Características Usamel
Transcripción
Características Usamel
USAMEL es un tablero aglomerado de partículas estándar recubierto, mediante la acción de presión y temperatura, con papel melamínico. USAMEL tiene unas características superficiales tales que no necesita de posteriores tratamientos para su aplicación y lo hacen especialmente apto para su uso en todo tipo de mobiliario. Nuestra amplia gama de diseños combinados con los distintos acabados posibles satisface las necesidades de la industria del mueble y decoración y nos permiten estar en la vanguardia del mercado. Por sus especiales características superficiales o por la aplicación a la que van destinados tenemos: • USAMEL POSTFORMABLE: Tablero recubierto con un papel barrera entre el tablero base y el papel decorativo melamínico, que le confiere unas propiedades para un óptimo posformado del material. • USAMEL OVERLAY: Tablero melamínico con una hoja de papel overlay en la superficie que le hace presentar una mejor resistencia a la abrasión y al impacto. Dependiendo de la calidad del tablero base tenemos diferentes tipos de tablero recubierto (ver tabla izda.). Según la resistencia a la abrasión (WR) tenemos diferentes clases de tablero (ver tabla dcha.) Las características físico-mecánicas y superficiales para USAMEL ESTÁNDAR se basan en las recogidas en la norma UNE-EN 14322. USAMEL is a standard particleboard coated, using heat and pressure, with melamine paper. Due to its excellent surface characteristics, USAMEL doesn’t need additional treatments for its application and is specially suitable for its use in all kind of furniture. Our wide variety of designs in combination with the different finishes satisfies the needs of the furniture and decoration industry and allow us to be in the vanguard of the market. Due to its specially surface characteristics or for its future application we have: • USAMEL POSTFORMABLE: Particleboard coated with a barrier paper between the particleboard and the decorative paper, which give it properties for an optimum postforming. • USAMEL OVERLAY: Melamine faced board with an overlay paper sheet on the surface improving the abrasion and the impact strength. Depending on the quality of the base board we have different kinds of covered boards (See left table). Based on the wear resistance (WR), we have different classes of board (see right table) The physical, mechanical and surface characteristics for USAMEL STANDAR are in concordance with UNE-EN 14322 standard. TABLERO BASE/BASE BOARD TUROPAN ESTÁNDAR FORTYPAN FLOXPAN TUROPAN TP MDF CARACTERÍSTICA/ CHARACTERISTIC TOLERANCIA EN ESPESOR/ THICKNESS TOLERANCE – Respecto al nominal/ Relative to the nominal value – En un tablero/ within the board TOLERANCIA DIMENSIONAL/ DIMENSIONAL TOLERANCE - dimensiones comerciales/ commercially avalaible size - tableros cortados a medida/ pre-cut panels TABLERO RECUBIERTO/ COVERED BOARD USAMEL USAMEL FORTY USAMEL FLOX USAMEL TP FIBRAMEL Método de ensayo/ Test method EN 14323 Producto / Product USAMEL Y FIBRAMEL Diseños USAMEL Y FIBRAMEL Unicolores y Overlay diseños USAMEL Y FIBRAMEL Overlay unicolores Unidad/ Unit mm Clase/ Class IP nº vueltas/ revolutions WR nº vueltas/ revolutions 1 < 50 < 150 3A ≥ 150 ≥ 350 3B ≥ 250 ≥ 650 Requisitos/Requirements Rango de grosor/Thickness range (mm, nominal) < 15 ≥ 15 a 20 Clase 1/ Class 1: ± 0.3 Clases 3A - 3B y acabados brillantes/ + 0.5 Classes 3A - 3B and gloss finishes: - 0.3 > 20 ± 0,5 t max – t min ≤ 0,6 EN 14323 ±5 mm ± 2,5 Planitud / Flatness EN 14323 Daños en los cantos/ Edge damaged - dimensiones comerciales/ commercially avalaible size - tableros cortados a medida/ pre-cut panels EN 14323 mm/m - ≤ 2 (solamente para los revestimientos equilibrados) / (only for balanced surfaces) ≤ 10 mm/m mm2/m2 Defectos de aspecto/ Surface defects EN 14323 mm/m2 Resistencia al rayado/ Resistance to scratching EN 14323 N Grado/ Resistencia a las manchas/ Resistance to staining EN 14323 Rating Resistencia al agrietamiento/ Resistance to Grado/ EN 14323 cracking Rating Aspecto del color/ Grado/ EN 14323 Colour matching Rating Acabado superficial/ Grado/ EN 14323 Surface texture Rating Las propiedades físico-mecánicas serán las que correspondan al tablero base The physical-mechanical properties will be the properties of base board. ≤ 3 Puntos/ points ≤ 2 Longitud/ length ≤ 20 ≥ 1,5 ≥ 3 ≥ 3 Grado 4 (Pequeñas diferencias) / Rating 4 (Slights deviations) Metalizados y nacarados: Grado 3 / Pearl and metallic: Rating 3 Grado 4 (Pequeñas diferencias) / Rating 4 (Slights deviations)