speedometer recalibration. Use CC #310669 and special neutral switch (CC #30439) on
1998 and newer models. Also, when running an electronic speedo, the purchase of a
speedo pickup sensor plate (CC #30438) is required.
6-SPEED
Complete gear sets feature a close-ratio 2.94:1 first gear and .893:1 overdrive sixth gear. They’re de-signed to fit into Original Equipment or aftermarket transmission cases and trap doors with absolutely no modifications. Complete gear sets include mainshaft, countershaft, split bearings,
first thru sixth main and countershaft gears, shift cam, right shift tower assembly, shift forks, main drive gear seal and bearings, snap rings, thrust
washers, main and countershaft nylon-inserted lock nuts, bearings, inner races, trapdoor gasket and a speedo pickup spacer. A chrome-plated billet
6-speed end cover faceplate with the RevTech 6-speed logo laser-etched into its surface is also included (except on CC #58326).
58339
Fits Twin Cam 88 Softail models from 00-06, and Touring & Dyna Glide models 99-06 (except 06 Dyna Glide models)
58320
Fits all Evolution Big Twin models from 90-98 and 99 Softail models
58325
Fits all 5-speed Big Twin models from 85-89
58326
Fits all 5 speed Big Twin models from 80-E84
Note: Installation on 94-Up models with electronic speedometers will require speedometer recalibration. Use CC #310669 and special neutral switch (CC #30439) on 1998 and newer models. Also,
when running an electronic speedo, the purchase of a speedo pickup sensor plate (CC #30438) is required.
11.28

Documentos relacionados