da-wm1400 installation manual

DA-WM1400 INSTALLATION MANUAL
This manual is intended for users of the DA-WM1400 wall mounting
bracket. It includes instructions for mounting the DA-WM1400 wall
mounting bracket to a wall.
•This bracket is intended to be used with DC-S series model of
cameras. Do not use it with other models of cameras.
•This installation should be performed by a qualified service
personnel in conformance to all local codes.
•You may need to reinforce the wall. If the wall is not strong
enough to support the camera, the camera may fall.
•Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1
2
Mount bracket to the wall.
Insert cables from external devices, network and power adapter into bracket.
Bracket
Bracket
or
Cable
Cable
Connect your camera to the bracket as follows:
3
Connect the camera to the bracket by
turning the universal nut.
Do not turn the camera but
turn the universal nut when
connecting the camera to the
pipe, otherwise, the cable will
be twisted.
4
Bracket
Universal Nut
Cable
Turn on power.
Camera
Dimensions
Unit: mm (inch)
.4
3)
116 (4.57)
PF 1.5 Inch
140 (5.51)
Ø
116 (4.57)
90 (3.54)
11
(0
264 (10.39)
3/4 PS Inch
IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
Ver.1.0