front rear - Orbit Irrigation Products
Transcripción
front rear - Orbit Irrigation Products
FRONT REAR Pro Flo™ Zinc Mechanical Water Timed Watering: Turn dial clockwise and align the desired number of minutes with the TIME INDICATOR. To turn off before time runs out, rotate the dial back to 0 and push up on the release lever to turn off. TIMER Manual (Non Timed) Watering: Depress the RELEASE LEVER and rotate dial counter clockwise to “Manual On”. Water will stay on unless you turn it off. Rotate back to “0” and push up on release lever to turn water off. Riego con temporizador: Gire el selector en dirección de las manecillas del reloj y alinee el número deseado de minutos con el INDICADOR DE TIEMPO. Antes de que se termine el tiempo, gire el selector a 0 y presione la palanca de liberación para apagarlo. Riego manual (sin temporizador): Baje la PALANCA DE LIBERACIÓN y gire el selector en dirección contraria a las manecillas del reloj a la posición “Manual On”. El sistema de riego permanecerá encendido a menos que lo apague. Gire el selector a “0” y presione la palanca de liberación para apagarlo. Temporizador de zinc riego mecánico Up to 20% greater flow Flujo hasta un 20% mayor WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and other reproductive harm. For outdoor use with cold water only. Para uso en exteriores con agua fría solamente. ADVERTENCIA: Este producto contiene sustancias químicas reconocidas por el estado de California como causantes de cáncer defectos congénitos y otros daños en el aparato reproductivo. 6.4375 [ 163.51] 1 62041-03 rA Orbit Irrigation Products, Inc. North Salt Lake, UT 84054 ® © 2015 Orbit Irrigation Products, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. MODEL/MODELO 62041 Garantía de 5 años Made in China Hecho en China Customer Service 1.800.488.6156 orbitonline.com OUTLET Salida 5 Year Warranty 6.4375 [ 163.51] 4.25 [ 107.95] 4.25 [ 107.95] Orbit ® 1.801.299.5555 orbitonline.com C M Y K DATE: 06/09/2015 DESIGNER: NK MARKETING: AY Dieline Dims./ Callout Fold Cut Margin PMS 349 PMS 194 PMS 0000 PMS 0000 Folded Flat ARTWORK №: 62041-03 rA L: 000.000" W: 4.25" SOFTWARE: Adobe Indesign CS6 H: 6.4375" W: 8.5" H: 6.4375" Glue PRINTERS ARE REQUIRED TO MATCH ALL SPECIFIED PMS COLORS. Additional Information ∙ ∙ ∙ ∙ Printers are responsible for meeting print production requirements. Any changes must be approved by Orbit®. Printed piece must meet designated specifications on this form. © 2014 Orbit Inc. This work is the property of Orbit®, and cannot be used, reproduced or distributed in any way without their express permission.