sp-910den proyector acústico
Transcripción
sp-910den proyector acústico
PROYECTOR ACÚSTICO MANUAL DE INSTRUCCIONES SP-910DEN ATENCION: . La instalación debe ser realizada por personal técnico cualificado. . Conectar en paralelo los altavoces a los terminales de salida correspondientes del amplificador. . Asegurarse de que todos los altavoces tengan la misma polaridad. . No cambiar la toma del transformador mientras el altavoz está en funcionamiento. . No exponer el equipo a fuentes de calor, ni a la llama. CARACTERÍSTICAS Modelo Altavoz Potencia RMS Selección de potencia 100 V Impedancia Sensibilidad Presión Acústica Sensibilidad EN54-24 Respuesta en frecuencia Cobertura 1kHz / 4kHz Temperatura de trabajo Grado de protección Dimensiones (mm) Peso Acabado Color Selección de potencia Normativa EN54 SP-910DEN 2 x 5” 10 W 10 W, 6 W, 3 W y 1,5 W 1 kΩ, 1k6 Ω, 3k3 Ω y 6k6 Ω 95,3 dB SPL a 1 W IEC268-5 105,3 dB SPL a 10 W IEC268-5 75,6 dB SPL a 1 W / 4 m 79 ~ 17500 Hz 149º / 63º (-6 dB) -20ºC ~ +90ºC IP66 165 x 200 x 162 2,35 kg Aluminio, rejilla metálica Blanco (RAL9010) Por cables (terminal cerámico) EN 54-24:2008 Ref. No.: 014-16 ID-Code: OPT-LS14 1438/CPR/XXXX Loudspeaker for voice alarm systems for fire detection and fire alarm systems for buildings Sound projector, 10W, Type B CE-Symbol according 93/68EWG Otras normativas Especial VA. Cumple con BS-5839, parte 8. GUÍA DE INSTALACIÓN Impedancia 1k Ω 1k6 Ω 3k3 Ω 6k6 kΩ – SP-910DEN Versión 1.0 1/1 100 V 10 W 6W 3W 1,5 W Común 70 V 5W 3W 1,5 W 0,75 W Común Color Marrón Rojo Blanco Verde SOUND PROJECTOR INSTRUCTION MANUAL SP-910DEN WARNING: . Installation by qualified personnel only. . Speakers must be wired in parallel and connected to the correct line terminals of amplifier. . Ensure that all speakers have the same polarity with respect to each other. . Do not select another tapings if the speaker is in use. . No naked flame sources, such as lighted candles, should be placed on the apparatus. SPECIFICATIONS Model Loudspeaker Rated Power (RMS) Power Taps 100 V Impedance Sensitivity SPL Sensitivity EN54-24 Freq. Response Dispersion 1kHz / 4kHz Operating temperature Protection range Dimension (mm) Weight Finish Colour Power selection EN54 standard SP-910DEN 2 x 5” 10 W 10 W, 6 W, 3 W & 1.5 W 1 kΩ, 1k6 Ω, 3k3 Ω & 6k6 Ω 95.3 dB SPL at 1 W IEC268-5 105.3 dB SPL at 10 W IEC268-5 75.6 dB SPL at 1 W / 4 m 79 ~ 17500 Hz 149º / 63º (- 6dB) -20ºC ~ +90ºC IP66 165 x 200 x 162 2.35 kg Aluminum, metallic grille White (RAL9010) By cables (ceramic block) EN 54-24:2008 Ref. No.: 014-16 ID-Code: OPT-LS14 1438/CPR/XXXX Loudspeaker for voice alarm systems for fire detection and fire alarm systems for buildings Sound projector, 10W, Type B CE-Symbol according 93/68EWG Other standards VA special. In compliance with BS-5839, part 8. INSTALLATION GUIDE Impedance 1k Ω 1k6 Ω 3k3 Ω 6k6 kΩ – SP-910DEN Version 1.0 100 V 70 V 10 W 5W 6W 3W 3W 1.5 W 1.5 W 0.75 W Common Common 1/1 Colour Brown Red White Green
Documentos relacionados
manual - Optimus
WARNING: . Installation by qualified personnel only. . Speakers must be wired in parallel and connected to the correct line terminals of amplifier. . Ensure that all speakers have the same polarity...
Más detalles