Portable Power Bank PB11000 www.V7
Transcripción
Portable Power Bank PB11000 www.V7
Portable Power Bank PB11000 www.V7-world.com User Manual Bedienungsanleitung Manuel d’utilisation Thank you for purchasing the V7 power bank. Please read this user manual to ensure a safe and satisfactory operation. Keep it for future reference. Vielen Dank, dass Sie die V7-Power-Bank gekauft haben. Um den sicheren und zufriedenstellenden Betrieb zu gewährleisten, lesen Sie sich diese Gebrauchsanweisung bitte durch und bewahren Sie sie sorgfältig auf. un usage ultérieur. LED Capacity: 1 Light on: 0-25% 2 Lights on: 25-50% 3 Lights on : 50-75% 4 Lights on: 75-100% Micro USB Input turn on the power bank. The power LED indicator lights will turn on showing you the remaining power automatically after 10 seconds. USB Outputs Drücke Sie den Ein-Aus-Schalter, um die Anzeige einzuschalten. Die LED-Ladestandsanzeige leuchtet auf und zeigt die verbleibende Stromladung an. Die Leuchten schalten sich nach 10 Sekunden automatisch wieder aus. Ladestandsanzeige: 1 Light on: 0-25% 2 Lights on: 25-50% 3 Lights on : 50-75% 4 Lights on: 75-100% LED de capacité : 1 voyant allumé : 0-25 % 2 voyants allumés : 25-50 % 3 voyants allumés : 50-75 % 4 voyants allumés : 75-100 % Entrée micro-USB USB Ausgang Micro USB Eingang Ein/Aus Schalter LED Flashlight Flash LED LED Taschenlampe the button again for 3 seconds. Charging the power bank: Plug the micro USB connector of your charging cable into the “Micro USB Input ” on the power bank, then plug the USB connector on the cable to the USB port of your power source (Figure 1: Wall adapter or Figure 2: USB Port of the computer) Charging your device: Plug the USB connector of the cable that came with your device into the “USB Output”. Connect the other end of this cable into your device. (Figure 3) The charging process will start automatically. After 20 seconds the power indicator will Sortie USB Marche/Arrêt alimentation électrique LED-Taschenlampe: Halten Sie den Ein-Aus-Schalter 3 Sek. lang gedrückt. Zum Ausschalten der Taschenlampe die Taste abermals 3 Sekunden gedrückt halten. LED Flashlight: Capacity: 3.7V/11000mAh Input Voltage: DC 4.75~5.25V Input Current: 2000mAh Rated Output Voltage: DC 5.0V+/- 0.25V Output Current: 1000mAh/2000mAh Charge time to full capacity: 6-8 hours. Vous avez acheté le power bank V7 et nous vous en remercions. Veuillez lire le présent Stecken Sie den Micro-USB-Stecker Ihres Ladekabels in den Micro-USB-Eingang der Power Bank und stecken Sie dann den USB-Stecker des Kabels in den USB-Anschluss Ihrer Stromquelle (Abb.1: Netzadapter oder Abb. 2: USB-Anschluss des Computers). Abbildung 1: Abbildung 2: Netzadapter am Computer Abbildung 3: Gerätes Appuyez sur le bouton « Marche/Arrêt alimentation électrique » pour allumer le dispositif. L’indicateur d’alimentation électrique par LED s’allume et vous indique la capacité d’alimentation électrique restante. Les voyants s’éteignement automatiquement au bout de 10 secondes Flash LED : Appuyez sur le bouton « Marche/Arrêt alimentation électrique » pendant 3 appuyez de nouveau sur le bouton pendant 3 secondes. Chargement du power bank : Branchez le connecteur micro-USB de votre câble de chargement dans l’« entrée micro-USB » du power bank, puis branchez le connecteur USB du câble au port USB l’ordinateur) Adaptateur mural port USB de l’ordinateur Chargement de votre appareil Stecken Sie den USB-Stecker des mit Ihrem Gerät mitgelieferten Kabels in den USB-Ausgang und das andere Ende dieses Kabels in Ihr Gerät (Abbildung 3). Der Ladevorgang beginnt automatisch. Nach 20 Sekunden schaltet sich die Power-Anzeige aus und in den Energie- sparmodus. Chargement de votre appareil: Branchez le connecteur USB du câble livré avec votre appareil dans la «sortie USB». Connectez l’autre extrémité de ce câble à votre appareil. (Figure 3) Le processus de chargement démarre automatiquement. Au bout de 20 secondes, l’indicateur d’alimentation électrique s’éteint et passe au mode Économie d’électricité Technische Daten: Kapazität: 3,7 V/11000 mAh Eingangsspannung: DC 4,75~5,25 V Eingangsstrom: 2000mAh Nennausgangsspannung: DC 5,0 V +/-0,25 V Ausgangsstrom: 1000mAh/2000mAh Ladedauer bis zur vollen Kapazität: 6-8 Stunden Capacité : 3,7 V/11000 mAh Tension d’entrée : CC 4,75~5,25 V Intensité d’entrée : 2000mAh Tension de sortie nominale : CC 5,0 V+/- 0,25 V Intensité de sortie : 1000mAh/2000mAh Durée de chargement jusqu’à la capacité totale : 6-8 heures. Portable Power Bank PB11000 Manual del usuario Manuale dell’usario Handleiding Gracias por haber comprador el cargador V7. Lea este manual del usuario para asegurarse de utilizarlo de un modo seguro y satisfactorio. Guárdelo para poder consultarlo más adelante. Grazie per aver acquistato questa batteria esterna V7. Per procedere in modo sicuro e corretto, leggere attentamente le seguenti istruzioni. Conservare il manuale per un uso futuro. Come caricare la batteria esterna: inserire il connettore Micro USB del cavo di ricarica nell’ingresso Micro USB (Input) della batteria esterna, Indicatori LED di capacità: poi inserire il connettore USB del 1 luce accesa: 0-25% cavo alla porta USB 2 luci accese on: 25-50% dell’alimentazione (Figura 1: 3 luci accese : 50-75% adattatore da parete o Figura 2: 4 Luci accese: 75-100% porta USB del computer). Dank u voor de aanschaf van de V7 powerbank. Lees deze handleiding alstublieft voor een veilige en goede werking. Bewaar deze voor later. Pulse el “interruptor de encendido/apagado” para encender el cargador. Las luces indicadoras LED se iluminarán para indicar la capacidad energética restante. Las luces se apagarán automáticamente después de 10 segundos. Capacidad del LED: 1 luz encendida: 0-25% 2 luces encendidas 25-50% 3 luces encendidas: 50-75% 4 luces encendidas75-100% Micro de entrada USB Salida USB Uscita USB Ingresso Micro USB van het apparaat. Het LED aan/uit-signaallampje gaat aan en laat u zien hoever het apparaat geladen is. De lampjes gaan na 10 seconden automatisch uit. LED-vermogen: 1 lampje aan: 0-25% 2 lampjes aan: 25-50% 3 lampjes aan: 50-75% 4 lampjes aan: 75-100% Micro-USB-ingang Interruptor de encendido/apagado LED linterna Luz intermitente LED: Pulse el “interruptor de encendido/apagado” durante 3 segundos y la luz intermitente se encenderá. Para apagar la luz intermitente, empuje el botón por 3 segundos. Carga desde el cargador: Conecte el conector Micro USB del cable de carga en la “Entrada Micro USB” del cargador, a continuación conecte el conector USB en el puerto USB de la fuente de alimentación (Figura 1: Adaptador de pared o Figura 2: Puerto USB del ordenador). Carga desde el adaptador Carge desde es USB Power Aan/Uit LED lampeggiante Come caricare il dispositivo: inserire il connettore USB del cavo fornito con il dispositivo nell’uscita USB (Output). Collegare l’altro capo al dispositivo da ricaricare (Figura 3). Il processo di carica inizia automaticamente. Dopo 20 secondi l’indicatore di carica si spegnerà entrando nella modalità di risparmio energetico. Carica mediante adattatore Capacidad: 3,7 V/11000mAh Tensión de entrada: 4,75 ~ 5,25 V de CC Corriente de entrada: 2.000 mAh Tensión nominal de salida: 5,0 V +/- 0,25 V de CC Corriente de salida: 1.000 mAh/2.000 mAh Tiempo de carga para alcanzar la capacidad máxima: 6-8 horas LED lampeggiante: LED zaklamp accendere la batteria. Gli indicatori LED si accenderanno, indicando la capacità rimanente della batteria. I LED si spengono automaticamente dopo 10 secondi. Carica mediante USB Carga del teléfono móvil Carga del dispositivo: Conecte el conector USB del cable que viene con el dispositivo en la “Salida USB”. Conecte el otro extremo de este cable en el dispositivo. (Figura 3) El proceso de carga se iniciará automáticamente. Después de 20 segundos, el indicador de alimentación se apagará y entrará en el modo de ahorro de energía. USB-uitgang Carica del telefono Come caricare il dispositivo: inserire il connettore USB del cavo fornito con il dispositivo nell’uscita USB (Output). Collegare l’altro capo al dispositivo da ricaricare (Figura 3). Il processo di carica inizia automaticamente. Dopo 20 secondi l’indicatore di carica si spegnerà entrando nella modalità di risparmio energetico. Caratteristiche tecniche: Capacità: 3.7V/11000mAh Voltaggio in ingresso: DC 4.75~5.25V Corrente in ingresso: 2000mAh Voltaggio in uscita stimato: DC 5.0V+/- 0.25V Corrente in uscita: 1000mAh/2000mAh LED signaallampje: Druk 3 seconden lang op de signaallampje gaat aan. Om het signaallampje uit te zetten, druk weer 3 seconden lang op het knopje. Opladen van de powerbank: Steek de micro USB-stekker van uw oplaadkabel in de “Micro USB-input” op de powerbank. Steek dan de USB-stekker van de kabel in de USB-poort van de elektriciteitsaanvoer (Figuur 1: muurstopcontact, of Figuur 2: USB-poort van de computer) Adapter voor wisselstroom Computer USB-poort Opladen mobiel Opladen van uw apparaat: Steek de USB-stekker van uw apparaatkabel in de “USB Output”. Sluit het andere eind van deze kabel aan op uw apparaat (Figuur 3). Het oplaadproces begint automatisch. Na 20 seconden gaat het indicatorlampje vanzelf uit en gaat het apparaat in de ‘power-saving’- modus. Vermogen: 3.7V/11000mAh Inputspanning: DC 4.75~5.25V Inputstroom: 2000mAh Geschatte outputspanning: DC 5.0V+/- 0.25V Outputstroom: 1000mAh/2000mAh Oplaadtijd naar vol vermogen: 6-8 uur.