FAMILIA DE COMPRESORES

www.ipic-gsp.com
FAMILIA DE COMPRESORES:
Fabricante LMF
1. PRESENTACIÓN DE LMF
Nuestro representado LMF es el fabricante de compresores líder en Austria y unos
de los más prestigiosos a nivel mundial en compresores de pistón, alternativos, rotativos
y de boil off, para aire, gas natural y otros gases técnicos e industriales en un rango de
potencia de 20 a 3000kW (30 - 4080 hp) y para presiones de hasta 500 bar (7250 psi).
LMF exporta más del 90% de su producción en todo el mundo y para muchas
aplicaciones, principlamente en la industria productora (y distribuidora) del petróleo y el
gas, la industria química, petroquímica, del plástico, y muchas otras.
A continuación presentamos una tabla resumen de la gama de compresores
fabricados por nuestro representado LMF Leobersdorfer Maschinenfabrik AG:
Para más información, puede enviarnos sus consultas o peticiones de oferta por
correo electrónico ([email protected]) o por fax (965-206412).
Asimismo, puede visitar el sitio web del fabricante: www.lmf.at.
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
2. LÍNEAS DE PRODUCCIÓN DE LMF
2.1. AIRCOOLED V-COMPRESSORS
2.2. AIRCOOLED HIGH SPEED BOXER
2.3. COMPOUND COMPRESSOR SYSTEMS
2.4. WATERCOOLED V-COMPRESSORS
2.5. PROCESS GAS COMPRESSORS API 618
2.1. AIRCOOLED V-COMPRESSORS
LMF’s “Heavy Duty” aircooled compressors for air and other gases are designed as two
to five-stage units (in special cases six-stage units), with two to six single-acting,
conventional, deep finned cylinders with capacities up to 5000 ltrs/min (180 cfm) and
for pressures up to 450 bar (6525 psi).
LMF compressor units can be fitted with either a manual control system or one that is
fully automatic, depending on the operating conditions in each case.
Thanks to their sturdy design, LMF compressors are suitable for both intermittent and
continuous operation. They can also be used as booster units with elevated inlet
pressure rates and final pressure rates up to 450 bar (6525 psi).
V16 - 3410 L 5
four stages, single-acting,
aircooled cylinders
delivery 1,4 m³/min (50 cfm),
working pressure 50 bar (725 psi),
electric motor 18,5 kW (25 hp)
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
V17 -5518 L 35
five stages, single-acting,
aircooled cylinders
delivery 2580 ltrs/min (91 cfm),
working pressure 350 bar (5075 psi),
driven by 75 kW (100 hp) electric motor
V7d - 1216 L 0.8
one stage, double-acting,
aircooled cylinders
delivery 342 Nm³/h (215 scfm),
working pressure 8 bar (120 psi),
driven by 37 kW (50 hp) electric motor
2.2. AIRCOOLED HIGH SPEED BOXER
LMF’s aircooled high speed boxer compressors for air, natural gas, technical and
industrial gases are designed for speeds up to 1800 rpm and a maximum power
consumption of 100-1000 kW (136-1360 hp).
The cylinders used are double acting or step cylinders with hardened inner surface.
These compressor units provide smooth running characteristics and require low space
due to their compact design with balanced-opposed arrangement.
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
BT4 Aircooled High Speed Boxer
Bare compressor BT4 – 4429 L/W 20
four cylinders, four stages, single-acting,
aircooled cylinders, watercooled coolers
delivery 8,5 m³/min (300 cfm),
working pressure up to 150 bar (2175 psi)
BS 102 / BS 302
Aircooled High Speed Boxer
BS 204 / BS 604
Aircooled High Speed Boxer
2.3. COMPOUND COMPRESSOR SYSTEMS
LMF compound compressor units are intended for use in all situations where little space
is available, where weight must be kept to a minimum, but where high output capacities
and high final pressures are required.
This type of compressor is a combination of a screw compressor and a piston
compressor, with a common prime mover – diesel or electric - situated between them.
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
LMF compound compressors are available as stationary units for on/off-shore
operation, or as mobile units mounted on trucks or trailers. By covering a power range
of up to 1150 kW (1600 hp), the compressor units provide final pressures of up to 400
bar (5800 psi) and output capacities from 24 m³/min (800 cfm) to 70 m³/min (2480
cfm).
All LMF compressors bear the fruit of LMF’s experience in having built more than 400
compound compressor units since 1980, for clients all over the world.
BT Compound Compressor Systems
Portable compound compressor unit LMF 20/138-150 Ds
including HP air receivers, HP air control valve, seawater supply pump
and special manifold with 32 HP outlets
VC/VCS Compound Compressor Systems
LMF 57/138-207 E with sea-/freshwater heat exchanger
delivery 57 m³/min (2000 cfm), working pressure 138-207 bar (2000-3000
psi),
driven by 1100 kW (1490 hp) electric motor (690 V, 60 cps, watercooled)
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
Nitrogen Compound
Compressor Systems
Truck-mounted nitrogen unit
LMF 47-20/250 D
with HP compressor VC-3221
W 25
and nitrogen (air)/air heat
exchanger,
driven by 12 cyl. 900 kW (1220
hp) diesel engine,
containerized for ambient
temperatures +35/-50 °C
2.4. WATERCOOLED V-COMPRESSORS
LMF’s watercooled compressors for air and other gases are designed as three to fivestage units (in special cases one, two or six-stage units) with capacities up to 25 m³/min
(880 cfm) and for pressures up to 450 bar (6525 psi).
The two to six cylinders can either be single-acting trunk piston cylinders, or step
cylinders and double-acting cylinders with crossheads.
In each stage, both the cylinder and the compressed gas are watercooled, either by
means of an "open" system (continuous flow system) or a "closed circuit" (coolant
circulating through heat exchanger).
VC Watercooled V Compressors
Compressor block VC
two watercooled cylinders,
double-acting, up to four stages
(mainly as booster with two to three
stages)
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
VCS/VCL
Watercooled V Compressors
Compressor block VCS /VCL
four watercooled cylinders,
double-acting, up to five stages
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
2.6. PROCESS GAS COMPRESSORS API 618
LMF process gas compressors meet the API 618 requirements and are used for gases
and gas compositions in chemical and petrochemical processes as well as for boil-off
gases, and in low-temperature applications.
Specialized in package units - ready for operation – LMF offers compressors with up to
six compression stages, inlet capacities from less than 100 to 22000 m³/h (13000 cfm)
and final pressure rates up to 250 bar (3600 psi) with oil-free compression as well as
450 bar (6525 psi) with oil lubricated cylinders.
T 91-93
Process Gas Compressors
Watercooled HP compressor unit
T 93 – 319 N 5.1
three stages, non-lubricated, V-belt
driven,
for compressing nitrogen,
capacity 800 Nm³/h (490 scfm),
working pressure 51 bar (740 psi)
T 121-123
Process Gas Compressors
Watercooled HP compressor unit
T 122 – 224 N 3
two stages, non-lubricated, direct
driven,
for compressing hydrogen mixture,
capacity 3390 Nm³/h (2070 scfm),
working pressure 30 bar (440 psi)
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
T 151-153
Process Gas Compressors
Watercooled HP compressor unit
T 152 – 121 N 2.9
one stage, non-lubricated, direct driven,
for compressing ethylene,
capacity 11190 Nm³/h (6820 scfm),
working pressure 30 bar (440 psi)
T 181-183
Process Gas Compressors
Watercooled HP compressor unit
T 183 – 357 N 1.1
three stages, non-lubricated, direct driven,
for compressing carbon monoxide,
capacity 3325 Nm³/h (2030 scfm),
working pressure 11 bar (160 psi)
B 92-94
Process Gas Compressors
Watercooled HP compressor unit
B 91 – 108 S 6.1
one stage, min-lubricated, direct driven,
for compressing hydrogen (recycle sour
service),
capacity 470 Nm³/h (290 scfm),
working pressure 61 bar (870 psi)
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
B 122-124
Process Gas Compressors
Watercooled HP compressor unit
B 122 – 314 N 6.6
three stages, non-lubricated, V-belt,
for compressing carbon dioxide,
capacity 3490 Nm³/h (2160 scfm),
working pressure 66 bar (960 psi)
B 152-154
Process Gas Compressors
Watercooled HP compressor unit
B 154 – 255 S 2.1
two stages, lubricated, direct driven,
for compressing hydrocarbon gas
mixture,
capacity 9780 Nm³/h (5965 scfm),
working pressure 21 bar (308 psi)
B 182-184
Process Gas Compressors
Watercooled HP compressor unit
B 182 – 212 N 16.3
two stages, non-lubricated, direct driven,
for compressing hydrogen,
capacity 3740 Nm³/h (2320 scfm),
working pressure 163 bar (2320 psi)
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]
www.ipic-gsp.com
B 252-256
Process Gas Compressors
Watercooled HP compressor unit
B 252 – 124 S 8.7
one stage, min- lubricated, direct driven,
for compressing hydrogen,
capacity 44680 Nm³/h (27760 scfm),
working pressure 87 bar (1260 psi)
V 92-94 / V 122-124
Process Gas Compressors
Watercooled HP compressor unit
V 122 – 316 N 6.6
three stages, non-lubricated, V-belt driven,
for compressing nitrogen,
capacity 1655 Nm³/h (1020 scfm),
working pressure 66 bar (960 psi)
IPIC GSP S.L. – Plaza Calvo Sotelo 3 – 03001 Alicante
Tels. 965-213878 / 145375 – Fax 965-206412 – E-mail: [email protected]