Master-Nit II Relax Dryer

Transcripción

Master-Nit II Relax Dryer
Español al Reverso
Master-Nit II
Relax Dryer
Navis Global
World Headquarters
113 Woodside Drive
Lexington, North Carolina 27292
PHONE
336-956-6444
TOLL FREE 866-882-3839
FAX
336-956-1795
www.navistubetex.com
Master-Nit II
Relax Dryer
Navis TubeTex
Equipment
The Master-Nit Relax Dryer for tubular and open width fabrics is the right size for the right job.
The Master-Nit II is 3 passes and carries the fabric without tension between two belts on each
pass through the dryer. Each pass is active with heated air and nozzles. Maximum overfeeding
is accomplished by overfeeding at two locations. The infinitely incremental adjustment of
overfeed provides the Master-Nit II with maximum relaxation and drying at all points on the
•Pads
• Tensionless Dryers
• Tubular Shrinkage Control
• Stenter for Knit, Woven,
Nonwoven, Technical
• Open-Width Knit
Shrinkage Control
dryer. The nozzle arrangement and angle provides the optimal tumbling-shrinking effect.
Fabric hand is softer and bulkier after the drying operation.
The dryer is easy to operate and maintain, too, because all the drives are controlled by inverters.
And depending on the configuration, you can achieve a production level of from 3 to 20 tons a day.
A proud heritage.
An innovative approach.
A global network.
We are Navis TubeTex. Founded in 1929, Navis TubeTex is a leader in finishing
the global knit, woven, nonwoven, technical and geotextile industries.
CONVEYOR DEVICE
2HP INV. x 3
PLAITER UNIT
1 HP INV.
RING GUIDE
DRAW-OFF ROLLER
1 HP INV.
450
1500
2000x3Chambers+190=6190
1200
1200
10540
machinery for the global textile industry. Based in Lexington, North Carolina, USA,
Navis TubeTex designs, engineers and manufactures the world’s leading machinery for
EXHAUST FAN
5 hp
OVER-FEED ROLL
1 HP INV.
CIRCULATION FAN
40HP x 3 INV.
HOT AIR FILTER
Master-Nit II 3 Zone
AIR
DANCER
• Entrada con rama de agujas (PTE) - Procesamiento de Telas
Opciones:
Características Especiales:
mm (118 pulgadas)
AIR DANCER
1200
• Ancho Estándar de Banda 2500 mm (98 pulgadas) and 3000
HOT AIR FILTER
2000*3 CHAMBERS+190=6190 1200
Quemadores a Gas
1500
• Opciones de Calentamiento: Vapor, Aceite Circulante,
Master-Nit II 3 Zone with PTE and Pad
CIRCULATION FAN
40HP x 3 INV.
3600
• Flujo de Aire Uniforme para maximizar el ancho total de la
800 1250
PLAITER UNIT
1HP INV.
CONVEYOR DEVICE
2HP INV. x3
• Exhaust Air Humidity Control – Maintains constant exhaust
• Pin Tenter Entry (PTE) – Processing Open-Width fabrics by
secadora y la capacidad de producción
2180
FABRIC SUPPORT ROPE
1/2HP INV.
RING GUIDE
air saturation, reducing energy used per unit produced.
• Operator Touchscreen Interface with Alarm Reporting
• Uniform Airflow to maximize full width of dryer and
Special Options:
• Standard Belt Width 2500 mm (98 Inch) and 3000 mm
• El Máximo Encogimiento
MANGLE PADDER
10HP INV.
19730
1810
2675
DROP-OFF ROLLER
1HP INV.
CENTERING
AIR
ROLL
DANCER
1HP INV.
OVER-FEED ROLL
1 HP INV.
reducing energy consumption.
air flow and electricity for lighter fabrics thereby,
• AC Inverter Circulation Fans – Allows reduction of
• Manual Lint Belt Cleaning System
• Maximum Tumbling Effect
production capacity
• Heating Options: Steam, Thermal Oil, Gas Burners
spreading and relaxing
(118 Inch)
Special Features:
Abiertas ensanchando y relajando
• Pantalla Táctil de Interfaz para el Operador con Reporte de
Alarma
• Control de Humedad en el Escape de Aire - Mantiene la
saturación del aire de escape constante, reduciendo la energía
utilizada por unidad producida.
• Sistema manual de limpieza de la banda de pelusa
• Ventiladores de Circulación con Inversores de CA - Permite
la reducción del flujo de aire y electricidad para las telas más
ligeras, reduciendo el consumo de energía.
OVER-FEED ROLL
1 HP INV.
CENTERING
AIR
ROLL
DANCER
1HP INV.
CONVEYOR DEVICE
2HP INV. x3
RING GUIDE
PLAITER UNIT
1HP INV.
FABRIC SUPPORT ROPE
1/2HP INV.
DROP-OFF ROLLER
1HP INV.
2675
1810
2180
800 1250
3600
1500
2000*3 CHAMBERS+190=6190 1200
1200
19730
MANGLE PADDER
10HP INV.
HOT AIR FILTER
CIRCULATION FAN
40HP x 3 INV.
AIR DANCER
Master-Nit II 3 Zone with PTE and Pad
Navis Global
World Headquarters
113 Woodside Drive
Lexington, North Carolina 27292
PHONE
336-956-6444
TOLL FREE 866-882-3839
336-956-1795
FAX
www.navistubetex.com
Master-Nit II
Secadora Relajadora
La Secadora Relajadora Master-Nit II para tejido tubular y abierto es del tamaño correcto para
el trabajo correcto. La secadora Master-Nit II es de 3 pasos y lleva la tela sin tensión entre dos
bandas en cada paso a través del secador. Cada paso está activo con aire caliente y toberas.
La máxima sobrealimentación se logra en dos puntos. El ajuste infinitamente incremental
de sobrealimentación le brinda a la Master-Nit II la posibilidad de dar a la tela la máxima
relajación y secado en todos los puntos de esta. La disposición de las toberas y su ángulo
Los Equipos
de Navis Tube Tex
•Foulards
• Secadoras sin Tensión
• Control del Encogimiento
en Tubular
• Ramas para Tejido de
Punto, Tejido Plano, NoTejidos, Tejidos Técnicos
• Control del Encogimiento
en Abierto
proporcionan el efecto óptimo de secado a tambor-encogimiento. El toque de la tela es más
suave y voluminoso después de la operación de secado.
La secadora es fácil de operar y mantener, también porque todos los mandos son controlados
por inversores. Y dependiendo de la configuración, se puede lograr un nivel de
producción de 3 a 20 toneladas por día.
Una orgullosa herencia.
Un acercamiento innovador.
Una red global.
Somos Navis Tube Tex. Fundada en 1929, Navis TubeTex es un líder en
OVER-FEED ROLL
1 HP INV.
EXHAUST FAN
5 hp
CONVEYOR DEVICE
2HP INV. x 3
PLAITER UNIT
1 HP INV.
RING GUIDE
DRAW-OFF ROLLER
1 HP INV.
450
1500
2000x3Chambers+190=6190
1200
1200
10540
maquinaria de acabado para la industria textil global. Con sede en Lexington, Carolina del
Norte, EE.UU., Navis TubeTex diseña, planifica y fabrica la maquinaria líder en el mundo
para las industrias pioneras en tejido de punto, tejido plano, no- tejido y geo-textil.
CIRCULATION FAN
40HP x 3 INV.
AIR
DANCER
HOT AIR FILTER
Master-Nit II 3 Zone
Over for English
Master-Nit II
Secadora
Relajadora

Documentos relacionados

Master-Nit II Secadora Relajadora

Master-Nit II Secadora Relajadora La secadora es fácil de operar y mantener, también porque todos los mandos son controlados producción de 3 a 20 toneladas por día.

Más detalles